Glam Fit Soft - Basket FABER - Free user manual and instructions
Find the device manual for free Glam Fit Soft FABER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cooker Hood |
| Brand | Faber |
| Model | Glam Fit Soft |
| Dimensions (W x D x H) | 60 cm x 30 cm x 5-8 cm (motor unit) |
| Weight | Approx. 8 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Power Consumption | 150 W (motor) + 2 W (LED lighting) |
| Max Airflow (extraction) | 600 m³/h |
| Noise Level (max speed) | 65 dB(A) |
| Number of Speeds | 3 speeds + intensive boost |
| Controls | Electronic touch buttons |
| Lighting | LED strip, warm white |
| Filter Type | Aluminum grease filter (washable) + optional charcoal filter |
| Grease Filter Cleaning | Every 3 months in dishwasher or by hand |
| Charcoal Filter Replacement | Every 6 months |
| Installation Mode | Ducted (external exhaust) or recirculation (with carbon filter) |
| Mounted Type | Wall-mounted, under cabinet |
| Spare Parts | Grease filter, charcoal filter, LED module |
| Warranty | 2 years |
Frequently Asked Questions - Glam Fit Soft FABER
How do I install the Faber Glam Fit Soft hood?
Installation requires a wall mounting bracket. Ensure the hood is at least 65 cm above electric hobs and 75 cm above gas hobs. Follow the included template for drilling holes. For ducted mode, connect the exhaust pipe to the motor outlet. For recirculation, install the charcoal filters.
How often should I clean the grease filter?
Clean the aluminum grease filter every 3 months. You can wash it in a dishwasher (60°C) or by hand with mild detergent. Allow it to dry completely before reinserting.
How do I replace the charcoal filter?
The charcoal filter should be replaced every 6 months or when the odor removal performance decreases. Remove the grease filter, then click out the old charcoal filter and insert the new one. Make sure to lock it in place.
Can I use the hood without an external vent?
Yes, you can use it in recirculation mode. You will need to purchase the optional charcoal filter (not included). This mode cleans the air and recirculates it back into the kitchen.
What should I do if the hood is not turning on?
Check the power connection and fuse. Ensure the motor switch is set to 'I'. If the problem persists, there may be an internal fault. Consult a qualified technician.
How do I adjust the speed?
Use the touch buttons on the control panel. The speed levels are indicated by symbols: one line for low, two for medium, three for high, and a 'P' for intensive boost. Boost runs for 10 minutes then returns to high.
What type of bulbs does the hood use?
The hood uses integrated LED lighting. If it fails, the entire LED module must be replaced. Contact Faber service for a replacement module.
Is the hood noisy?
The noise level ranges from 45 dB (low speed) to 65 dB (boost). This is normal for a powerful hood. Ensure the hood is properly mounted to reduce vibration noise.
Can I use the hood with a gas hob?
Yes, but maintain a minimum height of 75 cm between the hob and the hood. The hood's materials are fire-resistant and comply with safety standards.
Where can I find spare parts for the Glam Fit Soft?
Spare parts such as grease filters, charcoal filters, and LED modules are available on Faber's official website or through authorized dealers. Use the model number 'Glam Fit Soft' to find compatible parts.
User questions about Glam Fit Soft FABER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual Glam Fit Soft - FABER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Glam Fit Soft by FABER.
USER MANUAL Glam Fit Soft FABER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FABER
Model : Glam Fit Soft
Category : Basket