PP7252 - Hair straightener SOLAC - Free user manual and instructions

Product Type	Hair Straightener
Brand	SOLAC
Model	PP7252
Power Supply	Mains 220-240V / 50-60Hz
Maximum Temperature	210°C
Temperature Range	180°C to 210°C (electronically adjustable)
Plate Material	Ceramic
Heat-up Time	Ultra-fast: 40 seconds
Display	Digital screen with temperature and status
Main Functions	Straightening, curling, adding volume, flipping ends in or out
Safety	Auto shut-off after 20 min, cool tips, swivel cord
Cord	360° swivel
Included Accessories	Thermal storage bag
Maintenance	Clean plates with a damp cloth, device cold and unplugged
Dimensions (approx.)	About 28 cm length
Weight (approx.)	About 300 g
Use	Household only
Warranty	According to SOLAC standards

Frequently Asked Questions - PP7252 SOLAC

How to turn on and adjust the temperature of the SOLAC PP7252 straightener?

Plug in the device, press the On/Off button (1). Use the temperature adjustment button (3) to select the temperature suited to your hair (from 180°C to 210°C). The screen flashes during heating and becomes solid when the temperature is reached.

What temperature should I choose for my hair?

For very curly and thick hair: 210°C. For curly/thick hair: 200°C. For normal wavy hair: 190°C. For fine, dyed, or damaged hair: 180°C.

How long does it take for the iron to heat up?

The SOLAC PP7252 straightener is ready to use in 40 seconds thanks to its high-performance professional heating element.

Can I use the straightener on wet hair?

No, never use the iron on wet hair. Hair must be perfectly dry to avoid damage and for optimal results.

How to clean the straightener plates?

Unplug the device and wait for it to cool. Clean the plates with a damp cloth, then wipe them dry with a dry cloth. Do not use abrasive products or solvents.

The straightener turns off by itself, is that normal?

Yes, the SOLAC PP7252 is equipped with a safety auto shut-off: it turns off after 20 minutes of inactivity. This is a safety feature to prevent accidents.

How to get curls with this straightener?

Take a section of hair, place it between the plates, then wrap it around the iron by turning your wrist. Hold for a few seconds then release. For more natural curls, use thicker sections.

Can I use styling sprays or gels before straightening?

No, never use flammable substances (gel, hairspray, etc.) on hair before using the iron. This could damage the device or cause burns.

What to do if the power cord is damaged?

If the cord is damaged, it must be replaced by the manufacturer, its after-sales service, or a qualified professional to avoid any danger. Do not use the appliance.

Is the straightener suitable for all hair types?

Yes, thanks to the electronic temperature adjustment from 180°C to 210°C, it is suitable for all hair types: fine, thick, curly, dyed, or natural. Adjust the temperature according to your needs.

USER MANUAL PP7252 SOLAC

Congratulations for having chosen a SOLAC brand product. Our products are designed and manufactured to fully satisfy the most demanding expectations of our clients for a long period of time. You can also rest assured that SOLAC electrical appliances have passed the strictest quality and safety standards.

In its effort to make ongoing improvements, SOLAC reserves the right to make changes to its electrical appliances without giving notice.

1 Safety Instructions

• Read these instructions carefully before using the appliance.
  This manual is an essential part of the product. Keep it in a safe place for future reference.
• This appliance is for domestic use and is not suitable for industrial use. Using the appliance for any purpose other than those indicated could be dangerous.
• Keep the appliance and its packaging out of the reach of children and the disabled at all times. When used in their presence, exercise extreme caution.
• This appliance is not suitable for use by persons (including children) whose physical, sensorial or mental abilities are impaired, or who lack sufficient experience or knowledge, unless they are supervised and instructed on the use of the appliance by a person responsible for their safety.
  Children must be supervised to ensure they do not play with the appliance.
• Do not make any modifications to the appliance and do not repair it.
• If the power cord is damaged, it should be replaced by the manufacturer or by your after-sales service shop or similar qualified personnel to prevent possible hazards.
• Do not use parts or accessories not supplied or recommended by SOLAC.
• Before plugging the appliance into the mains, check the voltage indicated is the same as that in your home.
• Always unplug the appliance after use and before assembling or dismantling any parts or carrying out any maintenance or cleaning tasks. Unplug in the event of a power cut. The appliance should be switched off when you plug it in or unplug it.
• Never pull the cable or use it to hang up the appliance. Unplug the appliance using the plug, never the cable.

Do not use near bathtubs, sinks, showers or other recipients containing water. If it falls into water, do NOT try to pick it up. Unplug it immediately.

• Never immerse the main body in water or any other liquid, or put it in the dishwasher. The appliance should not come into contact with water during cleaning.
• Never leave the appliance outdoors and exposed to the elements.
• Do not touch the appliance with wet hands when in operation.
• Never immerse the appliance in water or use it while taking a bath or shower. Avoid splashing water on the appliance or the power cord.

• Never leave the appliance working on a wet surface or cloth.
• Never leave the appliance connected to the mains unsupervised.

IMPORTANT: When you want to dispose of the appliance, NEVER throw it in the rubbish bin. Take it to your nearest CLEAN POINT or the waste collection centre closest to your home for processing. You will thus be helping to take care of the environment.

2 Description

Main parts

1 On/off button
2 Temperature selection screen
3 Temperature selection button
4 Plates with ceramic coating
5 Swivel cable
6 Cool touch points
7 Hanging ring
8 Thermal bag

3 Features of the Lissé hair straightener

Advance Movement Technology: straight and curly hair

• This model has tilting plates, and the slight movement allows the plates to adapt to the hair without exerting pressure or pulling. The plates glide along the hair easily, smoothly, without pulling. This feature makes it much easier to straighten, wave, curl and give volume to the hair.

Ultra fast heating

• These straighteners have a high-performance professional element, which makes it ready to use in just 40 seconds.

It adapts to you: Intelligent temperature control

• Thanks to its advanced temperature control system, which uses a sophisticated microprocessor and its display screen, you can adjust the temperature of the plates to your hair type.

Electronic temperature regulation

• Temperatures of between 180^ C and 210^ C can be chosen, to adapt the straighter setting to your hair type.

Electronic temperature control

• The straightener uses an electronic microprocessor to control the plate temperature, ensuring even temperature distribution throughout the plate when straightening.

Temperature selection display

• The display screen provides a simple, practical display showing the selected temperature and whether the straighter is off, warming up or ready for straightening.

Safety auto-off system

• For safety reasons the straighteners will switch themselves off after 20 minutes if not touched.

4 Use

This appliance has been designed to wave, curl, curl ends in and out, add body and straighten hair.
While operating, the plates may reach temperatures of up to 210^ . The plastic parts near the ceramic plates may also be hot. Do not allow the hot parts to come close to the skin to avoid possible burns.
Under no circumstances should you use flammable substances (gel, etc.) on your hair before using the straighteners.
Do not use the straightener on wet hair.

Recommended temperatures

	HAIR TEXTURE AND CONDITION	TEMPERATURE
	Very curly, strong hair, for a quick, profes-sional result	210 °C
	Curly and/or thick hair	200 °C
	Wavy hair, normal texture	190 °C
	Fine, porous, dyed, bleached or high-lighted hair	180 °C

Operation

1 Place the straightener on a flat, heat-resistant surface.
2 Plug it in.
3 Press the "On" button (1), and the white "minimum temperature" icon (180^) will turn on, showing that the straightener is operating, (Fig. 1).
4 Select the ideal temperature for your type of hair by pressing the temperature selector (3) (Fig. 2). The temperature selector starts at the coolest temperature gradually moving up to the maximum setting.
While heating, the icon of the selected position will flash.
When the selected temperature has been reached, the icon will stay on permanently (Fig. 3).
The straightener will maintain the preselected temperature constant.

To straighten (Fig. 4)

1 Take a lock of hair (approximately 4 cm wide) and place it between the plates. Close them and slide the straightener down the lock of hair from the roots to the tips.
2 Repeat this operation until all your hair is completely straight.
For best results, we recommend you begin with the lower layers of hair and continue with the top layers.

To curl tips outwards (Fig. 5)

1 Place the tip of the lock of hair between the plates and close them.
2 Turn the straightener outwards as if it were a hairbrush.
3 Keep it in this position for a few seconds.

To curl tips inwards (Fig. 6)

1 Place the tip of the lock of hair between the plates and close them.
2 Turn the straightener inwards as if it were a hairbrush.
3 Keep it in this position for a few seconds.

To add body (Fig. 7)

1 Place the lock of hair between the plates at the roots and close them.
2 Place the lock of hair in vertical position with a slight forward movement to add the desired volume.

To wave (Fig. 8)

1 For a wavy or curly look, separate vertical locks so the curls fall more naturally.
2 Take thicker sections for bigger curls or natural-looking waves and finer strands for romantic ringlets and tighter curls.
3 Wrap each lock of hair around the straightener using a circular motion (as through it were a round brush) to get a wave and ringlet-shaped lock.
4 Wrap the hair around as you slide the straightener downwards.

5 After Use

1 Switch off the straightener using the on/off button (1).
2 Unplug the appliance.
3 You can use the thermal bag to store the straightener, even if the plates are still hot.

6 Cleaning and Storage

Only clean the appliance when it is cold. Do not use solvents, detergents or abrasive products.

1 Unplug the appliance.
2 Use a dry cloth to clean the outside.
3 Clean the plates with a damp cloth and then dry them.

. FRANÇAIS

i Chere cliente,

Para retirar as pontas (fig. 5)

Para colocar as pontas (fig. 6)

Temperature consigilate

Zalecane temperature

Preporucene temperature

	TEKSTURA I STANJE KOSE	TEMPERATURA
	Veoma kovrčava i Čvrsta kosa, za brzi profesionalni rezultat	210 °C
	Kovrčava i/ili gusta kosa	200 °C
	Valovita kosa, srednja gustoća	190 °C
	Tanka, oštećena, obojana, izblijećena ili kosa s pramenovima	180 °C

Rad

1 Glacalo postavite na ravnu povrsinu, otpornu na topliu.
2 Priključite ga na elektricnu mrežu.
3 Pritisnite tipku "on" (1) i bijela ikona koja označava "minimalnu temperaturu" (180^) ce se uključiti, označavajući rad urežaja (sl. 1).
4 Odaberite idealnu temperaturu za vaš tip kose pritiskom na izbornik (3) (sl. 2) Tipka za odabir temperature započinje na najnižoj temperaturi postupno se krećuci prema majvišoj postavci.
Za vrijeme zagrijavanja, ikona odabrane temperature ce treperiti.
Kada je odabrana temperatura postignuta, ikona ce se trajno ostati na toj temperaturi (sl. 3).
Glaçalo ce konstantno odžavati unaprijed odabranu temperaturu.

Ravnanje kose (slika 4)

1 Umetnite uvojak kose (oko 4 cm širine) izmeū ploča. Zatvorite ploce i povucite glacalo nadolje od korijena do vrhova kose.
2 Ponavljaje ovaj postupak sve dok cijela kosa ne bude potpuno ravna.

Za optimalan učinak, postupak započnite na donjim slojevima kose i nastavite prema visim slojevima.

Izvijanje vrhova (slika 5)

1 Umetnite vrh uvojka izmeudu ploca i zatvorite ih.
2 Okrenite glacalo prema vani kao kad radite s cetkom.
3 Ostavite ga u tom položaju nekoliko sekundi.