Air Drybold - Washing machine CECOTEC - Free user manual and instructions

Product type	Hot air brush
Brand	Cecotec
Model	Air Drybold
Recommended use	Drying and straightening hair
Power	1200 W
Power supply	Mains, 220-240 V~ / 50-60 Hz
Cold air function	Yes
Hot air function	Yes, with heating plates
Heating plates	With ceramic coating
Indicator light	Indicates activation of the heating plates
Operating modes	Cold air, hot air, plate only
Cool tip	Yes, for user comfort
Brush bristles	Integrated to detangle hair
Air inlet grille	Do not obstruct to avoid overheating
Power cord	Standard length, do not wrap around the device
Safety	Do not use near water, do not immerse
Maintenance	Clean with a soft damp cloth, without abrasive products
Cleaning the air inlet	Use a soft brush or a cotton swab
Box contents	Hot air brush, instruction manual
Warranty	Official Cecotec after-sales service
Repairability	Do not repair yourself, contact the authorized after-sales service

Frequently Asked Questions - Air Drybold CECOTEC

How to turn on the Air Drybold hot air brush?

Unroll the power cord and plug it into an electrical outlet, then turn on the brush by turning the mode selector. Check that the mains voltage matches the one indicated on the label.

What are the different operating modes available?

The device has three modes: cold air, hot air (heating plates activated) and plate only mode. The indicator light turns on when the heating plates are activated.

Can the brush be used on wet hair?

Yes. Wash and towel-dry your hair to remove excess moisture, then divide it into sections. It is recommended to dry the roots with a hair dryer before using the brush.

How to clean the hot air brush?

Before cleaning, unplug the device. Remove hair or dirt stuck between the bristles with a comb or a small brush, then wipe the ceramic body and bristles with a slightly damp soft cloth. Do not use abrasive products.

What to do if the motor does not work correctly?

Check that the device is properly plugged in, that the selector is not in the off position, and that the outlet works. If the problem persists, contact the authorized technical service.

What to do if hot air does not come out?

Make sure the selector is not set to cold air. Turn off the device, unplug it, and let it cool down. Then check that nothing is blocking the air inlet.

Can the device be used in a bathroom?

No, the device must not be used near bathtubs, showers, sinks, or other containers holding water. It is imperative to unplug it after use due to the risk related to water.

How to turn off the device?

When you are finished, set the mode selector to the off position, turn off the device, and unplug it from the power outlet.

What to do if the heating plate does not heat up?

Check that the selector is not set to cold air. If the problem persists, contact the official Cecotec after-sales service.

How to store the device?

Store the brush in a dry place, away from dust. Avoid wrapping the power cord around the brush so as not to damage it.

USER MANUAL Air Drybold CECOTEC

Safety instructions 7

1. Parts and components 41

2. Before use 41

3. Operation 41

4. Cleaning and maintenance 42

5. Troubleshooting 43

6. Technical specifications 43

7. Disposal of old electrical and electronic appliances 44

8. Technical support and warranty 44

9. Copyright 44

10. Declaration of conformity 44

SOMMAIRE

EU01_109099_Air DryBold

EN • The coding in this manual is generic and applies to all code variants of the appliance.

Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users.

• All safety instructions must be closely followed when using the appliance.
• Ensure that the mains voltage matches the voltage specified on the product rating label and that the plug is earthed.
• This appliance is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.
• If the device is to be used in a bathroom, it must be unplugged from the wall socket after use, as the proximity to water could be a risk even with the device switched off.
• As additional protection, it is recommended that a Residual Current Device (RCD) having a rated operating fault current not exceeding 30 mA be installed in the electrical circuit supplying the bathroom. We recommend you ask a qualified installer for advice.
• This appliance can be used by children aged 8 years and above and people with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by unsupervised children.
• This symbol means that the appliance must not be used near bathtubs, showers, sinks or other containers filled with water.
• Do not immerse the cable, plug, or any other non-removable part of the appliance in water or any other liquid or expose

electrical connections to water. Make sure your hands are dry before handling the plug or switching on the appliance.

This symbol means "caution, hot surface."

- Check the power cable regularly for visible

damage. If the cable is damaged, it must be replaced by the official Cecotec Technical Support Service to avoid any danger.

• Ensure that the air inlets and outlets are not blocked.
• Turn off and unplug the appliance from the power supply immediately after use.

• Immediately unplug the appliance from the socket in these cases:

• Abnormal operation.

• Cleaning.

• After use.

• Do not insert metal objects through the air inlets to avoid electric shocks.

• Do not wind the cable around the device.
• Keep your face, neck, and scalp away from the device.
• Do not leave the appliance on any surface while in operation.
• Do not use the device to comb wigs, natural hair extensions, fake hair, or animal hair.
• The air inlet ensures good ventilation of the appliance. Do not cover or obstruct it, as this may cause overheating.
• Do not insert objects in the air inlet.

INSTRUCTIONS DE SÉCURITÉ

1. Cool tip
2. Bristles
3. Ceramic coating
4. Heating plates
5. Indicator light
6. Mode knob
7. Air inlet grille
8. Power cord

NOTE:

The graphics in this manual are schematic representations and may not exactly match the product.

2. BEFORE USE

• This appliance is packaged in a way as to protect it during transport. Take the appliance out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place to prevent damage to the appliance if you need to transport it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.
• Do not remove the serial number of the appliance in order to keep a correct traceability of it in case of assistance.

Box content

• Air brush
• Instruction manual

3. OPERATION

Switching on the brush

1. Unwind the power cord and plug it into a power socket. Then switch on the brush by turning the mode knob.
2. If you select the ⏻ mode, the brush will blow out cold air.

ENGLISH

1. If you select the ⚪ mode, the heating plates will be activated, and the brush will blow out hot air.
2. If you select the mode, the heating plates will be activated (in this case the brush will not blow out hot air).

Note: The indicator light will come on when the heating plates are activated.

Charging the brush

When you have finished using the brush, turn the mode knob to the off position.

Operation

Hair drying tips

1. Shampoo and towel dry your hair to remove excess moisture and divide it into different sections.
2. Blow dry the roots with a hair dryer before using the brush.
3. Plug the brush into a power socket and select the air + heating plate mode.
4. Take a strand of hair and run the air part of the brush from the roots to the ends, always directing the air towards the hair, not the scalp.
5. To avoid over-drying, do not concentrate heat on a single section of hair for too long. Move the brush while in use.
6. When the hair is dry, pass the heating plate part over the hair to straighten it.
7. When finished, select the airless heating plate mode for a more polished result.

WARNING: Keep the air inlet grille of the brush clean and free of obstructions.

4. CLEANING AND MAINTENANCE

Note: Before carrying out any of the following tasks, make sure that the brush is unplugged from the mains.

1. Remove any hair residue or dirt trapped between the bristles using a comb or small brush.
2. Gently wipe the ceramic barrel and bristles with a soft, slightly damp cloth. Do not use chemicals or harsh cleaning products that may damage the ceramic surface.
3. Use a soft, damp cloth to clean the surface of the appliance. Use a soft brush or a cotton swab to clean the air inlet.
4. Do not immerse the appliance in water or other liquids.
5. Do not use abrasive cleaners or scouring pads to clean the appliance.
6. Do not twist, bend, pull, or damage the power cord.
7. Clean the dirt and hairs that may be clogging the device.

Storage

• Store the brush in a dry place protected from dust.
• Avoid wrapping the power cord around the brush, as this may damage the appliance.

5. TROUBLESHOOTING

Problem	Possible causes
The brush does not work properly.	Check if it is correctly plugged in.Make sure that the mode knob is not in the off position.Check the plug or power socket.
Hot air does not come out.	Make sure that the mode knob is not in the cold air position.Turn the mode knob to the off position, unplug the appliance from the mains and allow it to cool down properly.Before turning it back on, make sure that nothing is clogging the air inlet.
Air does not come out.	Make sure that the mode knob is not in the heating plate position.
The heating plate does not heat.	Make sure that the mode knob is not in the cold air position.

WARNING:

Do not try to repair the appliance on your own. If the problem persists after performing the checks described above, please contact authorised personnel, the shop where you purchased the appliance or the official Cecotec Customer Service.

6. TECHNICAL SPECIFICATIONS

Product reference: EU01_109099

Product: Air DryBold

Power: 1200 W

Voltage: 220-240 V\~

Frequency: 50/60 Hz

Technical specifications may change without prior notification to improve product quality. Made in China | Designed in Spain

7. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the appliance and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities.

For detailed information on how to properly dispose of electrical and electronic appliances and/or batteries, consumers should contact their local authorities.

Compliance with the above guidelines will help protecting the environment.

8. TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions and deadlines established by the applicable regulations.

Repairs should be carried out by qualified personnel.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at [phone].

9. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

10. DECLARATION OF CONFORMITY

CE Cecotec Innovaciones hereby declares that this appliance complies with the essential requirements and other relevant provisions of the regulations applicable in the European Union. This appliance has been designed, manufactured and tested to meet the required safety and quality standards. The full text of the EU Declaration of Conformity can be found on the following website: https://cecotec.es/es/information/declaration-of-conformity

1. PIÈCES ET COMPOSANTS

Image 1

5. PROBLEEMOPLOSSING

Product: Air DryBold

Vermogen: 1200 W

Voltage: 220-240 V\~

Frequentie: 50/60 Hz

يَلَاتِل: https://cecotec.es/es/information/declaration-of-conformity

Fig./Img./Abb./Afb./ Rys. 1

www.cecotec.es