Surfcare Magic Waves Plasma - Curling iron CECOTEC - Free user manual and instructions
Find the device manual for free Surfcare Magic Waves Plasma CECOTEC in PDF.
User questions about Surfcare Magic Waves Plasma CECOTEC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Curling iron in PDF format for free! Find your manual Surfcare Magic Waves Plasma - CECOTEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Surfcare Magic Waves Plasma by CECOTEC.
USER MANUAL Surfcare Magic Waves Plasma CECOTEC
-
Parts and components
-
Before use
-
Operation
-
Cleaning and maintenance
-
Troubleshooting
-
Disposal of old electrical and electronic appliances 55
-
Copyright
-
Simplified EU Declaration of Conformity
SOMMAIRE
EU01_122572 SurfCare Magic Waves Plasma
EN • The coding in this manual is generic and applies to all code variants of the appliance.
Read the following instructions carefully before using the appliance. Keep this instruction manual for future reference or new users.
- This symbol means: Do not use this appliance in a bathtub, shower or near water.
- CAUTION: Do not use this appliance near bathtubs, showers, sinks or other vessels containing water.
- This appliance can be used by children aged 8 years and above and people with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision. - This appliance is intended for domestic use
only and is not suitable for use in commercial establishments such as bars, restaurants, farms, hotels, motels, and offices.
- When the hair dryer is used in a bathroom, unplug it after use as the proximity of water presents a hazard even if the dryer is switched off.
- Risk of burns. Keep the appliance out of the reach of children, especially during use and while it is cooling down.
- When the appliance is connected to the
mains, do not leave it unattended.
- Always place the appliance with the stand, if any, on a stable, flat, heat-resistant surface.
- Supervise children to prevent them from playing with the appliance.
- Check the power cord regularly for visible damage. If the power cord is damaged, it must be replaced by Cecotec's Official
Technical Support Service or similar qualified personnel to avoid risks.
- Ensure the mains voltage matches the voltage specified on the appliance's rating label and that the socket is properly earthed. - Do not immerse the cord, plug, or any other non-removable part of the appliance in water or any other liquid or expose electrical connections to water. Make sure your hands are dry before handling the plug or switching on the appliance. - Unplug the appliance immediately under the following circumstances: abnormal
operation, needs cleaning, and/or after use.
- Do not wind the power cord around the appliance.
- Keep your face, neck, and scalp away from the appliance.
- Do not place the appliance on any surface while in operation.
- Do not use the appliance on wigs, natural hair extensions, fake hair or animal hair.
- Keep all packaging materials away from children, as they may create a risk of
suffocation.
- Do not hold the appliance by the barrel or near it when switched on. The barrel can cause burns. Avoid contact with the skin and eyes.
- Do not carry the appliance if still hot. - Do not cover the cable or the appliance when operating. Keep the power cable away from the got parts of the appliance.
- Never wind the power cord around the appliance.
- Do not use the appliance if you have applied foam, spray, or gel to your hair beforehand.
- Do not unplug or carry the appliance by the power cable.
- Burn hazard. Keep the appliance out of the reach of children, particularly during use and while it is cooling down.
- Never leave the appliance unattended while connected to the mains power supply.
INSTRUCTIONS DE SÉCURITÉ
The graphics in this manual are schematic representations and may not exactly match the product.
2. BEFORE USE
This appliance comes in a packaging designed to protect it during transport. Remove the appliance from its box. You can keep the original box and other packaging materials in a safe place to prevent damage to the appliance if you need to transport it in the future. If you wish to dispose of the original packaging, make sure all items are recycled properly.
- Check that all parts and components are included and in good condition. If any of them are missing or damaged, please contact Cecotec's Official Technical Support Service immediately.
Box content:
- Hair curler
- Instruction manual
- Do not remove the product's serial number in order to keep proper traceability if technical assistance is required.
3. OPERATION
- Switching On: Press and hold the power button for 2 seconds to switch on the device. When switched on, the temperature will automatically adjust to Level 1 (160°C).
- Temperature setting: Press the power button to change the temperature. The white indicator lights will show the selected level: one light for Level 1 (160°C), two lights for Level 2 (185°C)
and three lights for Level 3 (210°C).
- Changing the cycle: Press the power button to switch between temperature levels: "Level 1 (Low), Level 2 (Medium), Level 3 (High)". When you reach Level 3, pressing again will take you back to Level 1.
- Switching Off: Press and hold the power button for 2 seconds to switch off the device. All lights will turn off and the hair curler will stop working.
Heating: The LED lights flash while the device reaches the desired temperature. Once reached, the lights remain fixed.
Temperature setting:
- As the temperature increases, the lights flash until it stabilises.
- When the temperature is decreased, the lights remain steady.
Fig. 2
- Rotation button
- Rotation switch
- Temperature level indicator lights
-
Power button
-
Press and hold the power button for 2 seconds to switch on the device.
- The device will automatically switch off after 10 minutes in standby mode.
- Ensure that your hair is dry before use; otherwise, the desired curling effect may not be achieved.
- The Plasma function is enabled by default when the product is turned on.
- The device features a memory function; the default temperature level when starting up is the one that was set when it was last switched off.
- After the product is heated to the set temperature, hold the handle and keep a safe distance between the heating tube and the skin/eyes.
Indicator lights instructions
- Level 1: One white LED light.
- Level 2: Two white LED lights.
- Level 3: Two white LED lights.
Step by step
-
Divide the hair into small sections, place a small section in the hair inlet, press the rotation button. The rotating hook will automatically curl the hair in the barrel.
-
A beep will sound after 8 seconds to remind you to release the hair (curling is complete).
-
For shorter hair, lightly press the rotation button to stop the device earlier; the beep will still sound after 8 seconds.
Note: Adjust the length of the curl according to the desired effect. Do not leave the hair wrapped for too long to avoid damaging it by overheating.
-
Move the device downwards to release the hair.
-
Use the left/right rotation button to select hairstyles with outward or inward curls.
Important tips
- It is normal to notice a slight burning smell when using the device for the first time. This will disappear with use.
- If you have fine hair or use high temperatures, avoid prolonged contact with the device to prevent burns.
- Adjust the temperature according to your hair type. Incorrect use can cause dryness or, in extreme cases, burns.
4. CLEANING AND MAINTENANCE
- Keep the product away from moisture.
-
Before cleaning, switch off the device and wait for it to cool down.
-
Do not immerse the product in water.
- Do not use sharp cleaning tools or products containing corrosive or volatile solvents.
-
Wipe with a soft, damp cloth, then dry with a dry cloth.
-
TROUBLESHOOTING
| Problem | Possible cause | Possible solution |
| The device does not switch on | The device is not correctly connected. | Check the connection to the plug. |
| The device does not heat up. | Problem with the heating element. | Check for blockages or contact the Technical Support Service. |
| Prolonged burning smell. | Initial use of the device. | Keep using it; the smell should disappear. |
| The hair does not curl properly. | Wet hair or incorrect temperature | Make sure the hair is dry and adjust the temperature. |
| The device switches off by itself. | Automatic shut-off function. | Turn the device back on if necessary. |
6. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
This symbol indicates that, according to the applicable regulations, the product and/or battery must be disposed of separately from household waste. When this product
reaches the end of its shelf life, you should dispose of the
batteries/accumulators and take them to a collection point designated by the local authorities.
For detailed information on how to properly dispose of electrical and electronic equipment and/or the corresponding batteries, consumers should contact their local authorities.
Compliance with the above guidelines will help protecting the environment.
Information regarding national packaging recycling systems and their marking can be found on our website.
7. COPYRIGHT
The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The content of this publication may not, either in part or in its entirety, be reproduced, stored in a retrieval system, transmitted or distributed by any means (electronic, mechanical, photocopying, recording or similar) without
prior authorisation from CECOTEC INNOVACIONES, S.L.
8. SIMPLIFIED EU DECLARATION OF CONFORMITY
CE Cecotec Innovaciones hereby declares that this appliance complies with the essential requirements and other relevant provisions of the regulations applicable
in the European Union. This appliance has been designed, manufactured and tested in compliance with required safety and quality standards. The full text of the EU Declaration of Conformity can be found on the following website: https://cecotec.es/es/information/declaration-of-conformity
1. PIÈCES ET COMPOSANTS
Image 1
Instructions relatives aux voyants lumineux
https://cecotec.es/es/information/declaration-of-conformity

Fig./Img./Abb./Afb./Rys./Obr./Şekil/Eik./ábra/1

Fig./Img./Abb./Afb./Rys./Obr./Şekil/Eik./ábra/2