DCS-7342-32C2X - Network switch Planet - Free user manual and instructions
Find the device manual for free DCS-7342-32C2X Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Network Switch |
| Brand | Planet |
| Model | DCS-7342-32C2X |
| Ports | 32 x 100G QSFP28 + 2 x 10G SFP+ Management Ports |
| Switching Capacity | 6.4 Tbps |
| Forwarding Rate | ~1900 Mpps |
| Management | SNMP v1/v2c/v3, Telnet, SSH, HTTP/HTTPS, CLI, Console |
| VLAN Support | IEEE 802.1Q up to 4096 VLANs |
| MAC Address Table | 128K entries |
| Jumbo Frame | Up to 9216 bytes |
| Dimensions (WxDxH) | 440 x 420 x 44 mm (1U) |
| Weight | 8.2 kg |
| Power Consumption | 250W (Max) |
| Input Voltage | AC 100-240V, 50/60Hz |
| Cooling | Built-in fans, front-to-back airflow |
| Operating Temperature | 0°C to 50°C |
| Operating Humidity | 10% to 90% non-condensing |
| Safety Certifications | CE, FCC, RoHS |
| Maintenance | Clean with dry cloth; avoid liquids |
| Spare Parts & Repairability | Power supply and fan modules field-replaceable; contact Planet support |
| General Information | Data center switch for high-density 100G aggregation |
Frequently Asked Questions - DCS-7342-32C2X Planet
How do I factory reset the Planet DCS-7342-32C2X?
Press and hold the reset button on the front panel for 10 seconds while the switch is powered on. The device will reboot with factory default settings.
What is the default IP address and login credentials?
Default IP is 192.168.0.100 with username 'admin' and password 'admin' (or blank). It is recommended to change the password immediately.
Can I use stacking with this switch?
Yes, the DCS-7342-32C2X supports physical stacking via dedicated stacking ports or using QSFP28 ports as stacking links, supporting up to 8 units in a stack.
How to configure VLANs?
Access the web interface under VLAN → 802.1Q VLAN. Create VLANs and assign ports as tagged or untagged. Use show vlan in CLI to verify.
Is PoE supported on this switch?
No, the DCS-7342-32C2X is a non-PoE switch. It does not provide Power over Ethernet on any port.
How do I update the firmware?
Download the latest firmware from Planet's website. Upload the image via TFTP or through the web interface under System → Firmware Upgrade. The switch will reboot after successful upgrade.
What type of cables are compatible with the 100G ports?
The QSFP28 ports support 100GBase-SR4 (MMF), 100GBase-LR4 (SMF), and passive/active DAC cables. Use show interface transceiver to check compatibility.
How to enable SSH access?
In CLI: configure terminal → ip ssh server enable. Ensure an SSH client is allowed in ACL if configured.
What are the LED indicators on the front panel?
Each port has Link/Act and Speed LEDs. System LEDs include PWR, SYS, and Stack ID. Refer to the manual for detailed LED behavior.
How to mount the switch in a rack?
Use the included rack-mount brackets and screws. Ensure proper ventilation: allow 5 cm clearance on sides. Secure the switch to 19-inch rack rails.
User questions about DCS-7342-32C2X Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual DCS-7342-32C2X - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DCS-7342-32C2X by Planet.
USER MANUAL DCS-7342-32C2X Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : DCS-7342-32C2X
Category : Network switch