FX-LS52 - Sweeper Fuxtec - Free user manual and instructions
Find the device manual for free FX-LS52 Fuxtec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Sweeper |
| Brand | Fuxtec |
| Model | FX-LS52 |
| Use | Indoor and outdoor on hard surfaces |
| Power Supply | Electric, corded |
| Power | Approximately 1200 W |
| Working Width | Approximately 30 cm |
| Tank Capacity | Approximately 1 L |
| Noise Level | Approximately 75 dB(A) |
| Weight | Approximately 5 kg |
| Dimensions (L x W x H) | Approximately 45 x 30 x 25 cm |
| Cable Length | Approximately 10 m |
| Main Functions | Wet and dry sweeping |
| Maintenance | Clean the filter regularly, empty the tank after use |
| Safety | Unplug before maintenance, do not immerse in water |
| Spare Parts | Available from the manufacturer |
| Warranty | 2 years |
Frequently Asked Questions - FX-LS52 Fuxtec
How to start the Fuxtec FX-LS52 sweeper?
Plug in the appliance, press the switch to turn it on. Use the trigger to spray water if necessary.
Can I use the sweeper on wooden floors?
Yes, adjust the water flow to avoid over-wetting the wood. Use dry mode for sensitive floors.
How to clean the filter of the FX-LS52?
Remove the tank, take out the filter and rinse it with clean water. Let it dry before reinstalling.
What to do if the sweeper does not spray water?
Check that the tank is filled and the trigger is activated. If the problem persists, clean the spray nozzles.
The sweeper makes an abnormal noise, what should I do?
Stop the appliance immediately. Check that no object is blocked in the brush. Contact customer service if the noise persists.
What type of detergent can I use?
Use a mild, non-foaming cleaning product specifically for sweepers. Avoid harsh solvents.
How to store the sweeper after use?
Empty the water tank, clean the brush and filter. Store in a dry place, protected from frost.
The sweeper does not suck well, why?
Check that the tank is not full, the filter is clean, and the brush is not worn. Replace if necessary.
Can I vacuum liquids with the FX-LS52?
Yes, the sweeper is designed for wet and dry cleaning. Be sure to empty the tank after vacuuming liquids.
Where to find spare parts for the FX-LS52 model?
Contact Fuxtec customer service or visit the official website. Parts such as brushes and filters are available.
User questions about FX-LS52 Fuxtec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sweeper in PDF format for free! Find your manual FX-LS52 - Fuxtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FX-LS52 by Fuxtec.
USER MANUAL FX-LS52 Fuxtec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fuxtec
Model : FX-LS52
Category : Sweeper