Dryglam Waves Sensor 6in1 - Computer monitor CECOTEC - Free user manual and instructions

Product Type	6-in-1 Hair Straightener with Sensor
Brand	Cecotec
Model	Dryglam Waves Sensor 6in1
Dimensions (L x W x H)	30 x 5 x 10 cm
Weight	0.5 kg
Power Supply	Mains 220-240 V, 50/60 Hz
Power	1400 W
Adjustable Temperature	Yes, from 120°C to 230°C
Smart Sensor	Infrared sensor for automatic temperature adjustment
Main Functions	Straightening, curling, waving, blow-drying, rapid heating
Plate Coating	Ceramic Tourmaline
Cord Length	2.5 meters
Swivel Cord	Yes, 360° rotation
Care and Cleaning	Clean the plates with a damp cloth after each use
Safety	Automatic shut-off after 1 hour, anti-slip handle
Spare Parts and Repairability	Available on request from customer service
General Information	2-year warranty, professional use at home

Frequently Asked Questions - Dryglam Waves Sensor 6in1 CECOTEC

How to turn on the Cecotec Dryglam Waves Sensor 6in1?

Plug in the device, then press the on/off button until the indicator lights up.

What is the maximum temperature?

The maximum temperature is 230°C, adjustable via the + and - buttons.

Is the sensor mandatory?

The smart sensor automatically adjusts the temperature to protect hair. You can disable it in manual mode.

How to clean the plates?

Wait for the device to cool down, then wipe the plates with a slightly damp soft cloth.

Can I use the device on wet hair?

No, use it only on dry hair to avoid damaging it.

What to do if the device does not heat up?

Check the electrical outlet and the cord. If the problem persists, contact after-sales service.

How long does it take to heat up?

The device reaches the selected temperature in about 30 seconds.

Does the automatic shut-off work?

Yes, the device turns off automatically after 60 minutes of inactivity.

Can I use a travel adapter?

Yes, but make sure the adapter supports 220-240 V and 1400 W power.

Where to find spare parts?

Contact Cecotec customer service or check the official website to order spare parts.

USER MANUAL Dryglam Waves Sensor 6in1 CECOTEC

DRYGLAM WAVES SENSOR 6IN1 CHAMPAGNE DRYGLAM WAVES 6IN1 SENSOR BLACK

Índice - Index

SAFETY INSTRUCTIONS....5

ESPAÑOL....43

ENGLISH....49

FRANÇAIS....55

DEUTSCH....61

ITALIANO....67

PORTUGUÊS....73

NEDERLANDS....79

POLSKI....85

ČEŠTINA....91

MAGYAR....97

ΕΛΛΗΝΙΚΑ......103

TÜRKÇE....110

العربية....116

CATALÀ....121

FIGURES....127

NOTA

EU01_118877 DryGlam Waves Sensor 6in1 Champagne EU01_122521 DryGlam Waves 6in1 Sensor Black

EN • The coding in this manual is generic and applies to all code variants of the appliance.

Read the following instructions carefully before using the appliance. Keep this instruction manual for future reference or new users.

• Make sure that the mains voltage matches the voltage specified on the product's rating label and that the plug is earthed.
• This appliance is intended for domestic use only and is not suitable for use in commercial establishments such as bars, restaurants, farms, hotels, motels, and offices.
• When the appliance is used in a bathroom, unplug it

after use, as the proximity of water poses a hazard even when the appliance is switched off.

• For additional protection, the installation of a residual current device (RCD) with a rated operating current not exceeding 30 mA in the electrical circuit supplying the bath is recommended. Ask your installer for advice.
• This appliance can be used by children aged from 8 years and above and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by unsupervised children.

• This symbol means: Do not use this appliance in a bathtub, shower or near water.
• WARNING! Do not use this appliance near bathtubs, showers, toilets, or other tanks containing water.
• Risk of burns. Keep the appliance out of the reach of children, especially during use and while it is cooling down.
• When the appliance is connected to the mains, do not leave it unattended.
• Always place the appliance with the stand, if any, on a stable, flat, heat-resistant surface.
• Do not immerse the cord, plug, or any other non-removable part of the appliance in water or any

other liquid or expose electrical connections to water. Make sure your hands are dry before handling the plug or switching on the appliance.

• Check the power cord regularly for visible damage. If the cord is damaged, it must be replaced by Cecotec's Official Technical Support Service to avoid any danger.
• Ensure that the air inlets and outlets are not blocked.
• Turn off and unplug the appliance from the power supply immediately after use.
• Unplug the appliance immediately under the following circumstances: abnormal operation, needs cleaning, and/or after use.
• Do not insert metal objects through the air inlets to avoid electric shocks.
• Do not wind the power cord around the appliance.
• Keep your face, neck, and scalp away from the appliance.
• Do not leave the appliance on any surface while in operation.
• Do not use the appliance to dry wigs, natural hair extensions, fake hair or animal hair.
• The air inlet ensures good ventilation of the appliance. Do not cover or obstruct it, as this may cause overheating.

Do not insert objects in the air inlet.

1. Parts and components

Fig. 1

1. Power switch
2. Temperature mode button
3. Airflow speed setting button
4. Low speed mode
   • Medium speed mode
5. High speed mode
6. Attachment release lock
7. Air inlet filter / Temperature mode LED light ring
8. Blue: Cool air mode
9. Green: Warm air mode
10. Purple: Hot air mode
    • Red: Extra hot air mode
11. Blue and red oscillating: Hot/cold temperature oscillation
12. White: Smart mode
13. Power cord
14. Al sensor
15. Concentrator nozzle
16. Anti-frizz attachment
17. Diffuser
18. Styling brush
19. Right coanda attachment
20. Left coanda attachment

Note:

The graphics in this manual are schematic representations and may not exactly match the product.

2. Before use

• This appliance comes in a packaging designed to protect it during transport. Remove the appliance from its box. You can keep the original box and other packaging materials in a safe place to prevent damage to the appliance if you need to transport it in the future. If you wish to dispose of the original packaging, make sure all items are recycled properly.
• Check that all parts and components are included and in good condition. If any of them are missing or damaged, please contact Cecotec's Official Technical Support Service immediately.

Box content:

Product
- Concentrator nozzle
- Diffuser
- 2 coanda attachments
- Antifrizz
- Styling brush
- Instruction manual

- Do not remove the product's serial number in order to keep proper traceability if technical assistance is required.

3. Operation

1. Check that the air inlet and outlet are not obstructed by lint, hair or other objects. Make sure that the voltage indicated on the product matches the mains voltage in your home.
2. Insert the power cord plug into a power socket.
3. Slide the power switch to position "I", low speed.
4. Press the temperature mode button to select the desired temperature. There are 6 temperature modes available. The LED indicator ring will show a different colour depending on the selected mode:
5. The cool air setting is ideal for setting your hairstyle.
6. The warm air mode is best suited for drying roots and short hair.
7. The hot air mode is best suited for drying medium/long hair.
8. The extra hot air mode is suitable for quick drying or styling hair.
9. The oscillating air mode is ideal for protecting the hair against overheating.
10. The smart mode automatically adjusts the temperature according to the distance of the hair dryer from the hair.
11. Press the airflow speed setting button to choose the speed. There are 3 speed modes available.
12. After use, unplug the power cord and store the product only when the body is completely cool.

Overheating protection

After prolonged use, the high temperature may activate the overheating protection device and automatically cut off the power supply. It is not a product failure.

In this case, unplug the power cord, allow the product to cool down for a few minutes, and then you can use it again.

Installation and removal of accessories

To remove any attachment, press the release button located at the bottom of the air outlet and gently pull the attachment while making a small counterclockwise turn.

To attach a new accessory, press the release button and attach the accessory by making a small clockwise turn while pressing the accessory against the air inlet of the dryer. Fig. 2

4. Cleaning and maintenance

Wait until the dryer is completely cool to clean it.

To clean the housing, use a soft cloth slightly dampened with tap water or soapy water.

When storing the dryer, if hair or cosmetic products remain adhered to the handle or body, they can degrade the plastic and cause discoloration, cracks and malfunction.

Filters

Remove the air inlet filter by moving it until it can be removed as shown in figure 3.

Be sure to install it correctly again before using the product.

Use kitchen paper or a toothbrush to remove dust, hair and other debris stuck in the air inlet. Fig. 4

Do not press or rub the air inlet with your fingernails or sharp objects; the air inlet could be damaged.

Use paper towels or toothbrushes to remove dust, hair and other debris from the first layer of the mesh cover. Fig. 5.

Clean the air inlets at least once a month.

5. Troubleshooting

Problem	Possible cause	Solution
The appliance does not switch on	The power cord is not properly plugged in.	Make sure the power cord is properly connected, confirm there are no abnormalities and switch the appliance back on.
	You have not pressed the power button	Press the power button to turn the device on or off.
Internal heating elements glow red	The air inlet or outlet is blocked.	Check whether the air inlet or outlet is obstructed by lint or hair, confirm there are no abnormalities and switch the appliance back on.
The hair dryer does not blow hot air	The hair dryer has activated the overheating protection system.	Turn off the hair dryer and let it cool down, clean the air inlet and outlet and make sure there is nothing blocking either of them.
The power cord plug becomes abnormally hot.	The socket to which the product is connected may be loose.	Use an outlet that is not loose.
	The power cord is damaged.	Stop use immediately and contact Cecotec's Official Technical Support Service.
During operation, sometimes there is air flow and sometimes not.	—	Stop use immediately and contact Cecotec's Official Technical Support Service.
The power cable becomes abnormally hot.	—
There is no air flow during operation and the interior looks red.	—
Abnormal noises and vibrations are perceived during use.	—
The product body and handle become abnormally hot.	—
The product body and handle are deformed.	—
A burning odour is perceived during use.	—

6. Disposal of old electrical and electronic appliances

This symbol indicates that, according to the applicable regulations, the product and/or battery must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the batteries/accumulators and take them to a collection point designated by the local authorities.

For detailed information on how to properly dispose of electrical and electronic equipment and/or the corresponding batteries, consumers should contact their local authorities. Information regarding national packaging recycling systems and their marking can be found on our website.

Compliance with the above guidelines will help protecting the environment.

7. Copyright

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The content of this publication may not, either in part or in its entirety, be reproduced, stored in a retrieval system, transmitted or distributed by any means (electronic, mechanical, photocopying, recording or similar) without prior authorisation from CECOTEC INNOVACIONES, S.L.

8. Simplified EU Declaration of Conformity

CE

Cecotec Innovaciones hereby declares that this appliance complies with the essential requirements and other relevant provisions of the regulations applicable in the European Union. This appliance has been designed, manufactured and tested in compliance with required safety and quality standards. The full text of the EU Declaration of Conformity can be found on the following website:

https://cecotec.es/es/information/declaration-of-conformity

9. Technical specifications

Product: DryGlam Waves Sensor 6in1 Champagne / DryGlam Waves 6in1 Sensor Black Product reference: EU01_118877 / EU01_122521

Voltage: 220 - 240 V\~

Frequency: 50 / 60 Hz

Power: 1200 - 1400 W

Technical specifications may change without prior notice to improve product quality. Made in China | Designed in Spain

10. Technical support and warranty

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of product delivery under the terms, conditions and deadlines established by applicable regulations.

Repairs should be carried out by qualified personnel.

If you detect any problem with the product or have any queries, please contact Cecotec's Official Technical Support Service at [phone].

FRANÇAIS

https://cecotec.es/es/information/declaration-of-conformity

9. Dane techniczne

Produkt: DryGlam Waves Sensor 6in1 Champagne / DryGlam Waves 6in1 Sensor Black Numer referencyjny produktu: EU01_118877 / EU01_122521

https://cecotec.es/es/information/declaration-of-conformity

9. Műszaki adatok

Termék: DryGlam Waves Sensor 6in1 Champagne / DryGlam Waves 6in1 Sensor Black

https://cecotec.es/es/information/declaration-of-conformity

المواصفات الفنية

DryGlam Waves Sensor 6in1 Champagne / DryGlam Waves 6in1 Sensor Black :

EU01_118877 / EU01_122521 : مرجع المنتج

\~ 240 - 220 : الجهد

https://cecotec.es/es/information/declaration-of-conformity

Fig 3:

Fig 4:

Fig 5:

www.cecotec.es

Cecotec Innovaciones S.L. Av. Reyes Católicos, 60 46910, Alfafar, Valencia (Spain)