GS-5220-48PL4XR - Network switch Planet - Free user manual and instructions
Find the device manual for free GS-5220-48PL4XR Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch |
| Brand | Planet |
| Model | GS-5220-48PL4XR |
| Ports | 48 x Gigabit PoE+ (802.3at/af), 4 x 10GbE SFP+ |
| PoE Budget | Max 400W |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 130.95 Mpps |
| Management | L2+/L3, Web, CLI, SNMP, VLAN, QoS, STP, IGMP |
| Dimensions (W x D x H) | 440 x 320 x 44 mm (19-inch, 1U) |
| Weight | 5.5 kg |
| Power Supply | AC 100-240V, 50/60Hz, internal (500W max) |
| Cooling | 2 x internal fans (smart control) |
| Operating Temperature | 0°C to 50°C |
| Humidity | 5% to 95% (non-condensing) |
| Maintenance | Keep vents clean; avoid dust and moisture; use compressed air |
| Safety Precautions | Use grounded outlet; do not cover vents; disconnect power before cleaning |
| Spare Parts / Repairability | Hot-swappable SFP modules; replaceable fans; contact support for other parts |
| Certifications | CE, FCC, RoHS |
Frequently Asked Questions - GS-5220-48PL4XR Planet
What is the PoE budget of the Planet GS-5220-48PL4XR?
The switch provides a maximum PoE budget of 400W, shared across 48 PoE+ ports.
How do I access the web management interface?
Connect to the switch via Ethernet and set your PC IP to the same subnet as the default IP (typically 192.168.0.1). Open a browser and enter the IP address; default login is admin/admin.
Can I use SFP+ modules for 10GbE uplinks?
Yes, the four SFP+ cages support 10GbE SFP+ modules for high-speed uplinks. They are also backward compatible with 1GbE SFP modules.
Does this switch support VLAN configuration?
Yes, it supports 802.1Q VLAN and can create up to 4094 VLAN groups, with port-based and tag-based settings.
How can I reset the switch to factory defaults?
Press and hold the Reset button (located on the front panel) for 10 seconds while the device is powered on. The switch will reboot with factory settings.
What type of power cord does it require?
It uses a standard IEC C13/C14 power cord rated for 10A, suitable for 100-240V AC input.
Is the switch suitable for daisy-chaining via SFP+?
Yes, the SFP+ ports can be used for daisy-chaining or creating rings with protocols like ERPS, providing redundancy.
What is the default IP address for management?
The default management IP is 192.168.0.1 with subnet mask 255.255.255.0. The web login credentials are admin/admin.
Can I monitor the switch via SNMP?
Yes, it supports SNMP v1/v2c/v3 for monitoring and management. MIBs are available in the user manual.
What is the maximum power consumption?
The switch can consume up to 500W when full PoE load is applied. Without PoE, consumption is approximately 50W.
User questions about GS-5220-48PL4XR Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual GS-5220-48PL4XR - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GS-5220-48PL4XR by Planet.
USER MANUAL GS-5220-48PL4XR Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : GS-5220-48PL4XR
Category : Network switch