BP 110 - Pump Comet - Free user manual and instructions
Find the device manual for free BP 110 Comet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pressure Washer Pump |
| Model | BP 110 |
| Brand | Comet |
| Dimensions (L x W x H) | 30 cm x 20 cm x 20 cm |
| Weight | 5 kg |
| Power Source | Electric, 230 V / 50 Hz |
| Motor Power | 2.2 kW |
| Max Pressure | 110 bar |
| Flow Rate | 8 L/min |
| Functions | High-pressure water delivery for cleaning, adjustable pressure, automatic shut-off |
| Maintenance | Regular oil level check, clean inlet filter, inspect seals and pistons |
| Cleaning | Wipe exterior with damp cloth; avoid solvents; flush with clean water after use |
| Safety Features | Thermal overload protection, pressure relief valve, insulated handle |
| Spare Parts Available | Pistons, seals, valves, inlet filter, oil seals |
| Repairability Index | 7/10 – accessible design, common parts |
| General Information | Designed for residential light-duty pressure washing; compatible with standard hose fittings |
Frequently Asked Questions - BP 110 Comet
What type of oil should I use in the Comet BP 110 pump?
Use a high-quality non-detergent SAE 30 or SAE 20W-50 motor oil. Check the oil level regularly through the sight glass.
How do I change the oil?
Remove the oil drain plug, let the old oil drain completely, replace the plug, and refill with fresh oil up to the correct level. Dispose of used oil responsibly.
What is the maximum operating pressure?
The maximum pressure is 110 bar (about 1600 psi). Do not exceed this to avoid damage.
Can I use detergent with this pump?
Yes, but only use detergents specifically designed for pressure washers. Always flush the pump with clean water after using detergent to prevent residue buildup.
Why is the pump not building pressure?
Common causes: low water supply, clogged inlet filter, worn seals, or air in the system. Check water flow, clean filter, and prime the pump by running without nozzle briefly.
How often should I service the pump?
Check oil level before each use. Change oil after the first 50 hours, then every 200 hours or annually. Inspect seals and valves every 500 hours.
Is the Comet BP 110 pump suitable for continuous use?
It is designed for intermittent use. For continuous commercial use, consider a higher-duty pump. Allow the pump to cool after 30 minutes of operation.
What type of hose connection does it use?
It uses a standard 3/4 inch garden hose inlet and a high-pressure outlet with a quick-connect fitting.
The pump is making unusual noise – what could it be?
Unusual noise may indicate cavitation (low water supply), worn bearings, or broken valves. Stop use immediately and inspect.
Where can I find spare parts for the BP 110?
Spare parts are available through Comet authorized dealers or online. Common part numbers include seal kit, piston set, and valve assembly.
User questions about BP 110 Comet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual BP 110 - Comet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BP 110 by Comet.
USER MANUAL BP 110 Comet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Comet
Model : BP 110
Category : Pump