Xblitz

Energyboost PRO - Compressor Xblitz - Free user manual and instructions

Find the device manual for free Energyboost PRO Xblitz in PDF.

📄 84 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Xblitz Energyboost PRO - page 11
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Tire inflator compressor
Brand Xblitz
Model Energyboost PRO
Dimensions (L x W x H) Approx. 200 x 150 x 70 mm
Weight Approx. 1.2 kg
Power supply 12 V DC (cigarette lighter socket)
Maximum pressure 10.3 bar (150 PSI)
Air flow rate 35 L/min
Built-in pressure gauge Digital, LCD display
Pressure preset function Yes, automatic shut-off at desired pressure
LED light Yes, for night use
Included accessories Adapters for ball, bike, air mattress, etc.
Overheat protection Yes, automatic safety shut-off
Power cord length Approximately 3 m
Noise level Approx. 85 dB
Maintenance and cleaning Clean the device with a damp cloth. Do not immerse in water.
Safety Use only on a 12 V battery. Avoid prolonged continuous use.
Spare parts and repairability Spare fuse and hose available. Repair by authorized center.
Warranty 2 years (excluding wear parts)

Frequently Asked Questions - Energyboost PRO Xblitz

How to use the Xblitz Energyboost PRO compressor?
Plug the compressor into a 12 V cigarette lighter socket (engine running). Attach the hose to the tire valve. Turn on the device with the switch. Adjust the desired pressure using the + and - buttons. The compressor automatically stops when the pressure is reached.
What is the maximum pressure this compressor can reach?
The maximum pressure is 150 PSI (10.3 bar). Suitable for car, motorcycle, bicycle tires and balls.
Can I use this compressor on a car battery without a cigarette lighter?
Yes, if you have a battery clamp adapter (not included). The voltage must be 12 V.
How to set the desired pressure and use automatic shut-off?
Press the Set button to enter setup mode. Use the up/down arrows to set the pressure. The device will automatically stop once this pressure is reached.
What to do if the compressor does not start?
Check the fuse (located in the cigarette lighter plug). Replace it with a fuse of the same rating (10 A). Make sure the battery is sufficiently charged.
Can the compressor inflate bicycle tires?
Yes, thanks to the included Presta or Schrader valve adapter. Set the pressure according to the bicycle manufacturer's recommendations.
How to maintain the compressor?
Clean the device with a soft, damp cloth. Do not immerse it in water. Store it in a dry place. Check the air filter regularly and clean it if necessary.
Does the compressor overheat easily?
The compressor is equipped with thermal protection that shuts it off in case of overheating. Let it cool for 15 minutes before using it again.
Can I use adapters not included?
It is recommended to use only the included adapters to ensure compatibility and safety. Universal adapters can be used if the connection is airtight.
What is the length of the air hose?
The hose is approximately 70 cm long, allowing you to comfortably reach all tires of a sedan.

User questions about Energyboost PRO Xblitz

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Compressor in PDF format for free! Find your manual Energyboost PRO - Xblitz and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Energyboost PRO by Xblitz.

USER MANUAL Energyboost PRO Xblitz

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Xblitz

Model : Energyboost PRO

Category : Compressor