SGS-6310-48T6X - Network switch Planet - Free user manual and instructions
Find the device manual for free SGS-6310-48T6X Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Layer 2+ Gigabit Ethernet Switch with 10G Uplinks |
| Ports | 48 x 10/100/1000BASE-T RJ45 + 6 x 10GBASE-X SFP+ |
| Switching Capacity | 216 Gbps |
| Forwarding Rate | 160.7 Mpps |
| MAC Address Table | 32K entries |
| VLAN Support | Up to 4K VLAN IDs |
| Management | Web GUI, CLI (Telnet/SSH), SNMP v1/v2c/v3, RMON |
| Layer 2 Features | STP/RSTP/MSTP, IGMP Snooping, Link Aggregation (LACP), Port Mirroring |
| Quality of Service (QoS) | 8 priority queues, 802.1p, DSCP |
| Security | 802.1X, ACL, SSH/SSL, Port Security |
| Power Supply | AC 100-240V, 50/60Hz, internal PSU |
| Power Consumption | Max 45 Watts |
| Dimensions (W x D x H) | 440 x 230 x 44.5 mm (19-inch rack mount) |
| Weight | 3.2 kg |
| Operating Temperature | 0°C to 50°C |
| Certifications | CE, FCC |
| Cooling | Fanless or with fans (please check manual) |
| Cleaning | Use a soft, dry cloth. Do not use liquids or sprays. |
| Safety | Operate in well-ventilated area. Avoid moisture and extreme temperatures. |
| Spare Parts / Repairability | No user-serviceable parts. Contact Planet support for repairs. |
Frequently Asked Questions - SGS-6310-48T6X Planet
How do I access the web interface of the SGS-6310-48T6X?
Default IP address is usually 192.168.0.100. Connect a PC to any port, set your IP to the same subnet (e.g., 192.168.0.x), and open a browser to that IP. Login with default credentials (admin/admin). If not working, check the manual for reset procedure.
What is the default username and password?
The default username is admin and password is admin. It is strongly recommended to change the password upon initial login for security.
How do I reset the switch to factory defaults?
Press and hold the reset button (on the front panel) for about 10 seconds using a paperclip until the system LED starts blinking. The switch will reboot with factory settings.
Does this switch support VLAN?
Yes, it supports up to 4094 VLAN IDs, 802.1Q VLAN tagging, and various VLAN modes including trunk and access ports. Configuration can be done via web or CLI.
Can I use the SFP+ ports for 1G optics?
Yes, the SFP+ ports are backward compatible with 1G SFP modules. However, you may need to configure the speed manually in some cases.
How to enable Link Aggregation (LACP)?
Go to the LAG configuration page in the web interface, select ports to aggregate, choose LACP mode (active/passive), and apply. Ensure the connected device also supports LACP.
What is the maximum power consumption?
The maximum power consumption is approximately 45 Watts under full load. Actual consumption may vary based on port usage and module type.
Does the switch support PoE?
No, the SGS-6310-48T6X does not support Power over Ethernet. It is a standard non-PoE switch.
Can I manage the switch via SSH?
Yes, SSH is supported for secure command-line management. Enable SSH in the management settings and connect using any SSH client.
What should I do if the switch is overheating?
Ensure proper ventilation around the switch. Check that fans (if present) are spinning. Reduce ambient temperature or install in a cooler environment. Overheating can cause performance issues.
User questions about SGS-6310-48T6X Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual SGS-6310-48T6X - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SGS-6310-48T6X by Planet.
USER MANUAL SGS-6310-48T6X Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : SGS-6310-48T6X
Category : Network switch