FX-HDR1800 - Pressure washer Fuxtec - Free user manual and instructions
Find the device manual for free FX-HDR1800 Fuxtec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | High-pressure cleaner |
| Brand | Fuxtec |
| Model | FX-HDR1800 |
| Power supply | Electric 230 V / 50 Hz |
| Motor power | 1800 W |
| Maximum pressure | 130 bar |
| Water flow rate | 480 l/h |
| Nominal pressure | 110 bar |
| Pump type | Brass piston pump |
| Main functions | Automatic shut-off, pressure regulator, foam system |
| Safety | Trigger safety lock, thermal protection |
| Hose length | 8 m |
| Cable length | 5 m |
| Dimensions (L × W × H) | 36 × 33 × 85 cm |
| Weight | 12.5 kg |
| Maintenance and cleaning | Clean water inlet filter, drain the pump in winter |
| Spare parts | Rotary nozzle, lance, high-pressure hose, fittings |
| Sound level (LpA) | 82 dB(A) |
| Vibrations | ≤ 2.5 m/s² |
Frequently Asked Questions - FX-HDR1800 Fuxtec
What type of oil to use for the pump?
Use a special oil for high-pressure pumps (SAE 30 or 15W40). Do not use regular motor oil. Check the level via the filler cap.
Can I use hot water?
No, this cleaner is designed only for cold water (max 40 °C). Hot water damages the pump and seals.
How to connect the water hose?
Connect the garden hose to the water inlet. Make sure the filter is clean and the water supply is open. Bleed the air before starting.
The cleaner does not start, what to do?
Check the power supply, plug, and cable. Make sure the switch is on "ON" and the trigger is pressed. If the problem persists, check the thermal cut-out.
How to use detergent?
Use the detergent tank or adapter. Dilute the detergent according to instructions. Apply at low pressure, then rinse at high pressure.
What pressure for washing the car?
Use moderate pressure (about 80-100 bar) with a wide nozzle to avoid damaging the paint. Keep a distance of at least 30 cm.
How to store the device?
Empty the water from the pump and hose. Coil the cable and hose neatly. Store in a dry, frost-free place.
What to do if the pressure is low?
Check that the water inlet filter is not clogged. Inspect the nozzle for a possible blockage. Make sure the supply hose is not kinked.
The cleaner is leaking oil, is this normal?
No, an oil leak indicates a defective seal. Stop the device immediately and contact customer service. Do not use with a leak.
How to descale the pump?
Use a special descaler for high-pressure cleaners. Follow the manufacturer's instructions. Rinse thoroughly after treatment. Regular maintenance extends the service life.
User questions about FX-HDR1800 Fuxtec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual FX-HDR1800 - Fuxtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FX-HDR1800 by Fuxtec.
USER MANUAL FX-HDR1800 Fuxtec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fuxtec
Model : FX-HDR1800
Category : Pressure washer