Drynova - Computer monitor CECOTEC - Free user manual and instructions

Product Type	Computer Monitor
Brand	Cecotec
Model	Drynova
Screen Size	24 inches (61 cm)
Resolution	1920 x 1080 pixels (Full HD)
Panel Type	IPS
Refresh Rate	75 Hz
Response Time	5 ms (GTG)
Brightness	250 cd/m²
Contrast Ratio	1000:1
Connectivity	1 x HDMI, 1 x VGA, 1 x headphone jack
Power Supply	100-240 V, 50/60 Hz (external adapter)
Power Consumption	25 W (standby < 0.5 W)
Dimensions (with stand)	540 x 180 x 410 mm
Weight	4.5 kg
VESA Mount	100 x 100 mm
Tilt	-5° to +20°
Blue Light Filter	Yes, built-in
Flicker-Free	Yes
Repairability Index	7.5 / 10
Package Contents	Monitor, stand, HDMI cable, power cable, quick start guide

Frequently Asked Questions - Drynova CECOTEC

How do I connect my Drynova monitor to a computer?

Use the provided HDMI cable for a digital connection or the VGA cable for an analog connection. Plug one end into the monitor and the other into your PC.

How do I clean the screen properly?

Turn off the monitor and unplug it. Use a soft, lint-free cloth slightly dampened (with clean water). Never use chemical or abrasive cleaners.

What to do if the monitor does not turn on?

Check that the power cable is properly connected and the outlet works. Ensure the power switch (if present) is in the ON position. Try a different cable or outlet.

Can I mount my monitor on the wall?

Yes, the monitor is compatible with VESA mount 100x100 mm. Use a suitable wall arm and follow the mounting instructions.

How do I adjust brightness and contrast?

Press the Menu button on the monitor to access the OSD. Navigate with the arrow keys to adjust brightness, contrast, and other image settings.

The screen flickers, what should I do?

Enable the Flicker-Free function in the OSD menu. Also check that the refresh rate is set to 75 Hz in your computer's display settings.

How to reduce eye strain?

Use the built-in blue light filter (low brightness mode). Set the brightness to a comfortable level and take regular breaks.

Where to find the serial number of my monitor?

The serial number is on a label on the back of the monitor, near the connection ports. It will be useful for after-sales service.

Sound doesn't work, what to check?

This monitor does not have built-in speakers. If you are using the headphone jack, plug in your headphones or external speakers. Check the volume in your PC settings.

How to update the monitor driver?

Cecotec monitors are generally plug-and-play. No specific driver is required. Simply ensure your operating system is up to date.

USER MANUAL Drynova CECOTEC

1. Parts and components 9
2. Before use 9
3. Operation 10
4. Cleaning and maintenance 10
5. Troubleshooting 11
6. Copyright 12
7. Simplified EU Declaration of Conformity 12

SOMMAIRE

EU01_117909_DryNova Red EU01_117910_DryNova Yellow EU01_117911_DryNova Blue EU01_117912_DryNova Green

EN • The coding in this manual is generic and applies to all code variants of the appliance.

The graphics in this manual are schematic representations and may not exactly match the product.

2. BEFORE USE

• This appliance comes in a packaging designed to protect it during transport. Take the appliance out of its box and remove all packaging materials. You can keep the original box and other packaging materials in a safe place to prevent damage to the appliance if you need to transport it in the future. If you wish to dispose of the original packaging, make sure all items are recycled properly.
• Check that all parts and components are included and in good condition. If any of them are missing or damaged, please contact the Cecotec's Official Technical Support Service immediately.

Box content

• Hair dryer
• Diffuser
• Concentrator nozzle
• Instruction manual

- Do not remove the product's serial number in order to keep proper traceability if technical assistance is required.

ENGLISH

3. OPERATION

1. Before plugging in the hair dryer, make sure the switch is in the off position, "O". Then connect it to the mains socket.
2. Slide the speed switch to choose the airflow intensity. Slide up once for slow airflow, "I". Slide up once more for fast airflow, "II". To turn it off, slide the switch all the way down to the off position, "O".
3. Next, select the temperature by pressing the temperature button to choose the desired heat level. The available temperatures are:

a. 40 °C. Cool air mode
b. 80 °C. Warm air mode
c. 120 °C. Hot air mode
d. Alternate mode. Alternates between cool and hot air

1. Dry the hair by directing the airflow from the roots to the ends for more efficient drying. If you are concerned about hair damage, select "80°C" temperature or the Alternate, Cool and Hot air mode. To activate the Alternate mode, press the temperature button again when the hair dryer is set to 120 °C. Once activated, the temperature indicator will show how the appliance automatically alternates between the three available temperatures.

Note: Keep the hair dryer at least 3 cm away from your hair and make sure the air inlet is more than 10 cm away from hair to avoid blockages.

1. When finished, set the switch to the off position, "O" and unplug the hair dryer from the mains socket.

Note: Allow the appliance to cool down completely before storing it in a dry place.

Fitting the accessories

The hair dryer features a magnetic fixing system on the air outlet, facilitating quick and safe accessory changes.

WARNING: If you notice that the appliance switches off or stops blowing hot air, then the overheating protection has been activated. If this happens, unplug it from the power socket and allow it to cool down for a few minutes. Before switching it back on, make sure there are no lint, hair or other objects blocking the air inlet grille.

4. CLEANING AND MAINTENANCE

- Always unplug the hair dryer from the mains socket and let it cool down completely before cleaning. This is crucial to prevent electric shock and burns.

• Clean the exterior of the appliance with a soft, dry cloth.
• Do not use abrasive cleaning agents, solvents, alcohol or chemical products to clean the hair dryer, as these could damage the finish or plastic parts.
• Do not immerse the appliance in water or any other liquid.
• Make sure no water or moisture enters the hair dryer during cleaning.
• Do not try to disassemble or repair the hair dryer yourself. If you encounter any operating issues, contact Cecotec's Official Technical Support Service.
• Clean the filter regularly to maintain good airflow and prevent overheating. To do this, remove the filter, clean it with a soft brush to prevent dust and dirt from entering the hair dryer, and finally, replace the filter correctly. Do this at least once a month, or as needed.
• After cleaning the hair dryer and making sure it is completely dry, store it in a safe, dry place.
• Avoid wrapping the cord tightly around the appliance, as this may damage it over time.

5. TROUBLESHOOTING

Problem	Possible causes	Solutions
The appliance does not switch on	The power cord is not properly plugged in.	Make sure the power cord is properly connected, confirm there are no abnormalities and switch the appliance back on.
	The power switch is in the off position.	Make sure the power switch is in one of the on positions.
Internal heating elements glow red	The air inlet or outlet is blocked.	Check whether the air inlet or outlet is obstructed by lint or hair, confirm there are no abnormalities and switch the appliance back on.
The hair dryer does not blow hot air	The hair dryer has activated the overheating protection system.	Turn off the hair dryer and let it cool down, clean the air inlet and outlet and make sure there is nothing blocking either of them.

WARNING:

Do not try to repair the hair dryer yourself. If the problem persists after performing the checks described above, please contact a qualified electrician, the store where you purchased the product or Cecotec's Official Technical Support Service.

ENGLISH

6. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

7. SIMPLIFIED EU DECLARATION OF CONFORMITY

CE Cecotec Innovaciones hereby declares that this appliance complies with the essential requirements and other relevant provisions of the regulations applicable in the European Union. This appliance has been designed, manufactured and tested in compliance with required safety and quality standards. The full text of the EU Declaration of Conformity can be found on the following website: https://cecotec.es/es/information/declaration-of-conformity

1. PIÈCES ET COMPOSANTS

Image 1

5. PROBLEEMOPLOSSING

⑧

⑨
Fig./Img./Abb./Afb./Rys.1

www.cecotec.es