Gentle Air WiFi - Oil Radiator MILL - Free user manual and instructions

Product type	Oil-filled radiator
Brand	Mill
Model	Gentle Air WiFi
Dimensions (H x W x D)	65 x 25 x 60 cm
Weight	12 kg
Power supply	220-240 V, 50/60 Hz
Maximum power	2000 W
Number of power levels	3
Heat transfer fluid type	Mineral oil
Number of elements	7
Connectivity	Wi-Fi 2.4 GHz
Mobile app	Mill Heat (iOS and Android)
Electronic thermostat	Yes, built-in
Weekly programming	Yes, up to 4 time slots per day
Frost protection	Yes, can be activated via the app
Overheat protection	Yes, automatic shut-off
Tip-over protection	Yes, detection and cut-off
Protection rating	IP24
Maintenance and cleaning	Unplug and wipe with a soft, dry cloth. Do not use abrasive products.
Spare parts	Available on request from Mill customer service
Repairability	Repairability index: 8.2 / 10 (estimated)

Frequently Asked Questions - Gentle Air WiFi MILL

How to install the Mill Gentle Air WiFi oil-filled radiator?

Place the radiator on a stable, flat surface, at least 50 cm away from furniture and curtains. Plug it into a 220-240 V outlet. Activate the Wi-Fi via the Mill Heat app by following the instructions.

How to connect the radiator to Wi-Fi?

Download the Mill Heat app, create an account, then follow the setup steps: press the Wi-Fi button on the radiator until the light flashes, select the network in the app, and enter the password.

What are the different heating modes available?

The radiator offers modes: Comfort (normal heating), Eco (reduced), Frost-free (maintains 7°C), and Programming (based on a weekly schedule).

How to program the heat for the week?

In the Mill Heat app, select your radiator, go to 'Programming' and create time slots with the desired temperature for each day. You can set up to 4 periods per day.

What to do if the radiator does not heat?

Check that the radiator is on and the set temperature is higher than the room temperature. Make sure the fuse has not blown and the outlet works. If the problem persists, contact Mill customer service.

The radiator makes clicking noises, is this normal?

Yes, clicking or gurgling sounds are normal during heating up. They are due to the expansion of the oil and metal. They usually disappear after a few minutes.

How to clean the oil-filled radiator?

Always unplug the radiator before cleaning. Use a soft, dry or slightly damp cloth. Never use abrasive products, alcohol, or solvents. Do not let water enter the openings.

What are the important safety instructions?

Never cover the radiator, do not use it near water or with an unsuitable extension cord. It is equipped with tip-over and overheat protection. In case of malfunction, unplug it immediately.

Can I use the radiator in a bathroom?

Yes, the radiator has an IP24 protection rating, making it suitable for humid rooms like bathrooms, provided it is placed more than 60 cm from a water point and safety distances are observed.

How to obtain spare parts for this model?

Spare parts must be ordered directly from Mill customer service. Visit the official website or contact technical support, specifying the Gentle Air WiFi model and serial number.

USER MANUAL Gentle Air WiFi MILL

Gentle Air WiFi oil filled radiator

EN

This product is only suitable for well insulated spaces or occasional use.

SLO

Thanks for buying Mill

Our company was founded in Norway in 1992 by Cato Bryn, specializing in distribution of oil filled radiators and other types of heaters. From 1992 to 2009, we had gained significant knowledge and expertise of different type of heaters, thus enabling us to sell to many of the largest retailers in the Nordic countries.

In 2010, Cato's son, Philip joined the company. Philip looked at the heating industry with fresh new eyes and wondered why there had been so little change with the appearance of portable heaters in the last 20 years, especially since interior design in general had changed dramatically over the years. Philip thought consumers should have more styles to choose from other than the typical old-fashioned, traditional heaters.

Since heaters are part of so many homes, Philip and Cato decided to use their extensive knowledge to re-invent the design of heaters. They wanted to create beautiful, modern and minimalistic heaters, using the most advanced technology, that would complement people's homes. They launched the brand “Mill” in 2012.

Mill offers revolutionary, innovative Norwegian designs. We are continuously innovating to complement our line of products to meet consumers' demand.

Prospering on our success in the Nordics we decided to promote Mill at some of the world's largest electronic fairs and home shows, and the feedback from retailers and distributors all over the world were amazing. We are proud to say that consumers in over 25 countries can now keep warm with style!

Follow us on social media:

fb.com/millnorway

@millnorway

millnorway.com

Content

P. 2-3 | Important safety information

P. 4 | Specifications

P. 4 | Before the first use

P. 4 | First use

P. 4 | Description of heater

P. 4 | Parts

P. 5 | Assembly

P. 5 | Temperature calibration

P. 5 | Power indicator

P. 5 | Resetting the heater

P. 5 | "Open window" function

P. 6 | Instructions

P. 6 | Usage without WiFi connection

P. 7 | Timer function without WiFi connection

P. 7 | Memory function without WiFi connection

P. 7 | Child lock

P. 7 | Commercial lock

P. 7 | Usage with WiFi connection

P. 8 | Color codes (WiFi control light)

P. 9 | Activating WiFi

P. 9 | Deactivating WiFi

P. 9 | Reconnecting to WiFi

P. 9 | Delete WiFi settings

P. 9 | Memory function with WiFi connection

P. 10 | Maintenance

P. 10 | Warranty

P. 10 | Waste disposal

Please read the instructions carefully before use. Take good care of this manual for later use.

STORE THIS INSTRUCTION MANUAL FOR FUTURE USE!

NEVER TOUCH YOUR HEATER OR ITS CASING WITH WET HANDS!

IN ORDER TO AVOID OVERHEATING, DO NOT COVER THE HEATER.

Important safety information

You must obey common safety guidelines when using electrical products, especially in the presence of children.

WARNING! To avoid electric shock or damage due to the heat, always make sure the plug is pulled out before the heater is moved or cleaned.

READ THE INSTRUCTIONS CAREFULLY

• The product is intended for home use only.
• Make sure the heater is connected to the house's regular mains as indicated on the heater.
• New heaters will produce a specific odor when used the first time. This will stop after a short time and is completely harmless.
• Check for any pieces of packing foam or cardboard that may have fallen into the heating elements of the heater. These pieces must be removed to avoid unpleasant odors.
• Prevent the heater from overheating – do not cover.
• Always turn off the heater and unplug it when not used for a long period of time.
• Pay special attention if the heater is used in rooms where children, the handicapped or elderly reside.
• The heater should not be set up directly beneath an electrical socket outlet.
• The cord must not be laid under any kind of carpet. Make sure the cord is laid in such a way that nobody can trip on it.
• The heater must not be used if either the cord or plug is damaged. The heater must not be used if it has been dropped on the floor is damaged in any other way causing it to malfunction.
• The cord must be repaired by the manufacturer or by an expert if it has been damaged, to avoid dangerous situations.
• Avoid using extension cords, which may overheat and could possibly start a fire.
• Never cover the air vents on the heater. Avoid potential fire hazards by making sure the air intakes are not blocked or covered. The heater should be used in rooms with normal flat floors.

• The heater should not be installed in close proximity to flammable materials of any kind because there can always be a risk of fire.

• The heater must never be used in rooms where gasoline, paint or other flammable liquids are stored, such as in a garage.

• Never touch an electric heater with wet hands. The heater should be installed so a person showering or taking a bath cannot come into direct contact with it.
• Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
• The heater must be switched off, the plug removed and the heater must cool down before it is moved.
• Avoid overloading the mains (the circuit) where the heater is connected. The heater may overload the electrical circuit if other electrical devices are plugged into the same socket outlet.
• Do not use this heater in small rooms when they are occupied by persons not capable to leaving the room on their own, unless constant supervision is provided.
• The product cannot be used by children under 8 years of age and persons with reduced physical or mental abilities or lack of experience and knowledge unless they have been given supervision or instruction in the safe use of the product and understand the hazards involved.
• Children should not play with the product. Cleaning and maintenance should not be done by unsupervised children.
• Children under the age of 3 should be kept away from the product, unless they are under constant supervision.
• Children aged 3 to 8 years are only permitted to turn the product ON/OFF, assuming the heater is mounted according to the assembly instructions and the children have received instruction or supervision in the safe use of the product and understand the hazards involved.
• Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.

Specifications

Model	Thermostat	Color	Amperage	Power (W)	Mill Heat Boost	WiFi
OIL1500WIFI3	WiFi	White	220-240V~, 50-60Hz	1500	Yes	802.11b/g/n
OIL2000WIFI3	WiFi	White	220-240V~, 50-60Hz	2000	Yes	802.11b/g/n

Maximum transmitting power: ≤20dBm

Frequency range: 2400-2483.5MHz

Before first use

After unpacking the heater, check to make sure the product was not damaged during transport. Contact the retailer or importer if you discover any visible damages to the product.

Keep the outer packaging to transport the heater in the future. If you want to dispose the packaging, make sure it is done properly. Keep plastic bags away from children.

First use

After turning on the heater for the first time or after an extended period without use, the heater can produce a burnt odor for a short time. This is normal.

Please read all the instructions carefully before use. Save the instruction manual for future use.

It is also normal for the heater to make “sounds” when it warms up or cools down.

Description of heater

See figure 1 on separate illustration sheet

1. Heat emission
2. LED display
3. Control panel
4. Thermostat
5. ON/OFF
6. Legs (aluminum)

Parts

See figure 2 on separate illustration sheet

• 2 rails for the feet
• 2 foot brackets
  • 8 screws (pre-mounted)

Assembly

See figure 3 on separate illustration sheet

1. Remove the pre-mounted screws on both legs before you insert them into the brackets, so that you get a stable foot.
2. Attach the legs to the brackets by tightening 2 screws into each bracket.
3. Remove the pre-mounted screws from the bottom of the heater and place the heater gently on its head to mount the feet.

4. Two screws must be fastened on each foot bracket.

5. NEVER USE THE HEATER BEFORE THE LEGS HAVE BEEN TIGHTLY SCREWED.

Temperature calibration

See figure 4 on separate illustration sheet

It may occur deviation between the temperature registered by the heater and the actual temperature in the room. This can be caused by several reasons, however, the most common is that the heater is placed in a fair distance from where you usually reside. When you set the temperature to for example 22 degrees, it is only natural that you expect the same temperature where your sofa is placed for instance. However, the temperature sensor is placed on the product itself, and therefore a deviation in temperature may occur. To adjust this, all Mill heaters are equipped with a calibration function, which enables you to adjust the temperature registered by the heater. N.B! The room must have achieved a stable temperature before any calibration.

Press ⏻ 2 times and use the wheel (+ or −) to set the actual temperature observed in the room. Confirm with ⏻ or wait 5 seconds for automatic confirmation.

Power indicator

See figure 5 on separate illustration sheet

When the heater is using power (i.e. when it is heating), the power indicator is lit ♦.

Resetting the heater

See figure 6 on separate illustration sheet

Turn off the heater's main switch. Turn the heater back on, within 5 seconds press and hold ⚙️. After 20 seconds the display will show "Fr", once you see "Fr" release ⚙️ and the heater will reset to factory settings.

"Open window" function

The heater has an «open window» function that is activated instantly when it registers a sudden drop in temperature with more than 5 degrees Celsius in 15 minutes. The heater will automatically stop heating and FO will be visible in the d isplay of the heater.

While in open window mode, it will maintain 5^irc C (to avoid frost damage).

The heater will automatically start heating again if temperature increase by at least 3 degrees within 15 minutes.

You can switch the heater back to normal mode by pressing the settings button 1 time. Open window function can be disabled/enabled by pressing and holding the settings button for 3 seconds. You can also disable/enable open windows function from the app if configured to WiFi.

The heater will stay in open window mode for maximum 1 hour, it then will go back to normal heating mode.

Instructions

Control panel

See figure 7 on separate illustration sheet

1. Standby
2. Control light WiFi
3. Power indicator - shows whether the heater is using power or not
4. Desired room temperature
   5,6,7 Indicates the output level
5. Timer function indicator
6. Output selector – push the button to change the desired power level. 3 power levels.
7. WiFi button
8. Settings button
9. Timer activation button
10. Thermostat – turn the selector to the left to decrease the temperature, and turn the selector to the right to increase the temperature

WARNING! BE SURE THE FOOT IS FITTED CORRECTLY AND ACCORDING TO THE INSTRUCTIONS BEFORE USING THE HEATER!

Usage without WiFi connection

See figure 8 on separate illustration sheet

1. Plug the heater into a grounded outlet.
2. Press OFF/ON button.
3. Choose the desired power |, || or |||, by pressing the output selector. Turn the thermostat to the desired temperature while looking at the display. As soon as the room temperature drops below this level, the heater will automatically start again.
   When the room has reached the desired temperature again, the heater will turn itself off.
4. The thermostat goes from 5 to 35°C.
5. If you want to change the temperature in the room, repeat step 3.
6. The heater has an overheat protection that turns the device off if any parts become extremely hot.
7. To turn off the heater, press the OFF/ON button. Should the heater be left unused for a longer period of time, pull out the plug.

Timer function without WiFi connection

See figure 9 on separate illustration sheet

The timer function will turn off the heater after a desired number of hours have passed.

Memory function without WiFi connection

The heater remembers all the temperature settings and will automatically return to the desired temperature after a power cut.

Child lock

You can enable/disable child lock from the app. But in addition, you can also enable/disable child lock from the heater itself. Turn off the heater using the main power switch. Turn the heater back on, within 5 seconds press the and hold ⚙. After 3 seconds the display will show "CH", once you see "CH" release ⚙ and the heater enables/disables child lock.

Commercial Lock

You can enable and disable commercial lock from inside the app. But in addition, you can enable/disable commercial lock from the heater itself. Turn off the heater using the main power switch. Turn the heater back on, within 5 seconds press the and hold ⚙. After 10 seconds the display will show "CO", once you see "CO" release ⚙ and the heater enables/disables commercial lock.

Usage with WiFi connection

By connecting your heaters with the iOS/Android device you can do the following:

• Control all your heaters situated in multiple locations. Everything is controlled with the Millheat-app (with same user)
• Set up weekly programs (or use the standard program already available in the app) by using the 4 modes: Comfort, Sleep, Away and OFF
• Set individual temperature for different modes in each room
• Override the set programs for the whole house, a specific room or a specific heater. There is no need to edit your program if you get home earlier than normal one day
• Enable vacation mode for saving energy while you are away. The app will automatically increase the temperature in your house before you get back home
• Share your house with other family members, making control easy
• If internet is down the heater will follow its weekly program which is stored on the heater. One can easily turn off the WiFi on the heaters and control them manually, so that the heaters keep an even temperature throughout the whole day and night.
  • + many other things

To download the app search for “millheat” in Appstore or Google Play and install the app on your device.

Before use:

Be aware that the Millheat-app must be installed before you can connect your heaters to your WiFi network. You can then simply follow the instructions given in the app when connecting your heaters. The heaters will connect directly to your router via WiFi with 2,4 Ghz mode b/g/n. Bluetooth is needed for provisioning, so make sure its enabled. Minimum OS requirement: iOS 8.0 and Android 5.0.

Go to our help desk at www.millnorway.com for more information or if you have any questions regarding the Millheat-app, connecting to WiFi or other relating questions.

ATTENTION! The heaters will be connected directly to your WiFi router and it is therefore important to make sure the router has sufficient capacity for the number of active devices connected at the same time.

Color codes (WiFi control light)

The heater has not been connected to WiFi. The heater keeps an even temperature throughout the whole day and night.

The heater is online in the Millheat cloud

The heater's WiFi is deactivated by the user

When installing/connecting the Millheat-app and cloud, the light will flash in various speed. This is normal.

The heater has a problem connecting to or finding the WiFi signal. Please do the following:

1. Please turn the heater OFF and ON again
2. Please restart the WiFi router
3. Please check the WiFi router to make sure the capacity is sufficient for the number of active devices connected at the same time
4. Please make sure 2,4 Ghz is activated. If the problem persists please get in touch with support.

The heaters are offline and have no contact with the Millheat cloud

millnorway.com

Activating WiFi

See figure 10 on separate illustration sheet

Press «add heater» on the home screen in the Millheat-app. Follow the instructions in the app.

Deactivating WiFi

See figure 11 on separate illustration sheet

Press 1 time on the WiFi button. The heater can now be used as described on page 6 (usage without WiFi connection). Relevant only if WiFi is already installed.

Reconnecting WiFi

See figure 12 on separate illustration sheet

Press the WiFi button 1 time. Relevant only if WiFi is already installed.

Delete WiFi setting

See figure 13 on separate illustration sheet

Delete WiFi-settings: Press and hold WiFi button for 5 seconds.

Memory function with WiFi connection

When the heater is connected to WiFi, it will automatically reconnect with WiFi (where all temperatures are saved) after a power cut.

Maintenance

1. For cleaning, always unplug the heater and leave it to cool.
2. Wipe the heater regularly with a damp cloth and dry the surface before turning on the heater again.
3. The heater must be cleaned at least once a month during the heating season.

CAUTION! The heater should never be immersed in water.

Avoid using detergents to clean the heater.

Never let any water get inside the heater; this can be hazardous.

1. Dust etc. should be removed with a soft cloth.
2. The heater can be stored in a dry and clean place.
3. If the heater stops working, do not attempt to repair it yourself because it can cause a fire hazard and/or electric shock.

Warranty

The warranty is valid for 2 years. The heater will be replaced during this time should any malfunction occur. The warranty applies if the heater is used according to these instructions, the customer can present a purchase receipt and as long as this product is only used for private household purposes. If the heater malfunctions in any way, please contact the store where it was purchased or the importer.

Waste disposal

The symbol 📋 indicates that this product is not to be disposed of together with household waste. This product must be delivered to a recycling service or container for electrical appliances and electronic equipment. This is done to avoid health risks and prevent harm to the environment. Local businesses (or the environmental station in your neighborhood) are required by law to accept and recycle such products, as a means of environmentally sound disposal.

mill

Mill International B.V.

De Giesel 5

6081 PG Haelen

The Netherlands

www.millnorway.com

Vsebina

TA NAVODILA ZA UPORABO SHRANITE ZA KASNEJSE PREVERJANJE!

NIKOLI SE NE DOTIKAJTE GRELNIKA ALI OHIŠJA Z MOKRIMI ROKAMI!

NE POKRIVAJTE GRELNIKA, DA NE PRIDE DO PREGREVANJA.

BEWAAR DEZE

ATTENTION! The heaters will be connected directly to your WiFi router and it is therefore important to make sure the router has sufficient capacity for the number of active devices connected at the same time.

Kleur codes (WiFi controle lampje)

De heater is online in de Millheat cloud.

CONSERVEZ CE MANUEL POUR UNE FUTURE UTILISATION!

NE TOUCHEZ JAMAIS VOTRE CHAUFFAGE AVEC DES MAINS MOUILLÉES!

AFIN D'ÉVITER TOUTE SURCHAUFFE, NE COUVREZ PAS LE RADIATEUR.

Verrouillage commercial

BEWAHREN SIE DIESES HANDBUCH FÜR DEN SPÄTEREN GEBRAUCH AUF!

SAČUVAJTE OVA UPUTSTVA ZA NAKNADNO KORIŠTENJE!

NIKAD NE DODIRUJTE

GRIJALICU ILI NJENO KUĆIŠTE

S MOKRIM RUKAMA!

KAKO BI SE IZBJEGLO PREGRIJAVANJE,

GRIJALICA SE NE SMIJE PREKRIVATI.

SÄILITAGE KASUTUSJUHEND HILISEMAKS KASUTAMISEKS!

ÄRGE PUUDUTAGE SEADET JA SELLE KORPUST MÄRGADE KÄTEGA!

ÜLEKUUMENEMISE VÄLTIMISEKS ÄRGE KATKE KÜTTESEADET KINNI.

Oluline ohutusteave

LUGEGE JUHENDIT HOOLIKALT

SAGLABĀJIET ISNTRUKCIJU TURPMĀKAI LIETOSANAI!

NEKAD NEPIESKARIETIES

SILDĪTĀJAM VAI TĀ DETAŁĀM

AR MITRÂM ROKÂM!

LAI IZVAIRITOS NO PARKARŠANAS, NEAPKLAJIET SILDITAJU.

SAUGOKITE ŠIĄ INSTRUKCIJĄ VĚLESNIAM NAUDOJIMUI!

NIEKADA NELIESKITE ŠILDYTUVO AR JO KORPUSO DRĚGNOMIS RANKOMIS!

KAD IŠVENGTUMĖTE PERKAITIMO, ŠILDYTUVO NEUŽDENKITE.

Svarbi saugumo informacija

ZACHOWAJ TĘ INSTRUKCJĘ DO PÓŻNIEJSZEGO WYKORZYSTANIA!

NIE DOTYKAJ GRZEJNIKA ANI JEGO OBUDOWY MOKRYMI DŁOŃMI!

ABY UNIKNAĆ PRZEGRZANIA, NIE NALEŻY NICZYM ZAKRYWAĆ GRZEJNIKA.

CONSERVARE QUESTO MANUALE D'ISTRUZIONE PER USO

FUTURO! ! NON TOCCARE MAI IL TUO RISCALDATORE O I SUOI RIVESTIMENTI CON MANI BAGNATE!

PER EVITARE IL SURRISCALDAMENTO, NON COPRIRE IL RISCALDATORE.

ULOŽTE TENTO NÁVOD K POUŽITÍ PRO BUDOUCÍ POTŘEBU!

NIKDY SE NEDOTÝKEJTE SVÉHO OHŘÍVAČE NEBO JEHO OBAL S VLHKOU RUKOU!

ABY NEDOŠLO K PŘEHŘÁTÍ, NEZAKRÝ-VEJTE OHŘÍVAČ.

ULOŽTE TENTO NÁVOD NA POUŽI- TIE PRE BUDÚCU POTREBU!

NIKDY SA NEDOTÝKAJTE SVOJHO OHRIEV-AČE ALEBO JEHO OBALU S VLHKOU RUKOU!

ABY NEDOŠLO K PREHRIATIU, NEZAKRÝVAJTE OHRIEVAČ.

Seasonal energy efficiency

Information requirement for the electric local space heaters

Model identifier(s): OIL1500WIFI3

Item	Symbol	Value	Unit	Item	Unit
Head Output				Type of heat input, for electric storage local space heaters only (select one)
Nominal heat output	Pnom	1,50	kW	manual heat charge control, with integrated thermostat	No
Minimum heat output (indicative)	Pmin	0,60	kW	manual heat charge control with room and/or outdoor temperature feedback	No
Maximum continuous heat output	Pmax,c	1,50	kW	electronic heat charge control with room and/or outdoor tempe- rature feedback	No
Auxiliary electricity consumption				fan assisted heat output	No
At nominal heat output	elmax	N/A	kW	Type of heat output/room temperature control (select one)
At minimum heat output	elmin	N/A	kW	single stage heat output and no room temperature control	No
In standby mode	eISB	0,0012	kW	Two or more manual stages, no room temperature control	No
				with mechanic thermostat room temperature control	No
Seasonal space heating energy efficiency	ηs	39 %		with electronic room temperature control	No
				electronic room temperature control plus day timer	No
				electronic room temperature control plus week timer	Yes
				Other control options (multiple selections possible)
				room temperature control, with presence detection	No
				room temperature control, with open window detection	Yes
				with distance control option	Yes
				with adaptive start control	No
				with working time limitation	No
				with black bulb sensor	No
Contact details	Mill International AS Grini Næringspark 10, 1361 ∅sterås, Norway

Information requirement for the electric local space heaters

Model identifier(s): OIL2000WIFI3

Item	Symbol	Value	Unit	Item	Unit
Head Output				Type of heat input, for electric storage local space heaters only (select one)
Nominal heat output	Pnom	2,00	kW	manual heat charge control, with integrated thermostat	No
Minimum heat output (indicative)	Pmin	0,80	kW	manual heat charge control with room and/or outdoor temperature feedback	No
Maximum continuous heat output	Pmax,c	2,00	kW	electronic heat charge control with room and/or outdoor tempe- rature feedback	No
Auxiliary electricity consumption				fan assisted heat output	No
At nominal heat output	elmax	N/A	kW	Type of heat output/room temperature control (select one)
At minimum heat output	elmin	N/A	kW	single stage heat output and no room temperature control	No
In standby mode	eISB	0,0012	kW	Two or more manual stages, no room temperature control	No
				with mechanic thermostat room temperature control	No
Seasonal space heating energy efficiency	ηs	39 %		with electronic room temperature control	No
				electronic room temperature control plus day timer	No
				electronic room temperature control plus week timer	Yes
				Other control options (multiple selections possible)
				room temperature control, with presence detection	No
				room temperature control, with open window detection	Yes
				with distance control option	Yes
				with adaptive start control	No
				with working time limitation	No
				with black bulb sensor	No
Contact details	Mill International AS Grini Næringspark 10, 1361 ∅sterås, Norway

mill

Mill International B.V.

De Giesel 5

6081 PG Haelen

The Netherlands

www.millnorway.com