YA 65 - Pump Comet - Free user manual and instructions
Find the device manual for free YA 65 Comet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | High pressure pump |
| Brand | Comet |
| Model | YA 65 |
| Category | Pump |
| Maximum pressure | 200 bar |
| Maximum flow rate | 15 L/min |
| Motor power | 3 kW |
| Supply voltage | 230 V single phase |
| Weight | 25 kg |
| Dimensions (L x W x H) | 500 x 300 x 400 mm |
| Body material | Cast iron |
| Seal type | Ceramic |
| Inlet connection | 3/4" BSP |
| Outlet connection | 1/2" BSP |
| Max water temperature | 50°C |
| Usage | High pressure cleaning |
| Maintenance | Regular oil change, filter cleaning |
| Safety | Safety valve, thermal protection |
| Spare parts | Available (seals, pistons, valves) |
| Repairability | Repairable by professional |
Frequently Asked Questions - YA 65 Comet
What is the maximum pressure of the Comet YA 65 pump?
The maximum pressure is 200 bar. Never exceed this limit to avoid damage.
How to start the YA 65 pump?
Make sure the water supply is open and the fuse is in place. Plug in the power and operate the switch. Do not run the pump dry.
What oil should I use for the pump?
Use SAE 30 motor oil or a special high pressure pump oil. Check the oil level regularly.
How to clean the pump filters?
Unplug the pump, remove the inlet filter and rinse it with clean water. Put it back after drying. Clean the filter every month.
What to do if the pressure drops during use?
First check the inlet filter if it is clogged, then inspect the seals and valves. Insufficient water flow may also be the cause.
How to winterize the YA 65 pump?
Completely drain the water from the pump and hoses. Add non-toxic antifreeze if necessary. Store the pump away from frost.
Where can I find spare parts for the YA 65?
Spare parts are available from Comet authorized dealers or online. Search for references such as seals, pistons, valves.
Can the pump run dry?
No, never run the pump dry. This would damage the ceramic seals and the pump itself.
How to bleed air from the pump?
Slightly unscrew the outlet connection, operate the pump until water flows without bubbles, then retighten. Always bleed before first use.
What is the warranty of the Comet YA 65 pump?
The standard warranty is 2 years for manufacturing defects. Keep the invoice and follow the usage conditions.
User questions about YA 65 Comet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual YA 65 - Comet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. YA 65 by Comet.
USER MANUAL YA 65 Comet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Comet
Model : YA 65
Category : Pump