Zeus Evolution ZXE2000/1 - Receiver Hifonics - Free user manual and instructions
Find the device manual for free Zeus Evolution ZXE2000/1 Hifonics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Amplified Receiver |
| Brand | Hifonics |
| Model | Zeus Evolution ZXE2000/1 |
| Amplifier Class | D |
| Number of Channels | 1 (monoblock) |
| RMS Power (4 Ω) | 1000 W |
| RMS Power (2 Ω) | 1500 W |
| RMS Power (1 Ω) | 2000 W |
| Frequency Response | 10 Hz - 250 Hz |
| Input Impedance | 20 kΩ |
| Signal-to-Noise Ratio | 91 dB |
| Total Harmonic Distortion | < 0.05% |
| Dimensions (L x W x H) | 355 x 195 x 55 mm |
| Net Weight | 3.6 kg |
| Power Supply | 12 V DC (vehicle) |
| Recommended External Fuse | 3 × 30 A |
| Low Pass Filter | 50 Hz - 250 Hz adjustable |
| Subsonic Filter | 15 Hz - 40 Hz adjustable |
| Phase Shifter | 0° / 180° |
| High Level Inputs | Yes |
| Low Level RCA Inputs | Yes |
| Built-in Protections | Short circuit, overheating, overvoltage |
| Cooling | Fan assisted |
Frequently Asked Questions - Zeus Evolution ZXE2000/1 Hifonics
What is the actual power of the ZXE2000/1?
The RMS power is 1000 W at 4 Ω, 1500 W at 2 Ω and 2000 W at 1 Ω. Maximum power may vary depending on installation.
Can I use this amp with a 12 V battery?
Yes, the required power supply is 12 V DC. Make sure the battery and alternator provide enough current (minimum 100 A recommended).
How to adjust the low pass filter?
Use the 'LPF' (Low Pass Filter) potentiometer to adjust the cutoff frequency between 50 Hz and 250 Hz. Turn clockwise to increase the frequency.
What to do if the amp does not turn on?
Check the external fuse, power cable connection and grounding. Make sure the remote wire (REM) receives 12 V when the car stereo is on.
The 'Protect' light is on, what to do?
This indicates active protection. Check for a short circuit on the speakers, too low impedance or overheating. Let it cool down and correct the issue.
What type of speaker can I connect?
This monoblock amplifier is designed for a subwoofer. The minimum load impedance is 1 Ω. Use a speaker with impedance between 1 and 4 Ω.
How to clean the device?
Disconnect the power. Use a dry, soft cloth. Do not use solvents or abrasive products. Avoid moisture.
Can I connect two subwoofers?
Yes, if the resulting impedance is at least 1 Ω. For example, two 2 Ω subwoofers in parallel give 1 Ω, which is acceptable.
What is the function of the subsonic filter?
The subsonic filter cuts very low frequencies (15-40 Hz) to protect the speaker from infrasound and save power.
Where to find the detailed wiring diagram?
The diagram is in the user manual. You can download it free from notice-facile.com.
User questions about Zeus Evolution ZXE2000/1 Hifonics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Zeus Evolution ZXE2000/1 - Hifonics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Zeus Evolution ZXE2000/1 by Hifonics.
USER MANUAL Zeus Evolution ZXE2000/1 Hifonics
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hifonics
Model : Zeus Evolution ZXE2000/1
Category : Receiver