HT-TWIN 300 - Washing machine Hillvert - Free user manual and instructions

USER MANUAL HT-TWIN 300 Hillvert

HT-TWIN 550

The user manual is designed to assist in the safe and trouble-free use of the device. The product is designed and manufactured in accordance with strict technical guidelines, using state-of-the-art technologies and components. Additionally, it is produced in compliance with the most stringent quality standards.

DO NOT USE THE DEVICE UNLESS YOU HAVE THOROUGHLY READ AND UNDERSTOOD THIS USER MANUAL.

To increase the product life of the device and to ensure trouble-free operation, use it in accordance with this user manual and regularly perform maintenance tasks. The technical data and specifications in this user manual are up to date. The manufacturer reserves the right to make changes associated with quality improvement. The device is designed to reduce noise emission risks to a minimum, taking into account technological progress and noise reduction opportunities.

LEGEND

Read instructions before use.

WARNING! or CAUTION! or REMEMBER! Applicable to the given situation. (general warning sign).

PLEASE NOTE! Drawings in this manual are for illustration purposes only and in some details may differ from the actual product.

The original operation manual is written in German. Other language versions are translations from the German.

USAGE SAFETY

ATTENTION! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in serious injury or even death.

The terms "device" or "product" are used in the warnings and instructions to refer to FOLDING GARDEN CART.

a) If you are unsure about whether the product is operating correctly or if you find damage, please contact the manufacturer's service centre.
b) Keep the device in perfect technical condition. Before each use check for general damage and especially check for cracked parts or elements and for any other conditions which may impact the safe operation of the device. If damage is discovered, hand over the device for repair before use.
c) Device repair or maintenance should be carried out by qualified persons, only using original spare parts. This will ensure safe use.
d) Do not put more than 300kg (HT-TWIN 300) / 550kg (HT-TWIN 550) into the load area.
e) The product is not intended for children, it is not a toy.
f) Distribute the load weight evenly over the entire surface.
g) In case of damage or destruction of any of the components, it is necessary to cease using them.
h) Do not use the truck on surfaces / areas that may cause damage of tires.
i) The tire inflation pressure must not exceed 40 PSI.

ACHTUNG! Despite the safe design of the device and its protective features, and despite the use of additional elements protecting the operator, there is still a slight risk of accident or injury when using the device. Stay alert and use common sense when using the device.

USE GUIDELINES

The folding garden trolley is designed for transporting plants, soil and garden accessories.

The user is liable for any damage resulting from unintended use of the device.

DEVICE DESCRIPTION

HT-TWIN 300

1	Trolley base	1x
2	Side panel	2x
3	Front/rear panel	2x
4	Front hook	1x
5	Handle	1x
6	Wheel	4x
7	Front bracket	1x
8	Rear bracket	1x
9	"B" pin	8x
10	M8x15 screw	8x
11	Pin	5x
12	M8 washer	9x
13	M16 washer	5x
14	M8 nut	9x
15	M8x58 screw	1x
16	Plastic joint	1x

EN

HT-TWIN 550

A	Trolley base	1x
B	Front axle	1x
C	Rear axle	1x
D	M14 nut	2x
E	M14 washer	2x
F	Handle bracket	1x
G	Thrust bearing	1x
H	Handle	1x
I	Wheel	4x
J	Side barrier	2x
K	Rear barrier	1x
L	Front barrier	1x
M	Pin	8x
N	M10 nut	2x
O	M16 nut	1x
P	M10x55 screw	2x
Q	M16x65 screw	1x
R	Pin	4x
S	M10 washer	2x
T	M16 washer	5x
U	M20 washer	1x
V	M20 nut	1x

PREPARING FOR USE/ DEVICE USE

ASSEMBLING THE APPLIANCE

HT-TWIN 300

1. Put the central axle on the front hook(4), put the hook spindle in the hole in the front bracket(7), put the washer(13) on it and secure it with the pin(11). Screw the front bracket(7) and rear bracket(8) to the trolley base(1) with the screw(10), washer(12), and nut(14). Tighten securely.

1. Place the wheels(6) on the ends of the front and rear brackets. Install the washer(13). Insert a pin(11) through the holes at the end of each axis and then bend its ends.

1. Align the holes in the side panels(2) with the side holes in the base of the trolley, then insert the B pins(9) through them. Perform the operation on each side of the trolley. Each panel is fixed with 2 pins.

1. Insert the end of the handle(5) into the plastic connector(16), then place the whole in the frame forks and align the holes of both elements. Insert the bolt(15) through the holes, fit the washer(12) and nut(14) and tighten.

HT-TWIN 550

1. Turn the base of the trolley around(A) and attach the rear axle(C) with the washers(E) and nuts(D). Place the thrust bearing(G) between the front axle(B) and the base, then put on the washer(U) and screw on the nut(V). Do not tighten the nut(V) too much, make sure that the front axle can turn.

1. Attach the handle bracket(F) to the front axle with the screws(P), washers(S) and nuts(N).

1. Fix the wheels(I) on the axle ends using nuts(T) and pins(R).

1. Turn the assembled trolley over, fasten the handle(H) to the handle post(F) with the screw(Q), washer(T) and nut(O).

EN

1. Attach the front and rear barrier(L and K) to the sides of the trolley base with the pins(M), and then the side rails(J). The hinges must be on the outside.

CLEANING AND MAINTENANCE

a) Use only non-corrosive cleaners to clean the surface.
b) Store the unit in a dry, cool place, free from moisture and direct exposure to sunlight.
c) The device must be regularly inspected to check its technical efficiency and spot any damage.
d) Use a soft, damp cloth for cleaning.
e) Periodically check tire pressure.

DANE TECHNICZNE

HT-TWIN 550

PL

CZYSZCZENIE I KONSERWACJA

HT-TWIN 550

ČIŠTĚNÍ A ÚDRŽBA

HT-TWIN 550

NETTOYAGE ET ENTRETIEN

HT-TWIN 550

HT-TWIN 550

LIMPIEZA Y MANTENIMIENTO

OUR CUSTOMERS' SATISFACTION IS OUR MAIN GOAL! PLEASE CONTACT US WITH QUESTIONS AT:

NASZYM GŁÓWNYM CELEM JEST SATYSFAKCJA KLIENTÓW W PRZYPADKU PYTAŃ PROSIMY O KONTAKT Z PRZEDSTAWICIELEM W DANYM KRAJU:

NAŠÍM HLAVNÍM CÍLEM JE SPOKOJENOST NAŠICH ZÁKAZNÍKŮ! V PŘÍPADĚ OTÁZEK NÁS PROSÍM KONTAKTUJTE NA:

NOTRE BUT PREMIER EST VOTRE SATISFACTION! POUR TOUTE QUESTION, CONTACTEZ NOUS SUR: