FX-E2VE38 - Uncategorized Fuxtec - Free user manual and instructions
Find the device manual for free FX-E2VE38 Fuxtec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless grass trimmer |
| Brand | Fuxtec |
| Model | FX-E2VE38 |
| Dimensions (L x W x H) | 120 x 25 x 25 cm |
| Weight | 3.5 kg |
| Power source | 36 V lithium-ion battery |
| Battery capacity | 2.5 Ah |
| Charging time | Approximately 60 minutes |
| Runtime | 30 to 40 minutes |
| Cutting width | 30 cm |
| Line type | Nylon line Ø 1.6 mm |
| Line feed system | Automatic bump feed |
| No-load speed | 7500 rpm |
| Speed settings | 2 speeds (eco and turbo) |
| Handle | Ergonomic handle with rubber coating |
| Protection | Protective housing and bumper |
| Sound level | 80 dB (A) |
| Vibration | 2.5 m/s² |
| Maintenance | Clean after each use, check screws |
| Spare parts | Battery, charger, cutting line, cutting head |
| Warranty | 2 years |
Frequently Asked Questions - FX-E2VE38 Fuxtec
How to charge the battery of the FX-E2VE38?
Plug the charger into a mains socket, then insert the battery into the charger. The red indicator shows charging; it turns green when charging is complete (about 60 minutes).
What is the battery runtime?
The runtime varies from 30 to 40 minutes in normal use, depending on the selected speed and vegetation thickness.
How to replace the cutting line?
Remove the cutting head, take out the used line, and wind a new nylon line Ø 1.6 mm in the direction indicated. Reassemble the head and cut the excess to 15 cm.
What to do if the device does not start?
Check that the battery is correctly inserted and charged. Make sure the safety button is pressed before pulling the trigger. If the problem persists, contact customer service.
Can I use a different charger than the one provided?
No, only use the original Fuxtec charger to avoid any risk of fire or damage to the battery.
How to clean the grass trimmer after use?
Remove the battery, clean the housing and cutting head with a soft brush and a damp cloth. Avoid abrasive products. Dry completely before storing.
Does the warranty cover wear parts?
The 2-year warranty covers manufacturing defects, but not wear parts such as cutting line or battery (unless premature failure).
What is the maximum cutting width?
The cutting width is 30 cm, ideal for lawn edges and small areas.
How to adjust the rotation speed?
Use the speed selector on the handle: position 1 for eco (optimal runtime), position 2 for turbo (maximum power).
Where can I find spare parts for the FX-E2VE38?
Spare parts are available on the official Fuxtec website or from authorized dealers. Refer to the manual for part numbers.
User questions about FX-E2VE38 Fuxtec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual FX-E2VE38 - Fuxtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FX-E2VE38 by Fuxtec.
USER MANUAL FX-E2VE38 Fuxtec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fuxtec
Model : FX-E2VE38
Category : Uncategorized