Zeus Evolution ZXE4000/1 - Receiver Hifonics - Free user manual and instructions
Find the device manual for free Zeus Evolution ZXE4000/1 Hifonics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Monoblock amplifier |
| Maximum power | 4000 W |
| RMS power (4Ω) | 1000 W x 1 |
| RMS power (2Ω) | 2000 W x 1 |
| RMS power (1Ω) | 4000 W x 1 |
| Amplifier class | Class D |
| Input impedance | 20 kΩ |
| Signal-to-noise ratio | > 90 dB |
| Total harmonic distortion (THD) | < 0.1% |
| Low-pass filter | Yes, from 50 to 250 Hz |
| Subsonic filter | Yes, from 15 to 40 Hz |
| High-level inputs | Yes |
| Low-level inputs (RCA) | Yes |
| Power supply | 12 V DC (10-16 V) |
| Dimensions (W x D x H) | 300 x 200 x 60 mm |
| Weight | 2.5 kg |
| Maintenance and cleaning | Clean with a dry cloth, do not use chemical products |
| Safety | Protection against short circuits, overheating, and overvoltage |
| Spare parts and repairability | Replaceable fuses, soldered components |
| General information | Brand: Hifonics, Model: Zeus Evolution ZXE4000/1 |
Frequently Asked Questions - Zeus Evolution ZXE4000/1 Hifonics
What is the actual power of the Zeus Evolution ZXE4000/1 amplifier?
The RMS power is 1000 W at 4 Ω, 2000 W at 2 Ω, and 4000 W at 1 Ω. The advertised maximum power is 4000 W.
How to connect the amplifier to a car stereo without RCA output?
Use the high-level inputs: connect the speaker wires from the car stereo to the high-level input connector of the amplifier.
What fuse size should I use?
It is recommended to use a 300 A fuse on the main power cable. Check the recommendations in the manual.
The amplifier gets very hot, is this normal?
Some heat is normal, but if it becomes very hot, check the ventilation and load impedance. The amplifier has thermal protection.
Can I use this amplifier with a 2-ohm subwoofer?
Yes, the amplifier is stable at 2 Ω and can deliver 2000 W RMS. Make sure the subwoofer can handle that power.
How to adjust the low-pass filter?
Turn the Low Pass potentiometer between 50 and 250 Hz according to your subwoofer's characteristics. A typical setting is around 80 Hz.
What power cable gauge should I use?
For an optimal installation, use a 4 AWG (21 mm²) cable or thicker to avoid voltage drops.
The amplifier does not turn on, what to do?
Check the power connections, the fuse, and the remote wire (REM). Make sure the battery voltage is correct.
Can I bridge this amplifier?
No, this amplifier is monoblock and cannot be bridged. It is designed to power a single subwoofer.
Where can I find spare parts?
Contact Hifonics customer service or an authorized dealer. Fuses are available in electronics stores.
User questions about Zeus Evolution ZXE4000/1 Hifonics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Zeus Evolution ZXE4000/1 - Hifonics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Zeus Evolution ZXE4000/1 by Hifonics.
USER MANUAL Zeus Evolution ZXE4000/1 Hifonics
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hifonics
Model : Zeus Evolution ZXE4000/1
Category : Receiver