FX-EV360 - Uncategorized Fuxtec - Free user manual and instructions
Find the device manual for free FX-EV360 Fuxtec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Fuxtec |
| Model | FX-EV360 |
| Product type | Robotic vacuum and mop |
| Dimensions (L x W x H) | 340 x 340 x 90 mm |
| Weight | 2.8 kg |
| Power supply | Li-ion battery 14.8 V / 2600 mAh |
| Battery life | Up to 120 min |
| Charging time | Approximately 4 h |
| Water tank capacity | 300 ml |
| Dust bin capacity | 600 ml |
| Noise level | 55 dB |
| Cleaning modes | Automatic, spot, edge, schedule |
| Built-in sensors | Cliff sensor, bump sensor, carpet detection |
| Connectivity | Wi-Fi, smartphone app |
| Voice assistant compatibility | Alexa, Google Assistant |
| Maintenance and cleaning | Clean the dust bin, brushes, and sensors regularly |
| Safety | Automatic shutdown when lifted, obstacle detection |
| Spare parts and repairability | Brushes, filters, batteries, and tanks available online |
| Warranty | 2 years |
| General information | 160-page user manual available for download |
Frequently Asked Questions - FX-EV360 Fuxtec
How to install the app for the FX-EV360 robot vacuum?
Download the Fuxtec app from the App Store or Google Play. Create an account and follow the instructions to connect the robot to your 2.4 GHz Wi-Fi network.
What to do if the robot does not charge?
Check that the charging base is properly plugged in and the contacts are clean. If the problem persists, contact customer service.
How to schedule an automatic cleaning?
In the app, go to the 'Schedule' section and set the desired days and times. The robot will start automatically.
The robot does not detect obstacles, what to do?
Clean the bump and cliff sensors with a soft cloth. Make sure there are no obstacles that are too low.
How to clean the robot's brushes?
Remove the brushes by pressing the clips. Remove hair and debris. Wash them with warm water and let dry before reinserting.
Where can I find spare parts for the FX-EV360?
You can buy brushes, filters, and batteries on the official Fuxtec website or from authorized resellers.
The robot makes an abnormal noise, is this normal?
An unusual noise may be due to debris stuck in the brush or wheels. Check and clean the affected areas.
What is the maximum area the robot can clean?
With a battery life of 120 minutes, the robot covers approximately 150 m² in standard mode. Adjust the schedule according to the area.
How to reset the robot to factory settings?
Press and hold the power button for 10 seconds until you hear a beep. The reset is complete.
The robot does not connect to Wi-Fi, what to do?
Make sure you are on a 2.4 GHz network. Restart the robot and the router. Check that the app is up to date.
User questions about FX-EV360 Fuxtec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual FX-EV360 - Fuxtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FX-EV360 by Fuxtec.
USER MANUAL FX-EV360 Fuxtec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fuxtec
Model : FX-EV360
Category : Uncategorized