Zeus Extreme ZXT1000/1 - Receiver Hifonics - Free user manual and instructions
Find the device manual for free Zeus Extreme ZXT1000/1 Hifonics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Model | Zeus Extreme ZXT1000/1 |
| Type | Monoblock Class D Amplifier |
| RMS Power (1 ohm) | 1000W x 1 |
| RMS Power (4 ohm) | 500W x 1 |
| Frequency Response | 10 Hz - 250 Hz |
| Input Sensitivity | 200 mV - 6 V |
| Low-Pass Crossover | 12 dB/octave, 35 Hz - 250 Hz |
| Bass Boost | 0 - 18 dB at 45 Hz |
| Subsonic Filter | 10 Hz - 40 Hz |
| Dimensions (W x H x D) | 12.6 x 2.2 x 9.4 inches |
| Weight | 5.5 lbs |
| Power Supply Voltage | 12 V DC (10-16 V) |
| Remote Control Included | Yes (wired bass remote) |
| Protection Circuits | Thermal, overcurrent, DC offset |
| Speaker Terminals | Dual 2/4 ohm compatible |
| Maintenance | Wipe with dry cloth; ensure ventilation; check connections monthly |
| Safety | Install in dry location; disconnect battery before work; avoid water exposure |
| Spare Parts Available | Fuses, remote control, mounting hardware |
| Certifications | CE, RoHS |
| Warranty | 1 year limited |
Frequently Asked Questions - Zeus Extreme ZXT1000/1 Hifonics
What is the power output of the Hifonics Zeus Extreme ZXT1000/1?
The amplifier delivers 1000W RMS at 1 ohm and 500W RMS at 4 ohm. It is a monoblock Class D design.
What is the recommended speaker impedance for this amplifier?
The ZXT1000/1 is stable down to 1 ohm. For optimal performance, use a subwoofer with a total impedance of 1 ohm or higher.
How do I connect the power wires?
Use a 4 AWG power cable for the main power supply. Connect the B+ terminal to battery positive via an inline fuse, GND to chassis ground, and REM to the head unit's remote turn-on wire.
What is the frequency response of the ZXT1000/1?
The frequency response is 10 Hz to 250 Hz, ideal for subwoofer applications. Use the low-pass crossover to limit higher frequencies.
How do I set the input sensitivity?
Turn the gain control clockwise to increase sensitivity. Use a digital multimeter or listen for distortion to avoid overdriving the amplifier.
Does the amplifier come with a remote control?
Yes, it includes a wired bass remote that allows you to adjust the subwoofer level from the driver's seat.
What protection features does the amplifier have?
It includes thermal, overcurrent, and DC offset protection. The amplifier will shut down automatically if a fault is detected.
Can I bridge this amplifier?
The ZXT1000/1 is a monoblock amplifier designed for a single output. Bridging is not applicable.
What is the recommended fuse size?
Use a 100A inline fuse on the power cable near the battery. Replace only with the same rating.
How do I clean and maintain the amplifier?
Wipe the exterior with a dry cloth. Ensure air vents are clear. Periodically check all connections for tightness.
User questions about Zeus Extreme ZXT1000/1 Hifonics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Zeus Extreme ZXT1000/1 - Hifonics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Zeus Extreme ZXT1000/1 by Hifonics.
USER MANUAL Zeus Extreme ZXT1000/1 Hifonics
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hifonics
Model : Zeus Extreme ZXT1000/1
Category : Receiver