RCCF-65W4 - Washing machine Royal Catering - Free user manual and instructions

Product type	Chocolate fountain
Brand	Royal Catering
Model	RCCF-65W4
Dimensions (L x W x H)	38 x 38 x 80 cm (approx.)
Weight	8 kg (approx.)
Power supply	230 V ~ 50 Hz
Rated power	250 W
Heating temperature	Up to 110 °C, adjustable
Chocolate capacity	6 kg
Main material	Stainless steel
Switches	Separate for heating (HEAT) and motor (MOTOR)
Temperature regulator	Yes
Auger	Yes, to circulate the chocolate
Fountain tower	Removable
Container	Removable
Care and cleaning	Clean after cooling with a damp cloth and mild detergent
Safety	Grounding required, do not immerse, do not open the housing
Operating environment	Indoor, flat and stable surface, ambient temperature ≤ 45 °C
Spare parts and repairability	Seals, auger, container, tower; repair by qualified professional
General information	Manufacturer warranty; manual in French

Frequently Asked Questions - RCCF-65W4 Royal Catering

What is the power of the RCCF-65W4 chocolate fountain?

The RCCF-65W4 chocolate fountain has a rated power of 250 W and operates on a voltage of 230 V ~ 50 Hz.

How do I use the chocolate fountain?

Fill the container with chopped or melted chocolate, turn on the heating (HEAT switch), wait until the chocolate is completely melted, then activate the auger (MOTOR switch). During operation, you can add melted chocolate, but never unmelted chocolate.

What type of chocolate can be used?

The appliance accepts any type of chocolate, except those containing hard or firm elements (almonds, nuts, etc.) that could block the auger. It is recommended to chop the chocolate before melting it.

How do I clean the fountain after use?

Wait until the appliance has cooled completely, unplug it, then clean the removable parts with a mild detergent. Rinse and dry all parts thoroughly before using the appliance again.

What should I do if the chocolate is not fluid enough?

You can add food-grade fats such as oil to make the chocolate more fluid.

Is the appliance easy to disassemble?

Yes, the auger, tower, and container are removable for cleaning. Simply unscrew the container, tower, etc., following the instructions in the manual.

What safety precautions should I follow?

Use a grounded outlet, never immerse the appliance in water, do not open it, and check the condition of the cable. Have it repaired by a professional in case of malfunction.

Can I leave chocolate in the fountain after use?

No, always remove the chocolate from the channel, otherwise it can cause a clog. Clean thoroughly after each use.

How do I replace the fountain's seal?

Unscrew the container, remove the upper and lower seals, then install the new rings, making sure they are in contact with the motor shaft.

How do I adjust the temperature?

Turn the temperature regulator to the desired position (up to 110 °C). Wait for complete melting, then slightly reduce the temperature to keep the chocolate fluid without burning it.

USER MANUAL RCCF-65W4 Royal Catering

Deutsch	3
English	7
Polski	11
Česky	15
Français	19
Italiano	23
Español	27
Magyar	31
Nederlands	35

PRODUKTNAME	SCHOKOLADENBRUNNEN
PRODUCT NAME	CHOCOLATE FOUNTAIN
NAZWA PRODUKTU	FONTANNA CZEKOLADOWA
NÁZEV VÝROBKU	FONTÁNA NA ČÓKOLÁDU
NOM DU PRODUIT	FONTAINE À CHOCOLAT
NOME DEL PRODOTTO	FONTANA DI CIOCCOLATO
NOMBRE DEL PRODUCTO	FUENTE DE CHOCOLATE
TERMĚK NEVE	CSOKOLÁDÉ SZÓKÓKÚT
PRODUCTNAAM	CHOCOLADEFONTEIN
MODELL
PRODUCT MODEL
MODEL PRODUKTU
MODEL VÝROBKU	RCCF-65W
MODĚLE	RCCF-230W
MODELLO	RCCF-65W4
MODELO	RCCF-210
MODELL
MODEL
HERSTELLER
MANUFACTURER
PRODUCENT
VÝROBCE
FABRICANT	EXPONDO POLSKA SP. Z O.O. SP. K.
PRODUTTORE
FABRICANTE
TERMELŐ
FABRIKANT
ANSCHRIFT DES HERSTELLERS
MANUFACTURER ADDRESS
ADRES PRODUCENTA
ADRESA VÝROBCE
ADRESSE DU FABRICANT	UL. NOWY KISIELIN-INNOWACYJNA 7, 66-002 ZIELONA GÓRA | POLAND, EU
INDIRIZZO DEL PRODUTTORE
DIRECCIÓN DEL FABRICANTE
A GYÁRTÓ CÍME
ADRES VAN DE FABRIKANT

RCCF-230W | RCCF-65W4

1. Ring entfernen

1. Schmieren

IMPORTANT! More language versions are available upon request via [e-mail].

SAFETY INSTRUCTIONS

General safety information for the use of electrical devices:

To avoid injury from fire or electric shock, please ensure compliance with safety instructions when using this device. Please read the instructions carefully and make sure that you have understood them well. Keep the manual near the equipment to be able to read it at any time. Always use current sources connected to the ground and providing the necessary voltage (indicated on the label on the device). If you have any doubt, let an electrician check that your outlet is properly grounded. Never use a damaged power cable.

Do not open the unit in damp or wet environment, or if your hands or body are damp or wet. Protect the unit from solar radiation. Use the device in a protected location to avoid damaging the equipment or endangering others. Make sure the device is able to cool and avoid placing it too close to other devices that produce heat. Before cleaning, disconnect it from the power source. Use a soft damp cloth for cleaning.

Avoid using detergents and make sure that no liquid enters the unit. No internal element of this device needs to be maintained by the user. Opening the device without our approval leads to a loss of warranty.

SAFETY GUIDELINES

I. Please read and understand these instructions carefully before operating the device! Please observe the safety guidelines carefully in order to prevent damages through improper use!
2. Please keep this manual available for future reference. If this device is passed on to third parties, the manual must be passed on with it.
3. Only use this device indoors and for its intended use.
4. We do not offer any warranty for damages resulting from improper use or incorrect operation.
5. Check before first use whether main voltage type and current comply with the indicated data on the type plate.
6. This device is not intended to be used by persons (including children) with limited physical, sensory or mental aptitude or lack of experience and/or knowledge, unless they are supervised by a person responsible for their safety or have received instruction from this person as to how the device is used.
7. ELECTRICAL SHOCK HAZARD! Do not attempt to repair the unit yourself. In case of device failures, repairs must be done by qualified experts.
8. Please check main plug and power cable regularly. If the power cable for this device is damaged, it has to be replaced by the manufacturer or its customer service or another qualified person in order to prevent hazards.
9. Prevent damages to the power cable by avoiding squeezing or bending it or rubbing it on sharp edges. Also keep the power cable away from hot surfaces and open flames.
10. ATTENTION! DANGER TO LIFE! While cleaning, never immerse the device in water or other liquids.
II. Open the housing under no circumstances.

TECHNICAL DATA

Product name	Chocolate Fountain
Model	RCCF-65W	RCCF-230W	RCCF-65W4	RCCF-210
Rated voltage [V]/ Frequency [Hz]	230~V±10% / 50Hz
Rated power [W]	65	250	250	250
Temperature range [°C]	45 (constant, non-adjustable)	Up to 110	Up to 110	Up to 110
Chocolate capacity [kg]	2	6	6	6

SCOPE OF APPLICATION

The chocolate fountain for chocolate fondue is suitable for all different kinds of chocolate except chocolate containing solid parts (such as almonds, nuts, etc.). Such parts may clog the auger. It is recommended to crumble chocolate before melting it. Chocolate melted earlier in another device can also be used.

If the melted chocolate is not liquid enough try adding some cooking oil.

The user is liable for any damage resulting from non-intended use of the device!

BEFORE FIRST USE

Upon receipt of the goods, check the packaging for integrity and open it. If the packaging is damaged, please contact your transport company and distributor within 3 days, and document the damages as detailed as possible. Do not turn the package upside down! When transporting the package, please ensure that it is kept horizontal and stable. Please keep all packaging materials (cardboard, plastic tapes and Styrofoam), so that in case of a problem, the device can be sent back to the service centre in accurate condition.

SERVICE ENVIRONMENT

The temperature of the environment must not be higher than 45° C and the relative humidity should be less than 85%. Keep the device away from hot surfaces. Operate the device on flat, stable, clean, refractory and dry surfaces out of the reach of children and people with mental disabilities. Install the device making sure that constant access to the main plug is ensured. The power cord connected to the appliance must be properly grounded and correspond to the technical details. Before first use, remove all elements and clean them along with the entire device.

I. auger
2. tower
3. heating switch push-button
4. fountain (auger) switch push-button

Fill the bowl with chocolate (crumbled or already melted earlier). Switch the heating on and wait until chocolate melts completely. Switch the auger on. More melted chocolate can be added while the device is running. Never add unmelted chocolate when the auger is running – it may clog the auger and damage the device.

CAUTION: Inappropriate use leads to warranty loss!

RCCF-230W | RCCF-65W4

I. snap ring (only for RCCF-230W)

1. auger

2. vents

3. temperature controller

4. power cord connection

5. heating / fountain switch push-button

6. engine axis

7. sealing rings

8. bowl (the bowl is screwed on to the device)

9. auger mounting pin (only for RCCF-230W)

II. tower (the tower is screwed on to the bowl)

Assembly / disassembly of the device's elements:

Screw the bowl to the device, then mount the auger on the pin. Slide the tower on the auger and screw it to the bowl. Stabilize the auger with the snap ring. Disassembly is done in the reverse order.

Replacement of sealing ring

I. Unscrew the bowl

1. Remover top sealing ring

1. Remove bottom sealing ring

1. Discard ring

1. Prepare new ring – turn it upside down

1. Lubricate

1. Put the ring on engine axis

1. Put on the top ring

1. Make sure that both rings are adjacent to each other

RCCF-210

I. snap ring
2. auger
3. tower
4. bowl
5. heating switch push-button „Heat”
6. fountain switch push-button (auger) „Motor”
7. temperature controller

Fill the bowl with chocolate (crumbled or already melted earlier). Set the temperature controller to “0”. Switch the heating on, then set the highest temperature and wait until chocolate melts completely. Switch the auger on. Lower the heating temperature, at a level which allows to keep the chocolate in a liquid form (temperature depends on the outside conditions around the fountain). More melted chocolate can be added while the device is running.

Never add chocolate pieces or unmelted chocolate and also be careful when dipping products in chocolate so that they do not fall into the fountain when the auger is running – it may clog the auger and damage the device.

CAUTION: Inappropriate use leads to warranty loss!

RCCF-230W | RCCF-65W4

I. Odkręcić mise.

1. Usunąć pierścień.

1. Nasmarować.

RCCF-230W | RCCF-65W4

1. Odšroubujte mísu.

1. Odstraňte prstenec.

1. Namažte.

1. Nasad'te prstenec na osu motoru.

RCCF-230W | RCCF-65W4

1. Retirer l'anneau

1. Lubrifier

RCCF-230W | RCCF-65W4

1. rimuovere l'anello

1. lubrificare

I. Tornillo sin fin
2. Torreta
3. Interruptor del calentador („Heat“)
4. Interruptor de la fuente (tornillo sin fin) („Fountain“)

RCCF-230W | RCCF-65W4

I. Desenroscar plato

1. Retirar el anillo

1. Lubricar

1. Colocar la junta superior

RCCF-230W | RCCF-65W4

1. Dobja el a gyúrút

1. Kenje meg a címet

RCCF-230W | RCCF-65W4

For the disposal of the device please consider and act according to the national and local rules and regulations.

CONTACT

expondo Polska sp. z o.o. sp. k.