GS-4210-24UP4C - Network switch Planet - Free user manual and instructions
Find the device manual for free GS-4210-24UP4C Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch |
| Model | GS-4210-24UP4C |
| Brand | Planet |
| Ports | 24 x 10/100/1000BASE-T PoE+ (802.3at), 4 x Gigabit SFP Combo |
| PoE Budget | 370W |
| Switching Capacity | 56 Gbps |
| MAC Address Table | 8K entries |
| VLAN Support | 802.1Q, up to 4K VLANs |
| Management | Web GUI, SNMP v1/v2c/v3, CLI, Telnet, SSH |
| Dimensions (W x D x H) | 440 x 300 x 44 mm (1U) |
| Weight | 4.5 kg |
| Power Supply | Internal, 100-240V AC, 50-60Hz |
| Power Consumption | Max 400W (including PoE) |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% (non-condensing) |
| LED Indicators | Per port: Link/Act, PoE; System: Power, Fault |
| Safety | CE, FCC Class A, RoHS |
| Cleaning | Use a dry cloth; avoid liquids and abrasive cleaners. |
| Repairability | No user-serviceable parts. Contact Planet support for repairs. |
Frequently Asked Questions - GS-4210-24UP4C Planet
What is the PoE budget of the GS-4210-24UP4C?
The GS-4210-24UP4C has a total PoE budget of 370W, supporting IEEE 802.3at PoE+ with up to 30W per port.
Does this switch support VLAN configuration?
Yes, it supports 802.1Q VLAN with up to 4K VLAN groups and can be configured via Web GUI, CLI, or SNMP.
What is the default IP address of the switch?
The default IP address is 192.168.0.100. The default username and password are both admin.
How to reset the switch to factory defaults?
Press and hold the Reset button on the front panel for about 10 seconds until the Power LED blinks. Release to reset.
Can I use the SFP ports for uplink?
Yes, the four SFP combo ports can be used as Gigabit uplinks using fiber or copper SFP modules.
What management options are available?
The switch supports Web GUI, CLI (via Telnet/SSH), and SNMP v1/v2c/v3 for remote management.
How to troubleshoot if a PoE device is not powering on?
Check the PoE budget, ensure the device is within 30W, try a different port, and verify the cable length (<100m). Also check the PoE status in the management interface.
Does the switch support firmware upgrade?
Yes, firmware can be upgraded via TFTP or HTTP through the Web GUI. Download the latest firmware from the Planet website.
What are the dimensions and mounting options?
The switch has a standard 1U rack-mount design (440 x 300 x 44 mm) and includes rack-mount ears for installation.
Is the switch fanless?
No, the GS-4210-24UP4C has built-in fans for cooling. Ensure adequate ventilation around the switch.
User questions about GS-4210-24UP4C Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual GS-4210-24UP4C - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GS-4210-24UP4C by Planet.
USER MANUAL GS-4210-24UP4C Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : GS-4210-24UP4C
Category : Network switch