Power Titanium 300 Easygo - Kitchen appliance CECOTEC - Free user manual and instructions

Product type	Immersion blender
Brand	Cecotec
Model	Power Titanium 300 Easygo
Power	300 W
Bowl capacity	500 ml
Blade material	Titanium
Main functions	Blend, chop, emulsify
Speeds	2 speeds + turbo
Power supply	220-240 V, 50/60 Hz
Cord length	1.2 m
Weight	0.8 kg
Dimensions (L x W x H)	40 x 6 x 6 cm
Body material	ABS plastic
Color	Black / Silver
Care and cleaning	Removable dishwasher-safe blades
Safety	Safety locking system
Included accessories	Blending foot, measuring cup, whisk
Warranty	2 years
Spare parts available	Yes, bowl, blades, seal

Frequently Asked Questions - Power Titanium 300 Easygo CECOTEC

How to use the Power Titanium 300 Easygo immersion blender?

Plug in the appliance, insert the blending foot into the bowl, select the desired speed (1 or 2) and press the button. Use the turbo function for maximum power.Never immerse the motor unit.

Can I blend hot foods?

Yes, but let cool to a maximum of 60°C to avoid damaging the bowl. Use the heat-resistant measuring cup.

How to clean the blades?

Detach the blending foot from the motor unit. The blades can be washed by hand or in the dishwasher. Dry thoroughly before reassembling.

The blender is making abnormal noise, what should I do?

Check that the blades are properly attached and that no hard food is stuck. Reduce speed. If the noise persists, contact customer service.

Can I blend ice?

Yes, use the turbo function in pulses. Do not fill the bowl more than halfway with ice. Ensure the blades are titanium to withstand.

How to change speed?

Turn the dial on the motor unit to switch from speed 1 (gentle) to speed 2 (fast). The turbo button is located on top for momentary use.

The power cord is short, can I use an extension cord?

Yes, use a suitable extension cord (minimum 10 A) for convenience. Ensure the cord is not stretched.

What to do if the blender does not start?

Check that the bowl is properly engaged and the locking system is activated. Make sure the outlet works. If nothing happens, contact after-sales service.

Can I blend directly in a pot?

Yes, use the blending foot in a pot, but avoid scratching the bottom. Do not exceed the indicated maximum fill level.

Where to find spare parts?

You can order parts (bowl, blades, seal) on the official Cecotec website or from authorized dealers. Keep the model reference.

USER MANUAL Power Titanium 300 Easygo CECOTEC

Safety instructions 7

1. Parts and components 35

2. Before use 35

3. Operation 35

4. Cleaning and maintenance 36

5. Technical specifications 37

6. Disposal of old electrical and electronic appliances 37

7. Technical support and warranty 37

8. Copyright 38

SOMMAIRE

Read these instructions thoroughly before using the device. Keep this instruction manual for future reference or new users.

• All safety instructions must be closely followed when using the appliance.
• Check the power cable regularly for visible damage. If the power cable is damaged, it must be replaced by the Technical Support Service of Cecotec or similar qualified personnel to avoid risks.
• Warning: incorrect or improper use can be dangerous for the user and damage the appliance. Use the appliance only for the purposes described in this manual.
• Make sure the ingredients do not exceed the 600-ml mark on the surface of the blending container.
• Switch off the appliance and unplug it from the mains before changing accessories or nearby parts that move during use.
• Always unplug the appliance if left unattended and before assembly, disassembly, or cleaning.
• The device is not intended to be used by children. Keep this device and its power cord out of their reach.
• The appliance can be used by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children must not play with the device.

• This device is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.

• Make sure that the mains voltage matches the voltage stated on the product marking and that the wall outlet is grounded.

• Do not immerse the cable, plug, or any other non-removable part of the device in water or any other liquid or expose electrical connections to water. Make sure your hands are dry before handling the plug or switching on the device.
• Do not use the appliance if its cable, plug, or housing are damaged, nor after it malfunctions or has been dropped or damaged in any way.
• Do not twist, bend, pull, or damage the power cable. Protect it from sharp edges and heat sources. Do not allow the cable to touch hot surfaces. Do not let the cable hang over the edge of the surface or worktop.
• This appliance is not intended to be operated by means of an external timer or separate remote-control system.
• Turn off and unplug the appliance from the mains supply when not in use and before cleaning it. Pull from the plug, not the cable, to disconnect it from the outlet.
• Do not use accessories that have not been provided by Cecotec, as this could damage the product and cause injuries.
• Place the appliance on a dry, stable, flat, heat-resistant surface.
• Do not try to repair the device by yourself. Contact the official Cecotec Technical Support Service for advice.

• Cleaning and maintenance must be carried out according to this instruction manual to make sure the appliance functions properly. Turn off and unplug the appliance before moving and cleaning it.

• Cleaning and maintenance tasks must not be carried out by children.

• Do not wash the appliance's main body in the dishwasher.
• Do not use the blender with hard foods such as bones, shelled nuts, frozen meats, etc., as it could damage the blades or the motor.
• Do not use the blender with hot or boiling liquids. Allow them to cool down before processing them.
• No liability is accepted for any eventual damage or personal injuries derived from misuse or non-compliance with this instruction manual.

INSTRUCTIONS DE SÉCURITÉ

the graphics in this manual are schematic representations and may not exactly match the device.

2. BEFORE USE

• This appliance is packaged in a way as to protect it during transport. Take the device out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent damage to the device when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.

Box content

Depending on the product purchased, the contents of the box will vary.

• For the Power Titanium 300 model, in the box you will find the blender with its cup and blade assembly, as well as this instruction manual.
• For the Power Titanium 300 EasyGo model, you will find the same contents as for the previous model, but with an extra cup and two cooling tubes.

3. OPERATION

1. Place the cup on a flat surface. Next, add the desired ingredients into the cup up to the MAX mark.
2. Connect the blade assembly to the cup opening. Turn the cup upside down and place it in the blender base using the arrows as a guide. Press the cup against the base. With a

ENGLISH

single touch, the blender will start working. To operate the blender hands-free, simply attach the cup to the base by turning it clockwise. The blender will stop when you stop pressing the cup against the base or when you unlock it from the base. Turn the bottle upside down and place it on a flat surface.

1. Replace the blade assembly with the cap.

WARNING: avoid touching the sharp blades. If the blades get stuck, unplug the appliance and remove the ingredients that are blocking the blades with a spatula.

WARNING: do not fill the cup above the MAX mark.

WARNING: never fill the cup with hot ingredients that are hotter than 60 °C.

WARNING: do not let the blender run for more than 1 minute each time you use it. If, after 1 minute, the ingredients are still not fully blended, switch off the blender and wait another minute before continuing to use it.

Cooling tubes

The cooling tubes are used to maintain the mixture at a low temperature after blending. To use them, follow the instructions below:

1. Fill the cooling tubes with water, close them and let them in the freezer for 12 to 24 hours.

NOTE: do not fill them to the top, as the expansion of the ice could cause them to break.

1. Rotate the cup to unlock it and remove it from the base. Unscrew the blade assembly, screw the cooling tube into the cap and close the cup again using the cap.

NOTE: to attach the cooling tube to the cap, press against the inside of the cap and twist without excessive force. Fig. 2

4. CLEANING AND MAINTENANCE

For ease of cleaning, we recommend that you clean the cup and blades immediately after use. Do not use abrasive products, scouring pads or alcohol to clean the appliance. Never immerse the blender base in water or wash it in the dishwasher.

1. Unplug the appliance and remove the detachable parts.

2. Wash the parts with lukewarm water and a little detergent and rinse them thoroughly under running water. You can also wash the cup in the dishwasher.

3. If necessary, remove the rubber seal from the blade assembly and rinse it with water.

4. Only use a damp cloth to clean the base of the blender.

NOTE: to clean the cooling tubes, simply add a little soap and water inside and shake them for a few seconds. Rinse with plenty of water until all soap residue has been removed. Afterwards, you can use them again.

5. TECHNICAL SPECIFICATIONS

Product reference: 04395/03907

Product: Power Titanium 300 single-serve blender/Power Titanium 300 EasyGo single-serve blender

Voltage: 220 - 240 V

Frequency: 50/60 Hz

Power: 300 W

Technical specifications may change without prior notification to improve product quality. Made in China | Designed in Spain

6. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities.

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

Compliance with the above guidelines will help protecting the environment.

7. TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.

It is recommended that repairs be carried out by qualified personnel.

ENGLISH

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at [phone].

8. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

1. PIÈCES ET COMPOSANTS

Img. 1

Fig. / Img. / Rys. / Obr. 2

www.cecotec.es