BSP-115PV-15A - Network switch Planet - Free user manual and instructions
Find the device manual for free BSP-115PV-15A Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Layer 2+ PoE Switch |
| Model | BSP-115PV-15A |
| Number of Ports | 15 |
| PoE Standard | IEEE 802.3af/at |
| PoE Power Budget | 120W |
| Dimensions (W x D x H) | 440 x 200 x 44 mm |
| Weight | 3.5 kg |
| Power Supply | 100-240V AC, 50-60Hz |
| Switching Capacity | 7.6 Gbps |
| MAC Address Table | 8K entries |
| VLAN Support | 802.1Q VLAN, up to 256 groups |
| Management Interfaces | Web, CLI, SNMP |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -10°C to 70°C |
| Humidity | 5% to 90% non-condensing |
| Safety | CE, FCC, RoHS compliant |
| Maintenance | Clean with a dry cloth, avoid liquids |
| Mounting | 19-inch rackmount, desktop |
| Package Contents | Switch, power cord, mounting kit, user manual |
Frequently Asked Questions - BSP-115PV-15A Planet
How to reset the Planet BSP-115PV-15A to factory defaults?
Press and hold the factory reset button (located near the power port) for 10 seconds using a paperclip, then release. The switch will reboot with default settings.
What is the PoE power budget of this switch?
The PoE power budget is 120W total, with up to 30W per port for IEEE 802.3at devices.
Can I use this switch for outdoor installations?
No, the BSP-115PV-15A is designed for indoor use only. It should be kept in a dry, ventilated environment.
How to access the web management interface?
Connect your computer to any port, set a static IP in the same subnet (default switch IP: 192.168.0.100), then open a browser and enter the default IP. Default username/password: admin/admin.
Does this switch support VLAN configuration?
Yes, it supports IEEE 802.1Q VLAN with up to 256 VLAN groups and port-based VLAN.
What is the maximum cable length for PoE?
The maximum cable length for PoE is 100 meters (328 feet) using standard Cat5e or better Ethernet cable.
How to update the firmware?
Download the latest firmware from the Planet official website, then upload it via the web interface under System > Firmware Upgrade. Do not power off during update.
Is the switch rackmountable?
Yes, it comes with rackmount brackets for a standard 19-inch rack. It also can be placed on a desktop.
What power cable does it use?
It uses a standard IEC C13 power cable rated for 10A. The switch accepts 100-240V AC input.
How to troubleshoot if a PoE device is not powering on?
Check the Ethernet cable, ensure the device is IEEE 802.3af/at compliant, verify the PoE budget is not exceeded, and try a different port. Also check the PoE status via the web interface.
User questions about BSP-115PV-15A Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual BSP-115PV-15A - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BSP-115PV-15A by Planet.
USER MANUAL BSP-115PV-15A Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : BSP-115PV-15A
Category : Network switch