Bolero Coolmarket Uf 206 Dual E - Refrigerator CECOTEC - Free user manual and instructions

USER MANUAL Bolero Coolmarket Uf 206 Dual E CECOTEC

SAFETY INSTRUCTIONS......8

ESPAÑOL....143

ENGLISH....157

FRANÇAIS....170

DEUTSCH....184

ITALIANO....198

PORTUGUÊS....211

NEDERLANDS....224

POLSKI....237

ČEŠTINA....251

MAGYAR....264

ΕΛΛΗΝΙΚΑ 277

TÜRKÇE....291

العربية....304

CATALÀ....315

FIGURES....328

NOTA

EU01_122371 Bolero CoolMarket UF 206 Dual Inox D EU01_122372 Bolero CoolMarket UF 206 Dual White E

EN • The coding in this manual is generic and applies to all code variants of the appliance.

Read the instructions carefully before using the appliance for the first time and keep this instruction manual for future reference or new users.

- It is important to make sure all users are familiar with the appliance's operation and safety features to

prevent faults and unnecessary accidents.

• Make sure that the mains voltage in your house matches the voltage stated on the rating label of the appliance.
• This appliance can be used by children aged 8 and above and people with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, as long as they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and maintenance should not be carried out by children without supervision.

• Children shall not play with the appliance.

- To avoid the risk of suffocation, keep the packaging material away from children.

- WARNING: If the interior lighting is damaged, please contact Cecotec's Official Technical Support Service. Do not attempt to repair it yourself (lighting only available on certain models).

- WARNING: When positioning the appliance, make sure that the power cord is not trapped or damaged. A crushed or damaged cord may heat up and cause a fire.

- Ensure that you can access the main connector on the appliance after installation (connector only available on certain models).

- Do not place food directly against the air outlet on the interior of the appliance.

• Keep the ventilation openings of the appliance clear from obstructions.
• Do not place carbonated or soft drinks inside the appliance when the freezer mode is activated, as pressure builds up in the can, which could explode and damage the appliance.
• WARNING: Do not use mechanical devices or other means to speed up the defrosting process other than those recommended by Cecotec.
• WARNING: do not damage the cooling circuit.
• WARNING: Do not use electrical devices inside the appliance.
• It is recommended to regularly check the power cord for any signs of damage. Do not use the appliance if the cord is damaged.
• If the cord is damaged, it must be replaced by Cecotec's Official Technical Support Service, the distributor or similarly qualified personnel to avoid any hazard.
• To avoid injuries or death caused by electric shock, do not use the appliance with your hands wet or over a wet surface.
• Do not pull on the power cord to unplug the appliance.
• When positioning the appliance, make sure there is enough free space at the rear, as it is the main heat outlet. This will allow for adequate ventilation.
• Do not place hot food or drinks in the appliance, allow them to cool to room temperature.
• Do not place any other appliance on the freezer and do

not wet it.

- Do not store explosive substances such as aerosols or flammable propellants inside the appliance.

- This appliance is exclusively designed for household use. Do not use it for commercial purposes, outdoors, or in damp environments.

- WARNING: To avoid any risk due to the instability of the appliance, install it following the instructions.

- This appliance has a built-in earthed plug. Make sure the power supply in your house is properly earthed.

- Wait 5 minutes after a power failure before turning the appliance back on. Otherwise, the compressor may get damaged.

- This appliance is not intended to be operated by means of an external timer or separate remote-control system.

- Always handle the appliance carefully to avoid damaging it.

- Frozen food can cause ice burns if consumed right after removing it from the freezer.

- Do not remove or touch freezer items with your hands wet, as it could cause skin abrasions or frost/freeze burns.

- Never use the base, drawers, or door as support.

- Do not place too much food on the drawers to prevent items from falling off and damaging the appliance.

- WARNING: Do not use power strips with multiple plugs, adapters, extension cords or multiple power supplies to connect the freezer. Make sure the

appliance is plugged in directly to a power supply.

- To avoid food contamination, please follow the instructions below:

a. Opening the door for a long period of time may cause a significant increase in temperature in the appliance compartments.

b. Regularly clean the surfaces that come into contact with food and with the accessible draining systems.

c. If the appliance remains empty for a long period of time, unplug it, defrost it, clean it, dry it, and leave the door open to prevent interior mould formation.

d. Store raw meat and fish in suitable containers so that they do not come into contact with or drip onto other foods.

e. The two-star compartments are suitable for storing pre-frozen food, storing or making ice cream, and making ice cubes.

f. Compartments with one, two, or three stars are not suitable for freezing fresh food*.

g. For appliances without a 4-star compartment: not suitable for freezing foodstuffs*.

*Please verify the applicability based on your product's compartment type. This feature varies according to the model purchased.

"4-star" symbol: Freezer compartment at -18°C or below, capable of fast-freezing a specified quantity of food.

"3-star" symbol: Freezer compartment at -18°C or below.

"2-star" symbol: Freezer compartment at -12°C or below.

"1-star" symbol: Freezer compartment with target temperature and storage conditions of -6°C .

- Before carrying out any maintenance and cleaning task, switch off the appliance and unplug it from the mains socket.

- It is advisable to wait for at least 4 hours before connecting the appliance to allow oil to flow through the compressor.

- Air must be able to circulate around the appliance; inadequate ventilation causes overheating. To achieve good ventilation, follow the installation instructions.

- Whenever possible, the rear part of the appliance should not be too close to the wall to prevent it from touching or reaching the hot parts (the compressor and the condenser). To avoid risk of fire, follow the installation instructions.

- Make sure that the plug is accessible after installation of the appliance.

- All electrical work required to maintain this appliance must be carried out by a qualified electrician.

- Unplug the appliance from the mains socket when not in use for extended periods.

- WARNING: If the interior lighting is damaged, please contact Cecotec's Official Technical Support Service. Do not try to repair it yourself.

- Cecotec disclaims all liability for any damage or injury caused as a result of failure to follow the installation and/or operating instructions contained in this instruction manual.

- Cecotec shall not be held liable for any damage, accident, or incident resulting from the misuse of this appliance. It is the responsibility of the user to operate and maintain the appliance according to the instructions and recommendations detailed in this manual. Failure to follow instructions may result in personal injury, property damage, or loss of product warranty.

- We are constantly working on the development and improvement of our appliance models and ranges. Therefore, we reserve the right to make changes to the design, equipment and accessories of all models and ranges without prior notice.

Refrigerant

- Isobutane refrigerant (R600a), contained within the refrigeration circuit of the appliance, is a natural gas with a high level of environmental compatibility; however, it is flammable. Make sure that no components of the refrigeration circuit have been

damaged during the transport and installation of the appliance.

- WARNING: The refrigerant and insulator gas (cyclopentane) are flammable. When disposing of the appliance, only dispose of it at an authorised waste-disposal facility. Do not expose it to flames.

- WARNING: This appliance contains refrigerant and gases in the insulation. The appliance and gases must be disposed of professionally, as they may cause injuries to eyes or ignition. Make sure the refrigeration-circuit pipe is not damaged before disposing of it correctly.

- The refrigerant charge is indicated on the appliance's rating plate.

- WARNING: Risk of fire. If the refrigeration circuit is damaged:

- If the cooling circuit is damaged, avoid open flames and sources of ignition.

- Fully ventilate the room where the appliance is located.

- Do not use mechanical, electrical or chemical means to speed up the defrosting process.

Climate class

This appliance is designed to operate within a specific room temperature range, according to its climate class. Do not use the appliance outside this temperature range.

Climate class	Optimal room temperature
SN	10 °C a 32 °C
N	16 °C a 32 °C
ST	16 °C a 38 °C
T	16 °C a 43 °C

Notes:

- Taking into account the ambient temperature range limit values for the climate classes for which the appliance is designed, and that internal temperatures may be affected by factors such as the freezer's location, ambient temperature, and frequency of door opening, it may be necessary to adjust the setting of any temperature control device according to these factors.

- If the appliance is operated in an environment other than the specified climate type (i.e. beyond the rated room temperature range), it may not be able to maintain the desired compartment temperatures.

Freon free (CFC-free refrigerant)

- This freezer uses freon-free refrigerant (R600a) and foaming insulation material (cyclopentane), which are environmentally friendly, do not cause damage to the ozone layer, and have a very low impact on global warming. R600a is flammable and does not leak during normal use when sealed in a refrigeration

system. In the event of refrigerant leakage due to damage to the refrigerant circuit, be sure to keep the appliance away from open flames and open the windows to ventilate as soon as possible.

• The use of this refrigerant causes a slight increase in the appliance's noise level.
• In addition to the compressor noise, you may hear the refrigerant flow. This is unavoidable and does not affect the appliance's performance.
• This symbol means: Warning, risk of fire/flammable materials.

- Be careful during transport and installation to avoid damaging the components of the refrigeration circuit.

WARNUNG: Sollte die

https://cecotec.es/es/information/declaration-of-conformity

ENGLISH

1. Parts and components

Fig. 1

1. LED light*
2. Thermostat / control panel
3. Shelves
4. Drawers
5. Adjustable feet

*Availability depending on model

Note:

• The graphics in this manual are schematic representations and may not exactly match the product.
• To improve quality, our products are constantly updated and their appearance and specifications may change.
• To make the most out of the freezer in terms of energy, place all the shelves and drawers in their original position, that is, as shown in Figure 1.
  ● Accessories may vary depending on the freezer model.

2. Before use

• This freezer includes a packaging designed to protect it during transport. Take the freezer out of its box. You can keep the original box and other packaging elements in a safe place, this will help you prevent product damage when transporting it in the future. If you wish to dispose of the original packaging, make sure all items are recycled properly.
• Check that all parts and components are included and in good condition. If any of them are missing or damaged, please contact Cecotec's Official Technical Support Service immediately.

Box content

• Freezer.
• Instruction manual
• Do not remove the product's serial number in order to keep proper traceability if technical assistance is required.

3. Installation

• IMPORTANT: Leave the freezer in an upright position for at least 4 hours before switching it on for the first time to allow the compressor oil to settle.
• Once connected, if you switch off the appliance, wait at least 30 minutes before switching it back on.

Initial cleaning

• Clean the appliance's interior with lukewarm water and neutral detergent. Dry the interior and all accessories thoroughly with a soft, clean cloth. Do not fit the accessories until they are completely dry.
  ● Use a dry cloth to clean the outside of the appliance.
• Do not use corrosive cleaners or metallic or abrasive scouring pads.

Preparing for use

• The location you choose for the freezer must be properly ventilated and far from heat sources. Do not place the freezer near heat sources, such as hobs, radiators, etc., and avoid direct sunlight to ensure the cooling effect and save on energy consumption. It is not recommended to place the appliance in a wet place, as it may rust and cause electrical leakage.
  ● Ensure the freezer is protected from weather conditions such as rain or wind.
• Placing the freezer in locations such as verandas or patios, even if they are covered, can lead to condensation.
• During operation, the freezer releases heat into the environment. Therefore, you should leave at least 30 mm of free space at the top, more than 100 mm on both sides, and more than 50 mm at the rear of the freezer. In addition, you must leave a minimum distance of 410 mm in front of the freezer to ensure that the door opens properly.

W (mm)	D (mm)	H (mm)	A (mm)	B (mm)	C (°)	E (mm)	F (mm)
550	565	1700	850	1045	125±5	50	100

Fig. 2

Note

Figure 2 only illustrates the space required for the freezer.

Stable surface

- Position the appliance on a smooth, firm, and level surface (without tilting) to keep

ENGLISH

it stable; otherwise, vibration and noise will occur.

• Do not place the appliance on soft surfaces such as carpets, etc.
  ● Ensure a ventilation free of obstacles around the freezer.

Levelling*

- Make sure you level the appliance with the front levelling feet. If it is not level, the refrigerator's performance will be affected, or it may even malfunction. In addition, the door may not close properly if it is not fully aligned with the appliance itself.

*Availability depends on refrigerator model.

Switching on

• Connect the plug into a power socket to switch on the freezer. After approximately two hours, open the freezer compartment door; if the temperature inside the freezer compartment has dropped, the cooling system is working normally.
• Wait at least 24 hours before storing food to ensure that the freezer has reached its optimal temperature.
• Once food has been placed inside, it may take several hours before it reaches the proper refrigeration/freezing temperature (the time may vary depending on multiple external factors, such as outside temperature, relative humidity, ventilation, etc.).
• If the freezer is installed in a damp location (not recommended), you should check that the earth cable and circuit breaker are working normally. If vibration noises occur due to contact of the freezer with the wall or if the wall turns black due to air convection around the compressor, remove the freezer from the wall.
• The installation of the freezer may cause interference in mobile phones, landline phones, radio receivers, or televisions near the refrigerator, so in this case, keep the freezer as far away from these objects as possible.

4. Operation

Fig. 3 Control panel

1. Coldest temperature LED indicator
2. Medium temperature LED indicator
3. Warmest temperature LED indicator
4. LED indicator for selection between freezer/refrigerator mode
5. Selection button

● The control panel is located inside the freezer.

- When the freezer is connected to the mains for the first time, the control panel will light up for 3 seconds and an acoustic signal will sound.

ENGLISH

● Each time you press a button, the confirmation beep sounds.
- If no button is pressed and the door remains closed for more than 1 minute, the control panel will enter "power saving" mode. Press any button or open the door to deactivate this mode.
- The default state of the appliance when first connected is medium temperature and freezer mode.

Functions

No Frost System

- The freezer features a No Frost system, which uses forced air circulation inside the appliance to largely prevent ice and/or frost build-up, thus eliminating the need for regular manual defrosting.

Change between the refrigerator and freezer modes

- Press and hold the selection button for 3 seconds to switch between refrigerator and freezer modes.

Temperature setting in refrigerator mode

• In refrigerator mode (selection LED light off), press the selection button briefly and cyclically to select the desired temperature: colder, medium, less cold.
  ● Each press will cause its corresponding LED indicator to illuminate and flash.
  ● After approximately 5 seconds of inactivity, the flashing of the light will stop and the temperature selection will have been confirmed.

Temperature setting in freezer mode

• In freezer mode (selection LED light on), press the selection button briefly and cyclically to select the desired temperature: colder, medium, less cold.
  ● Each press will cause its corresponding LED indicator to illuminate and flash.
• After approximately 5 seconds of inactivity, the flashing of the light will stop and the temperature selection will have been confirmed.

Approximate temperature ranges

Temperature settings	Refrigerator/Freeze r	Temperature (°C)	Temperature start and stop (°C)
Less cold		5	+/- 1.5
Medium	Refrigerator	3
Colder		0
Less cold		-18
Medium	Freezer	-20
Colder		-22	+/- 2

NOTE: These temperatures are approximate and may vary depending on external factors (temperature, humidity, etc.) and internal factors (quantity and type of food stored).

NOTE: The temperature is homogeneous, but variations may occur in certain parts of the interior.

Open door alarm

If the door is open for more than 2 minutes, the freezer will emit an alarm sound, which can be stopped by closing the door.

Function memory after power failure

In the event of a power failure, the freezer will save the functions set before the power failure and will activate them when the power is restored.

Delay Start

To prevent damage to the freezer compressor in the event of a short power failure (i.e. less than 5 minutes), the compressor will not start immediately after switch-on.

5. Food storage instructions

Use precautions

• The freezer may not operate consistently (there may be some defrosting of the contents or the temperature may become too hot) if placed in locations with a temperature outside of the temperature range for which it's designed for a long period of time.
• The internal temperature may be affected by factors such as the location of the freezer, room temperature, and door opening frequency, etc., and you should take these factors into account if you decide to use any temperature-control devices.
• Do not store effervescent or carbonated drinks inside the device when the freezer mode is active.

Food storage

● Refrigerator mode: it is suitable to store food that does not need to be frozen, cooked food, soft drinks, eggs, milk, juice, etc.

ENGLISH

• Freezer mode: suitable for storing ice cream, ice cubes, frozen foods and foods you wish to preserve for longer periods.
• Drawers: pull the drawer to access food.
  ● Always check that the door closes properly.

Storing fruits and vegetables

- It is recommended not to store fruits and vegetables in freezer mode, as these are fresh products that are very sensitive to cold.

Care for food storage

• Clean and dry food completely before storing it in the device. Before introducing food in the device, it is advisable to seal it to prevent water evaporation and thus keep fruit and vegetables fresh on the one hand, and to prevent odours on the other.
• Leave enough space between the food; if they are too close together, they will block the flow of cold air, which will affect the cooling effect. Do not store too much or too heavy food to prevent the shelves from bending. When storing food, leave a distance from the interior wall; do not place water-rich food too close to the rear wall of the appliance when the refrigerator mode is activated, to prevent them from freezing on the inside wall.
• Food storage by category: place daily food items at the front of the shelf so that you can reduce the door opening time and avoid food spoilage due to expiry.
• Please note that some foods are sensitive to cold and are therefore not suitable for storage in the appliance.

Use of the freezer mode

• This mode is advisable for storing food that you wish to keep for a long period of time, always respecting the storage time indicated on the food packaging.
• Store frozen products at a temperature of at least -18 °C (-18 °F).
• It is advisable to divide large-sized food into smaller pieces and put them in freezing bags before storing them in the freezer compartment drawers.
• Let hot food cool down to room temperature before putting it in the freezer compartment.
• Do not place glass containers with liquid or sealed liquid cans in the freezer to prevent them from exploding due to volume expansion when the liquid freezes.
• Food should be packed or covered with suitable materials that are firm, tasteless, impermeable to air and water, non-toxic, and non-polluting to avoid cross-contamination and odour transfer.

Tips on energy saving

• Locate the unit in the coolest part of the room, away from heat sources and direct sunlight.
• Allow hot food to cool to room temperature before placing it in the appliance.
• Do not open the door repeatedly or leave it open for long periods of time.
  ● Make sure that the door closes properly.
• Arrange the food inside in an optimal way to ensure cold air circulation.
  ● Store food in suitable containers to prevent moisture build-up.
• Do not overstock food. Do not place aluminium foil or absorbent paper on the shelves.

6. Cleaning and maintenance

If the freezer is not to be used for a long period of time:

• Switch off the freezer and disconnect the plug from the mains socket.
• Remove all the food.
• Clean and dry the interior completely. To prevent mould or unpleasant odours, leave the door slightly open: lock it open or remove it if necessary.
• Store the appliance in a well-ventilated, dry place away from heat sources; position the appliance carefully and do not place heavy objects on top of it (if it is not going to be used for a period of more than 3 weeks).
• The appliance must be kept out of the reach of children to prevent them from playing with it.

Before cleaning, disconnect the power plug; do not connect or disconnect the power plug with wet hands, as there is a risk of electric shock and injury. Do not pour water directly onto the freezer to prevent rusting, electrical leakage and accidents. Do not reach into the bottom of the freezer, as you may get scratched by the sharp metal corners.

Cleaning the interior and exterior

• Food residues in the freezer can cause undesired odours, so you should clean the freezer regularly. The refrigerator compartment should be cleaned once a month.
• Remove all drawers and clean them with a soft cloth or sponge dampened with warm water or neutral detergent.
• Clean the dust that accumulates on the rear panel and side plates of the freezer regularly.
  ● After using neutral detergent, make sure you rinse it with clean water, and then

ENGLISH

dry it with a cloth.

• Do not use bristle brushes, steel wire brushes, detergent, soap powder, alkaline detergent, benzine, petrol, acid, hot water, or other corrosive elements to clean the freezer surface, door gasket, plastic decorative parts, etc. to avoid damage.
• Carefully dry the door gasket and clean the slot with a wooden stick wrapped with cotton. After cleaning, fix the four corners of the door gasket and then gradually push it into the slot in the door.
• Once cleaning is complete, make sure that the power cord and plug are in good condition and undamaged.

Power failure or cooling system fault

• If you receive a power failure warning in advance, try to keep the appliance to contain as little food as possible and in any case do not store more food.
• Set the coldest temperature in advance.
• Do not open the door to avoid temperature loss.
  ● Ice cubes can be placed on top.
• Reset the desired temperature once the power supply is available again.

Note:

It is advisable to run the freezer uninterruptedly once you start using it.

Defrosting

This freezer includes an automatic defrost function, so there is no need to defrost it manually.

LED light replacement

The freezer has a LED light with low consumption and a long shelf life. In case of malfunction, contact the official Cecotec Technical Support Service. Only qualified personnel may replace the light.

Note:

If the power cord and/or plug are damaged or deteriorated, electric shocks and fires may occur. If there is any malfunction, disconnect the cord and contact the official Cecotec Technical Support Service.

7. Troubleshooting

For the following minor malfunctions, please try to solve the problem yourself before contacting the official Cecotec Technical Support Service.

Fault	Possible causes	Possible solutions
The freezer does not work	The freezer is not connected to the mains.The circuit breakers or fuses are damaged.There is no power supply	Connect the freezer to a power supply.Check the control and protection elements of the electrical panel in your home.Open the door and check that the light comes on (only on certain models)
Abnormal noise	The freezer is not stable.The freezer is in contact with the wall.	Adjust the legs.Remove the freezer from the wall.
Low cooling efficiency.	The food inside is hot or there is too much food.You open the door too often.The door gasket has objects that do not allow to close it completely.The freezer receives direct sunlight or is close to a heat source.The freezer is not well ventilated.The selected temperature is too high.	Introduce food in the freezer when it is at room temperature.Check and close the door.Remove the freezer from the heat source.Keep the recommended distances in the installation section so the freezer is well ventilated.Set a suitable temperature.
Undesired odours in the freezer.	There is spoiled food inside.The freezer is dirty.Food with a strong odour stored inside the refrigerator.	Dispose of food which is spoiled.Clean the freezer.Pack food, especially if it has a strong smell.

Note:

If none of these situations match your problem, do not attempt to disassemble or repair the freezer yourself. Repairs carried out by unqualified people may result in injury or serious malfunctions. Please contact the place where you bought the appliance or the official

ENGLISH

Cecotec Technical Support Service. Repairs must be carried out by an authorised technician using only original spare parts.

Some of these instructions are intended for qualified technicians; do not attempt to carry them out if you do not have the necessary training and knowledge, as any damage caused by incorrect repair voids the warranty.

Unauthorised self-maintenance or maintenance will affect the safe use of the product and the application of the warranty policy.

NOTE:

• Certain sounds during normal operation are expected and do not affect proper operation.

• Avoidable sounds:

• Noise from unlevelled appliance: adjust position using front adjustable feet (not available on all models).

• Noise from contact with adjacent furniture or cabinet: move appliance away.
  ○ Creaking from drawers or shelves: remove and reinsert.
  ○ Clinking container sounds: separate them.

• Normal operating sounds are primarily due to compressor operation (start-up) and the cooling system (thermal expansion and contraction caused by refrigerant flow).

• When operating the appliance for the first time, the compressor noise may seem louder. When the internal temperature drops below a certain level, the noise will decrease.
• When starting or stopping compressor operation, when various parts expand or contract, when various control devices operate, or when the temperature changes inside the appliance, normal sounds will be heard.
• During operation, the compressor's external temperature exceeds 80°C. Do not touch it, as this could cause serious injury.

• If room temperature is too high, compressor start-up time may be extended. This is a normal phenomenon.

• Technical specifications

Product	Bolero CoolMarket UF 206 Dual Inox D	Bolero CoolMarket UF 206 Dual White E
Reference	EU01_122371	EU01_122372
QR code
Rated voltage	220-240 V~	220-240 V~
Rated frequency	50 Hz	50 Hz
Rated current	2.0 A	2.0 A
Climate class*	N / ST	N / ST
Total capacity	206 L	206 L
Refrigerant	R600a / 36 (g)	R600a / 36 (g)
Energy efficiency class**	D	E
Insulator	Cyclopentane	Cyclopentane

(*) Freezer intended for use at room temperatures between 16 °C and 38 °C.
(**) Energy Efficiency Class ranging from "A" (most efficient) to "G" (least efficient).

Information related to energy efficiency can be found in the European Commission's public database EPREL:

1. Open the EPREL database homepage

https://eprel.ec.europa.eu/screen/product/refrigeratingappliances2019

1. Search by model reference.

You can find more information on this model and access its database by scanning the QR code (also found on the energy label).

IMPORTANT: Technical specifications may change without prior notice to improve product quality.

IMPORTANT: The values stated have been obtained in a laboratory environment in accordance with the relevant regulations. These values may vary depending on the environmental conditions and use of the refrigerator.

ATTENTION: These data is subject to regulatory changes.

Made in China | Designed in Spain

9. Disposal of old electrical and electronic appliances

This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its service life, you must remove the batteries/accumulators and take it to a collection point designated by local authorities.

For detailed information on how to properly dispose of electrical and electronic equipment and/or the corresponding batteries, consumers should contact their local authorities.

Compliance with the above guidelines will help to protect the environment.

10. Technical support and warranty

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of product delivery under the terms, conditions and deadlines established by applicable regulations.

Repairs should be carried out by qualified personnel.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at [phone].

11. Copyright

The intellectual property rights over the texts in this manual belong to CECOTEC

INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording, or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

12. Simplified Declaration of Conformity

Cecotec Innovaciones hereby declares that this appliance complies with the essential requirements and other relevant provisions of the regulations applicable in the European Union. This appliance has been designed, manufactured and tested in compliance with required safety and quality standards. The full text of the EU Declaration of Conformity can be found on the following website:

https://cecotec.es/es/information/declaration-of-conformity

FRANÇAIS

https://storececotec.it/it/information/declaration-of-conformity

PORTUGUÊS

https://cecotec.es/es/information/declaration-of-conformity

POLSKI

https://cecotec.es/es/information/declaration-of-conformity

ČEŠTINA

https://cecotec.es/es/information/declaration-of-conformity

ΕΛΛΗΝΙΚΑ

ΕΛΛΗΝΙΚΑ

https://cecotec.es/es/information/declaration-of-conformity

1 الشكل

*LED ضوء .1