GS-4210-8UP2S - Network switch Planet - Free user manual and instructions
Find the device manual for free GS-4210-8UP2S Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit PoE+ Switch |
| Ports | 8 x 10/100/1000Base-T PoE+ (802.3at/af), 2 x 1000Base-X SFP (unpopulated) |
| PoE Standard | IEEE 802.3af (15.4W per port) / 802.3at (30W per port) |
| PoE Power Budget | 130W total |
| Switching Capacity | 20 Gbps |
| MAC Address Table | 8K entries |
| Jumbo Frame Support | 9K bytes |
| Management | Web GUI, CLI (Telnet/SSH), SNMP v1/v2c/v3, RMON, LLDP |
| VLAN Features | 802.1Q VLAN (up to 256 groups), Voice VLAN, MAC-based VLAN |
| Quality of Service | 8 priority queues, Strict Priority/WRR, 802.1p, DSCP, bandwidth control |
| Security | 802.1X port-based authentication, ACL (MAC/IP), DHCP snooping, Port security |
| Multicast | IGMP v1/v2/v3 snooping, MLD snooping (Layer 2) |
| Dimensions (W x D x H) | 440 x 200 x 44 mm (19-inch 1U rackmount) |
| Weight | 2.5 kg |
| Power Supply | Internal, AC 100-240V, 50-60Hz |
| Power Consumption | Max 150W (including PoE output) |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% non-condensing |
| Cooling | 2 x built-in fans, airflow direction control |
| Installation | 19-inch rackmount kit included; also supports wall-mount (optional) |
| LED Indicators | System (Power, Status), per port (Link/Act, PoE) |
| Cleaning and Maintenance | Use a dry, soft cloth. Do not apply liquid or spray cleaners. Power off before cleaning. |
| Spare Parts and Repairability | No user-serviceable parts. For repair, contact Planet authorized service center. |
Frequently Asked Questions - GS-4210-8UP2S Planet
How do I reset the GS-4210-8UP2S to factory defaults?
Locate the reset button on the front panel. Press and hold it for about 10 seconds until all LEDs flash. The switch will reboot with factory settings. Alternatively, you can use the CLI command factory reset.
What is the total PoE power budget of this switch?
The switch provides a total PoE power budget of 130W, supporting up to 802.3at PoE+ (30W per port) on all eight copper ports.
Can I use non-PoE devices on the switch?
Yes, the switch auto-detects PoE devices. Non-PoE devices work normally but will not receive power.
How do I configure VLANs on the GS-4210-8UP2S?
Log in to the web GUI or use CLI. Navigate to VLAN > 802.1Q VLAN. Create a VLAN ID, assign tagged/untagged ports, and set the port default VLAN (PVID). For advanced settings, use Voice VLAN or MAC-based VLAN.
What SFP modules are compatible?
The switch accepts standard 1000Base-X SFP modules (e.g., SFP-GE-SX, SFP-GE-LX). For 100Base-FX, use 100M SFP modules. Planet strongly recommends using Planet SFP modules for compatibility, but third-party modules may work.
Is this a managed switch? Can I configure it remotely?
Yes, it is a fully managed Layer 2 switch. You can configure it via SSH, Telnet, Web GUI, or SNMP. Remote management is possible by assigning an IP address and enabling remote access.
How do I update the firmware?
Download the latest firmware from Planet's support page. In the web GUI, go to Maintenance > Firmware Upgrade. Upload the file, confirm, and the switch will reboot. Do not power off during upgrade.
What is the warranty period?
Planet warranty is typically 2 years for this model. Check the included warranty card or contact Planet support for detailed terms.
What do the LED indicators mean?
The power LED is solid green when on. The status LED blinks green during normal operation. Each port has two LEDs: left for link/activity (solid green = link, blinking = activity) and right for PoE (solid amber = PoE active).
Can the switch be mounted on a wall?
Yes, the switch supports wall-mounting using the provided brackets. Alternatively, it can be mounted in a 19-inch rack using the included rackmount kit.
User questions about GS-4210-8UP2S Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual GS-4210-8UP2S - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GS-4210-8UP2S by Planet.
USER MANUAL GS-4210-8UP2S Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : GS-4210-8UP2S
Category : Network switch