HM90SL - Saw SCHEPPACH - Free user manual and instructions
Find the device manual for free HM90SL SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Sliding Compound Mitre Saw |
| Model | HM90SL |
| Brand | Scheppach |
| Power Supply | 220-240V ~ 50Hz |
| Motor Power | 2000 W |
| Blade Diameter | 210 mm |
| Blade Bore | 30 mm |
| Idle Speed | 5000 rpm |
| Cutting Capacity 90° | 90 x 90 mm |
| Cutting Capacity 45° | 90 x 60 mm |
| Mitre Adjustment | 0° to 45° left and right |
| Bevel Adjustment | 0° to 45° left |
| Table Size | 500 x 200 mm |
| Dust Extraction Connector | 36 mm |
| Weight | 15 kg |
| Dimensions (L x W x H) | 600 x 300 x 400 mm |
| Protection Class | II |
| Safety Features | Blade guard, electric brake, spindle lock |
| Maintenance | Clean after use, check carbon brushes |
| Spare Parts Available | Yes, through Scheppach service |
Frequently Asked Questions - HM90SL SCHEPPACH
How do I change the blade on the Scheppach HM90SL?
Unplug the saw, use the spindle lock to hold the blade, then loosen the arbor bolt with the supplied wrench. Remove the outer flange and blade, replace with new blade, reassemble in reverse order. Ensure the blade rotates in the correct direction.
What size blade does the HM90SL use?
The saw uses a 210 mm diameter blade with a 30 mm bore.
Can I cut aluminium with this saw?
Yes, but you must use a blade designed for non-ferrous metals and secure the workpiece properly. Reduce feed rate for best results.
How do I adjust the mitre angle?
Loosen the mitre lock handle, rotate the table to the desired angle (0-45° left or right), and tighten the handle. The scale shows the angle.
Does the HM90SL have a laser guide?
No, the HM90SL does not come with a laser guide. You may purchase an aftermarket laser add-on if needed.
How do I connect a dust extractor?
Attach a vacuum hose with a 36 mm connector to the dust port at the rear of the saw. Use a suitable dust extractor for best performance.
What is the maximum cutting depth at 90°?
The maximum cutting depth is 90 mm at a 90° cut.
How do I adjust the bevel angle?
Loosen the bevel lock knob, tilt the saw head to the desired angle (0-45° left), and retighten the knob. Use the scale for precision.
What safety features are included?
The saw includes a blade guard, an electric brake that stops the blade quickly, and a spindle lock for safe blade changes.
Where can I find spare parts?
Spare parts are available through Scheppach service centers or authorized dealers. Provide the model HM90SL and serial number for correct parts.
User questions about HM90SL SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual HM90SL - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HM90SL by SCHEPPACH.
USER MANUAL HM90SL SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : HM90SL
Category : Saw