FABER

The Chloe XL - Basket FABER - Free user manual and instructions

Find the device manual for free The Chloe XL FABER in PDF.

📄 112 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice FABER The Chloe XL - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product typeWall-mounted decorative hood
BrandFaber
ModelThe Chloe XL
Dimensions (W x D x H)90 cm x 50 cm x 60-105 cm (adjustable height)
WeightApproximately 18 kg
Power supply220-240 V ~ 50/60 Hz
Motor power280 W
Number of speeds3 + intensive
Max airflow650 m³/h
Max noise level65 dB(A)
Lighting2 x LED 3 W (removable)
Filter typeDishwasher-safe aluminum grease filters
Charcoal filterOptional (recirculation mode)
ControlsMechanical sliders
FunctionsExtraction/Recirculation, lighting, intensive speed
MaintenanceGrease filters every 2 months, charcoal filter every 4 months
CleaningClean exterior with a soft cloth and mild detergent
SafetyAutomatic shut-off after 24h (standby mode)
Spare partsFilters, LED bulbs, control knob
RepairabilityRepairability index 8.0/10 (according to manufacturer)
Warranty2 years parts and labor

Frequently Asked Questions - The Chloe XL FABER

What diameter of exhaust duct is required?
The recommended diameter is 150 mm. For optimal operation, use a smooth and rigid duct.
Is it necessary to install a charcoal filter?
This depends on the usage mode. In recirculation mode, the activated charcoal filter is essential to absorb odors. In extraction mode, it is not necessary.
How to clean the grease filters?
The aluminum grease filters can be cleaned in the dishwasher at 65°C or by hand with warm soapy water. Let them dry completely before reinstalling.
Are the LED bulbs replaceable?
Yes, the LED bulbs provide quality lighting. To replace them, order bulbs reference FABER LED 3W. Disconnect the appliance before any intervention.
Can the hood operate in recirculation mode without an external duct?
Yes, the The Chloe XL hood is convertible. You must install a recirculation kit (ref. FABER KR-90) containing a charcoal filter. The air will be filtered and then returned to the room.
How to adjust the suction speed?
Use the mechanical sliders on the front. Position 1: low (reduced noise), position 2: medium, position 3: high, intensive position (symbolized by a dedicated button): maximum power for 5 minutes.
What is the noise level at maximum speed?
The announced noise level is 65 dB(A) in intensive speed. At low speed, the noise drops to about 45 dB(A).
Is there an automatic shut-off?
Yes, the hood has an automatic shut-off function after 24 hours of continuous operation. This avoids unnecessary energy consumption.
How to install the hood between two cabinets?
The hood is installed between two kitchen cabinets. Ensure a spacing of 90 cm (width of the hood) and a height of 65-75 cm above the cooktop. Secure it firmly to the wall using the supplied wall plugs.
What to do if the hood does not turn on?
First check the power supply (plug and fuse). If the problem persists, inspect the bulbs (replace if burnt out). As a last resort, contact Faber after-sales service.

User questions about The Chloe XL FABER

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Basket in PDF format for free! Find your manual The Chloe XL - FABER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. The Chloe XL by FABER.

USER MANUAL The Chloe XL FABER

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : FABER

Model : The Chloe XL

Category : Basket