FX-GS36S - Uncategorized Fuxtec - Free user manual and instructions
Find the device manual for free FX-GS36S Fuxtec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Fuxtec |
| Model | FX-GS36S |
| Product type | Electric chainsaw |
| Power supply | 230 V / 50 Hz |
| Rated power | 2000 W |
| Guide bar length | 40 cm |
| Net weight | 5.5 kg |
| Oil tank capacity | 200 ml |
| Chain tension system | Tool-free |
| Chain brake | Yes |
| Chain speed at idle | 12 m/s |
| Sound level (LpA) | 100 dB(A) |
| Vibration level (front) | 6.0 m/s² |
| Main functions | Wood cutting, pruning, cross-cutting |
| Maintenance and cleaning | Clean after each use, regularly sharpen chain, check oil level |
| Safety | Chain brake, anti-kickback protection, dual-switch trigger |
| Spare parts and repairability | Guide bar, chain, spark plug (if thermal) available |
| Warranty | 2 years |
Frequently Asked Questions - FX-GS36S Fuxtec
How to start the FX-GS36S chainsaw?
Make sure the chain brake is disengaged. Plug in the appliance, hold the safety trigger, then press the switch. Release the safety trigger after starting.
How to properly tension the chain?
Loosen the guide bar nut, turn the tension screw clockwise until the chain touches the bottom of the guide bar. Slightly lift the chain in the middle, it should be able to rotate freely. Retighten the nut.
What type of oil to use for the chain?
Use a special chainsaw chain oil, preferably biodegradable, or SAE 30 motor oil. Never use used oil.
How to clean the guide bar?
Remove the guide bar and chain. Clean the grooves of the guide bar with a pointed tool. Use a wire brush to remove residues. Check the wear of the guide bar.
What to do if the chain gets stuck during cutting?
Immediately release the switch. Activate the chain brake. Use a wedge to free the chain if necessary. Do not force.
How to sharpen the chain?
Use a round file suitable for the chain pitch. File each cutter from the inside out, at a constant angle (30°). Also file the depth gauges.
What safety precautions should I take?
Always wear gloves, safety glasses, ear protection, and snug clothing. Ensure the chain brake is working before each use.
How to replace the chain?
Loosen the guide bar nuts, remove the old chain. Place the new chain on the sprocket and in the guide bar groove. Adjust tension, then retighten.
Where can I buy spare parts for the FX-GS36S?
Spare parts (guide bar, chain, spark plug) are available from Fuxtec retailers, online or in hardware stores. Check compatibility with the model.
How to store the chainsaw in winter?
Empty the oil tank, clean the appliance, oil the chain, and store it in a dry, frost-free place. Unplug the power cord.
User questions about FX-GS36S Fuxtec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual FX-GS36S - Fuxtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FX-GS36S by Fuxtec.
USER MANUAL FX-GS36S Fuxtec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fuxtec
Model : FX-GS36S
Category : Uncategorized