Blendgo Pack - Washing machine CECOTEC - Free user manual and instructions

USER MANUAL Blendgo Pack CECOTEC

1. Parts and components 14
2. Before use 15
3. Operation 15
4. Cleaning and maintenance 20
5. Troubleshooting 21
6. Copyright 21
7. Simplified EU Declaration of Conformity 22

SOMMAIRE

EU01_107590_BlendGo Pack

EN • The coding in this manual is generic and applies to all code variants of the appliance.

1. Removable battery
2. Speed control button
3. Motor unit
4. Attachment coupling
5. Blending arm
6. Whisk adapter
7. Whisks
8. Chopper bowl (500 ml with lid)
9. Measuring jug (700 ml with lid)
10. Power unlock button
11. Battery charging port

Fig. 2

Jug blender

1. Jug
2. Blade assembly
3. Blender base
4. Removable battery
5. Jug lid
6. Operating buttons

Fig. 3

Hand mixer

1. Main body
2. Removable battery
3. Right beating whisk
4. Left beating whisk
5. Right dough hook
6. Left dough hook
7. Release button
8. Operating buttons

NOTE:

The graphics in this manual are schematic representations and may not exactly match the product.

2. BEFORE USE

• This appliance comes in a packaging designed to protect it during transport. Take the appliance out of its box and remove all packaging materials. You can keep the original box and other packaging materials in a safe place to prevent damage to the appliance if you need to transport it in the future. If you wish to dispose of the original packaging, make sure all items are recycled properly.
• Check that all parts and components are included and in good condition. If any of them are missing or damaged, please contact Cecotec's Official Technical Support Service immediately.

Box content

• Hand blender
• Whisks
• Chopper bowl
• Measuring jug
• Hand mixer
• Beating whisks
• Dough hooks
• Jug blender
• Lid
• Type-C charging cable
• Battery
• Instruction manual

- Do not remove the product's serial number in order to keep proper traceability if technical assistance is required.

1. Remove all packaging materials, if any.
2. Clean all parts and accessories as indicated in the "Cleaning and maintenance" section.
3. Charge the battery until the battery status indicator light illuminates solid white.

3. OPERATION

Charging the battery

1. Remove the magnetic suction battery from the motor body. Fig. 4
2. Insert the Type-C charging cable into the battery charging port. Fig. 5.
3. Use a suitable Type-C charger for charging.
4. The charge status lights will flash during charging. Once charging is complete, all five lights will remain illuminated.

Battery status

Battery status	Battery %	Meaning
1 white light	Less than 20%
2 white lights	21%-40%
3 white lights	41%-60%
4 white lights	61%-80%
5 white lights	81%-100%
Blue light		High motor temperature
Red light		Battery protection function activated

USING THE HAND BLENDER

IMPORTANT: Make that the speed control button is not pressed before attaching or removing parts or accessories on the hand blender.

To start blending:

1. Insert the cordless hand blender into the mixture.
2. Press the speed control button and the power unlock button simultaneously to start.
3. Use your free hand to cover the top of the blending jug for greater stability and to prevent splashing.

NOTE: Do not immerse the motor body in liquids or other mixtures.

1. Use an upward motion with the hand blender to move ingredients within the jug.
2. Slowly slide it upwards against the side of the jug.
3. Repeat the process until the ingredients reach the desired consistency.

Note: If the motor becomes too hot, the blue temperature LED indicator will alert you, protecting the appliance and extending its service life.

Using the chopper bowl

Use it to cut and chop beef, onion, garlic, cheese, carrots, nuts, etc.

WARNING: Cutting hazard. Handle the blades with care. Failure to do so may result in cuts.

1. Insert the chopping blade into the chopper bowl. Fig. 6.
2. Add the ingredients to the bowl.

Note: For best results, cut food into 3/4" (2 cm) pieces.

1. Align the chopper attachment with the motor body and press them together.

Note: Do not twist the motor body to fit it. Fig. 7

1. Press the speed control button and the power unlock button simultaneously to start. Fig. 8
2. For best results, use the "PULSE" function by pressing and releasing the speed control button until the ingredients reach the desired consistency.
3. When you have finished chopping, release the speed control button.

Using the whisks

Use the whisks to whip cream, beat egg whites, mix instant puddings, vinaigrettes, mousse or to make mayonnaise.

1. Insert the whisks into the whisk/milk frother adapter until they click into place. Fig. 9
2. Then, insert the whisk attachment into the motor body and twist it to lock until you hear a click. Fig. 10
3. Insert the cordless hand blender into the mixture.
4. Press the speed control button and the power unlock button simultaneously to start.
5. Once you have finished whisking, release the speed control button and then remove the blender from the mixture.

NOTE: Do not immerse the motor body in liquids or other mixtures.

TIP: The stainless steel whisks can scratch or mark non-stick coatings. Avoid using the whisks with non-stick cookware.

Using the milk frother

1. Insert the milk frother into the whisk/milk frother adapter until it clicks into place. Fig. 11
2. Insert the milk frother attachment into the motor body and twist it to lock until you hear a click. Fig. 12
3. Insert the cordless hand blender into the mixture. Press the speed control button and the power unlock button simultaneously to start.

NOTE: Do not immerse the motor body in liquids or other mixtures.

1. Install the removable battery into the connection located at the rear of the blender base, in the area where the operating buttons are situated.
2. Before operating the appliance, fill the jug properly with the desired ingredients.
3. Press and hold the "P" button to operate, release to stop.

Note: The "P" button activates the Pulse function. This function allows precise manual control over processing. Hold down the "P" button to operate the blender; the blender will stop immediately when the button is released.

1. Press the power button Ⓑ for automatic operation for 1 minute. If you press the power button Ⓑ during operation, the appliance will stop.

Note: Before use, you can press the battery level indicator button located on the back of the battery to check its charging status.

Fig. 13 key:

1. PULSE button
2. Power button
3. Battery level button
4. Battery level indicator light

Battery installation

Fig. 14

The battery features an automatic magnetic locking function, allowing easy installation directly onto the rear of the main unit. To remove the battery, simply pull it away.

Note: Pay attention to the correct orientation (top and bottom), otherwise installation will not be possible.

Using the blade assembly

1. Install the blade assembly into the jug and tighten it by turning clockwise. Fig. 15
2. To remove the blade assembly, loosen it by turning anticlockwise. Fig. 16

Note: The maximum food capacity in the jug must not exceed the limit line.

Warning: The blades are sharp; handle them with care to avoid cuts.

Jug installation

1. Install the jug with the blade assembly onto the main unit and tighten it by turning clockwise until you hear a click. Fig. 17

2. To remove the jug, loosen it by turning anticlockwise. Fig. 18

NOTE: Pay attention to the alignment mark on the main unit when installing the jug.

Using the jug lid

1. Install the lid onto the jug and tighten it by turning clockwise. Fig. 19
2. To remove the lid, loosen it by turning anticlockwise. Fig. 20
3. To drink the juice, push up and open the small top sealing cap. Fig. 21
4. For convenience when going out and carrying it, the handle can be opened for use.

NOTE: Due to the lack of a safety lock on the small top sealing cap and to prevent liquid spillage, carrying in a bag is not recommended.

1. The battery is installed in the appliance. When switched on, the display shows "0". Note: After 10 seconds of inactivity, the appliance will switch off.

2. When the appliance is not operating, press the "+" and "-" buttons to select the desired speed. The motor will not start until you press the central Start/Stop button ▷. Once in operation, you can adjust the speed by pressing the "+" and "-" buttons. The appliance will change to the newly selected speed. To stop the appliance, set the speed to 0.

3. During operation, press the Start/Stop button ▷ to pause the appliance. The display will show the current speed. After 10 seconds of inactivity, the lights will turn off and the appliance will enter standby mode. To exit standby mode, press any button; the appliance will return to the previous speed. Press the central Start/Stop button ▷ to resume operation.
4. Press and hold the "+" and "-" buttons to quickly adjust the speed without having to cycle through all intermediate speeds.
5. Disconnect the battery to reset the speed to zero.

Fig. 23 key:

1. Release button
2. Display
3. Start/Stop button

Battery installation

Fig. 24

ENGLISH

The battery features an automatic magnetic connection system that allows easy installation by simply bringing it close to the rear of the main body. To remove the battery, simply pull it away.

Pay attention to the correct orientation (top and bottom), otherwise installation will not be possible.

Before use, you can press the battery level indicator button located on the back of the battery to check its charging status.

Fig. 24 key:

1. Battery power button
2. Battery level indicator light

Using the beating whisks

1. Insert the beating whisk upwards into the appliance until you hear a click. Fig. 25
2. To remove the beating whisk, press the release button downwards to release it. Fig. 26
3. Pay attention to distinguish between the left and right beating whisks (the left one has notches), otherwise correct installation will not be possible.

NOTE: Do not immerse the motor body in liquids or other mixtures.

Using the dough hooks

1. Insert the dough hook upwards into the appliance until you hear a click. Fig. 27
2. To remove the dough hook, press the release button downwards to release it. Fig. 28
3. Pay attention to distinguish between the left and right dough hooks (the left one has notches), otherwise correct installation will not be possible.

NOTE: Do not immerse the motor body in liquids or other mixtures.

4. CLEANING AND MAINTENANCE

IMPORTANT: Make that the speed control button is not pressed before attaching or removing parts or accessories.

WARNING: Cutting hazard. Handle the blades with care. Failure to do so may result in cuts.

ENGLISH

1. Remove the blending arm, whisk and milk frother attachment before cleaning.
2. The following parts are dishwasher safe (top rack only): Whisks, chopper bowl, chopping blade, blending jug and lid.
3. Wash the blending arm, chopper attachment and whisk adapter in hot, soapy water.
4. Clean the motor body with a damp cloth. Mild washing-up liquid may be used, but do not use abrasive cleaners.

5. TROUBLESHOOTING

Problem	Possible cause	Possible solution
The cordless hand blender does not start.	Low battery, incorrectly installed battery or connection issue.	Check the battery level status to see if it is correctly installed. Check if the battery lights illuminate blue and red.
The blue light on the removable battery is illuminated.	Motor temperature too high.	Cool down the main unit until the blue light turns off.
The red light on the removable battery is illuminated.	Battery protection activated (possibly due to overheating or need for reactivation/ charging).	1. If the battery surface is overheating, allow it to cool down.2. Connect the charger to activate the battery.

6. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The content of this publication may not, either in part or in its entirety, be reproduced, stored in a retrieval system, transmitted or distributed by any means (electronic, mechanical, photocopying, recording or similar) without prior authorisation from CECOTEC INNOVACIONES, S.L.

7. SIMPLIFIED EU DECLARATION OF CONFORMITY

CE Cecotec Innovaciones hereby declares that this product complies with the essential requirements and other relevant provisions of the regulations applicable in the European Union. This product has been designed, manufactured and tested in compliance with the required safety and quality standards. The full text of the EU Declaration of Conformity can be found on the following website: https://cecotec.es/es/information/declaration-of-conformity

1. PIÈCES ET COMPOSANTS

Image 1

Mixeur plongeant

declaration-of-conformity

www.cecotec.es