Amped Buds - Earplug HMD - Free user manual and instructions
Find the device manual for free Amped Buds HMD in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless in-ear headphones |
| Model | Amped Buds |
| Brand | HMD |
| Dimensions (per earbud) | Approximately 2.0 x 2.0 x 1.5 cm |
| Weight (per earbud) | Approximately 5 g |
| Charging case weight | Approximately 40 g |
| Power | Built-in rechargeable lithium-ion battery |
| Battery capacity (earbud) | 50 mAh |
| Battery capacity (case) | 500 mAh |
| Playback time | Up to 6 hours (single charge) |
| Playback with case | Up to 24 hours |
| Connectivity | Bluetooth 5.2 |
| Noise cancellation | Active (ANC) with transparency mode |
| Controls | Touch (playback, volume, calls) |
| Water resistance | IPX4 (splash-resistant) |
| Material | ABS plastic and silicone (ear tips) |
| Care and cleaning | Clean with a soft, dry cloth. Do not use chemicals. |
| Safety | Do not expose to running water, excessive heat, or shocks. |
| Available replacement parts | Silicone ear tips (sizes S, M, L), USB-C charging cable |
| Repairability | Battery not user-replaceable. Repair by authorized center. |
Frequently Asked Questions - Amped Buds HMD
How do I pair the earbuds with my phone?
Open the charging case, the earbuds enter pairing mode. Enable Bluetooth on your phone and select 'Amped Buds'. Follow the on-screen instructions.
What is the actual battery life of the earbuds?
The battery life is about 6 hours of continuous playback on a single charge. With the case, you can get up to 24 hours total.
Are the earbuds water-resistant?
Yes, they are IPX4 certified, which protects against splashes and sweat, but do not immerse them.
How do I clean the earbuds?
Use a soft, dry cloth to clean the earbuds. Remove the ear tips and clean them separately with warm soapy water, then dry them thoroughly before reattaching.
Can I use a single earbud at a time?
Yes, each earbud can work independently in mono mode. Simply take out one earbud from the case and pair it.
How do I reset the earbuds?
Place both earbuds in the case, press and hold the button on the case for 10 seconds until the indicator flashes quickly. The earbuds will be reset.
Are the ear tips replaceable?
Yes, ear tips in sizes S, M, and L are included. You can also purchase compatible ear tips separately.
What to do if the sound is low or distorted?
Check that the ear tips are properly fitted and clean. Make sure the volume level on your device and earbuds is sufficient. If the problem persists, reset the earbuds.
How do I charge the case?
Use the included USB-C cable and plug it into a power adapter (not included) or a USB port. The case indicator shows charging status.
Are the earbuds compatible with all smartphones?
They are compatible with any device supporting Bluetooth 5.0 or later, including iOS and Android.
User questions about Amped Buds HMD
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Earplug in PDF format for free! Find your manual Amped Buds - HMD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Amped Buds by HMD.
USER MANUAL Amped Buds HMD
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HMD
Model : Amped Buds
Category : Earplug