The High-Light 2.0 - Range hood FABER - Free user manual and instructions

Product Type	Wall-mounted decorative hood
Brand	Faber
Model	The High-Light 2.0
Dimensions (W x D x H)	90 x 50 x 60 cm (varies by version)
Weight	Approximately 25 kg
Power supply	220-240 V / 50 Hz
Motor power	250 W
Maximum airflow	650 m³/h
Maximum noise level	65 dB(A)
Lighting type	High-brightness LED (3 levels)
Number of speeds	4 + intensive
Control type	Touch or remote control (depending on version)
Grease filter	Dishwasher-safe metal filters
Carbon filter (optional)	Activated carbon filter for recirculation
Main functions	Extraction, LED lighting, timer, heat detection
Maintenance and cleaning	Clean grease filters every month; wipe exterior with a soft cloth
Safety	Automatic shutdown, overheat protection
Spare parts and repairability	Available from Faber after-sales service
General information	2-year warranty; Made in Italy

Frequently Asked Questions - The High-Light 2.0 FABER

How to clean the grease filters of the Faber The High-Light 2.0 hood?

The metal filters are dishwasher-safe. Remove them, wash at 55°C, dry, and put them back. Clean them every month for optimal performance.

How to replace the carbon filter?

The carbon filter is optional for recirculation mode. It should be replaced every 3 to 6 months depending on usage. Remove the panel, unclip the old filter and insert the new one.

The remote control no longer works, what to do?

Check the batteries of the remote control. If the problem persists, reset the hood by cutting the power for 10 seconds. If this does not work, contact customer service.

How to set the timer on the hood?

Press the timer button (clock) and select the desired duration (1 to 15 minutes). The hood will turn off automatically after this time.

The hood makes an abnormal noise, what should I check?

Check that the filters are properly in place and clean. Make sure nothing is blocking the air outlet. If the noise persists, contact a technician.

How to change the LED bulb of the hood?

The LEDs are integrated and cannot be changed individually. In case of failure, contact customer service for module replacement.

What is the minimum distance between the hood and the cooking plate?

For electric plates, the minimum distance is 65 cm; for gas, 75 cm. Respect these values for optimal safety.

The hood does not turn on, what to do?

Check that the hood is properly plugged in and that the circuit breaker has not tripped. Test another outlet if possible. If nothing works, call a professional.

How to activate the intensive function?

Press the 'Boost' or 'Intensive' button. The hood operates at full power for 10 minutes then returns to the previous speed.

Where to find the complete user manual?

The manual is available for free download on the website notice-facile.com. Search for 'Faber The High-Light 2.0 manual' to access it.

USER MANUAL The High-Light 2.0 FABER

LV 83

LT 88

HU 93

MK 98

AL 104

SR 109

PT 114

SV 120

FI 125

UK 130

DA 136

AR 141

EN

1. SAFETY INFORMATION

For your own safety and to ensure proper operation of the appliance, please read this manual carefully before installation and operation. Keep these instructions together with the appliance, even if it is sold or transferred to third parties. It is important that users know all the appliance's operating and safety characteristics.

The cables must be connected by a trained technician.

• The manufacturer shall not be considered responsible for any injury or damage caused by improper installation or use.
• The minimum safety distance between the hob and the suction hood is 650 mm (some models may be fitted at a lower height; please see the paragraph relating to working dimensions and installation).
• If the instructions for installation of the gas hob specify a distance greater than the one indicated, this must be taken into account.
• Check that the mains power supply corresponds to the one indicated on the data plate affixed inside the hood.
• The cut-out devices must be installed in the fixed system according to wiring system

regulations.

• For Class I appliances, check that the domestic power supply is adequately earthed.
• Connect the hood to the flue using a pipe with a minimum diameter of 120 mm. The fumes must travel the shortest distance possible.
• All the air venting regulations must be complied with.
• Do not connect the ducting hood to flues that also carry combustion fumes (e.g. boilers, chimneys, etc.).
• If the hood is used in combination with non electric appliances (e.g. gas appliances), a sufficient level of ventilation must be guaranteed in the room to prevent any exhaust backflow. If the kitchen hood is used in combination with appliances that are not electrically powered, the negative pressure in the room must not exceed 0.04 mbar to avoid any risk of the fumes being sucked back into the room by the hood.
• The air must not be extracted through a flue that is also used as an exhaust flue for fumes from gas or other fuel powered combustion devices.
• If it is damaged, the power cable must be replaced by the manufacturer or by a service technician.
• Connect the plug to a socket that complies with current regulations and is in an accessible position.

- As regards the technical and safety measures to be taken for exhausting fumes, it is important that the regulations set by local authorities be complied with scrupulously.

CAUTION: remove the protective films before installing the hood.

- Only use screws and hardware of a sort suitable for the hood.

CAUTION: failure to install the screws or fixing devices as described in these instructions may mean there is a risk of electric shocks.

- Do not look directly at the light through optical devices (binoculars, magnifying glasses...).

- Do not flambé food under the hood: you might cause a fire.

- This appliance may be used by children over the age of 8 years and by persons with limited psycho-physical and sensory abilities or with insufficient experience and knowledge, provided they are carefully supervised and instructed on how to use the appliance safely and on the dangers that it involves. Make sure that children are not allowed to play with the appliance. Cleaning and maintenance to be performed by the user must not be carried out by children, unless they are under supervision.

- Supervise children to make

sure they do not play with the appliance.

- The appliance must not be used by persons (including children) with limited psycho-physical or sensory capacities or with insufficient experience and knowledge, unless they are carefully supervised and instructed.

Accessible parts may become extremely hot during the use of cooking appliances

- Clean and/or replace the filters after the period of time indicated (danger of fire). See the paragraph on Maintenance and cleaning.

- The room must be adequately ventilated when the hood is used simultaneously with appliances that use gas or other fuels (not applicable to appliances that only discharge air into the room).

- The symbol ⚡ on the product or on its packaging indicates that the product must not be disposed of with the normal domestic waste. The product must be disposed of at a specialist recycling centre for electrical and electronic components. By making sure that this product is disposed of properly, you will help prevent possible negative consequences for the environment and for health that might result from its improper disposal. For more detailed information on how to recycle

this product, please contact your local municipal offices, local waste disposal service or the shop in which the product was purchased.

Declaration of Conformity

The manufacturer declares that this appliance with K-Link + Wi-Fi radio functionality complies with Directive 2014/53/EU.

The complete text of the EU declaration of conformity is available at the following link by searching for the product code:

https://www.faberspa.com/en/product-documentation/

This code can be found on the label located inside the product.

Fre-quency bands	Maximum transmit-ted power
2.4 GHz 100 mW max.
5 GHz 100 mW max.

2. USE

• The suction hood has been designed exclusively for domestic use, to eliminate kitchen odours.
• Never use the hood for purposes other than those for which it was designed.
• Never leave high flames under the hood when it is in operation.
• Adjust the intensity of the flame so that it is directed onto the bottom of the cooking pan, making sure it does not wrap around the sides.
• Deep-fryers must be kept under constant supervision when in use: the oil may catch fire if it gets too hot.

3. CLEANING AND MAINTENANCE

- The sponge-like part of the filter can be washed in the dishwasher at least once every 4 months, or more frequently if use is particularly intense. Operation is guaranteed for up to a maximum of 5 washes, after which it must be replaced (W).

- The grease filters must be cleaned every 2 months of operation, or more frequently in the case of particularly intensive use. They can be washed in a dishwasher (Z).

• Clean the hood using a damp cloth and neutral liquid detergent.
• Avoid using alcohol or silicone-based products to clean the inside and outside of the cooker hood.

4. CONTROLS

H7Z7
Key Key pressing	Function LED
L Short The lights alter	mate between high intensity, medium intensity (if present) and off.If there is an induction hob coupled to the hood, if the hood is off, as soon as the induction hob is switched on, the hood lights are switched on at maximum intensity.	-
Long with light or motor on	Delay FunctionIt activates/deactivates the Delay function (automatic shutdown of the Motor and function of lighting delayed by 30').Cannot be activated with Intensive or 24h on.	Flashing
Long with all loads off (motor and lights)	K-Link pairingBefore starting the procedure, follow the specific instructions in the manuals of the devices to be paired.The procedure for pairing the hood with K-Link compatible device (induction hob or remote control) starts. Up to 3 induction hobs and a single remote control can be associated. Reference should be made to the manual of the devices for the operations that must be performed on these.The pairing process takes 2 minutes. If no device is recognised within this time, check that the procedure for the devices to be paired has previously been started. It is possible that the maximum limit of associable devices has been reached.	LED T1 and T2 flashing: pairing procedure in progress.Upon successful completion of the procedure, LEDs T1 and T2 are switched on for 2 seconds.
T1 Short Turns the motor	on/off at the first speed. Fixed
Long with light on	Activates/Deactivates the Activated Carbon Filters alarm.	All the LEDs flash twice: alarm activated.All LEDs on for 1 second: alarm deactivated.
Long with all loads off (motor and lights)	K-Link DepairingThe procedure for deleting all K-Link compatible devices previously associated with the K-Link Pairing function starts.	Upon successful completion of the procedure, LEDs T1 and T2 flash 5 times.
T2 Short Turns the motor	on/off at the second speed. Fixed
Long with light or motor on	24h functionActivates/deactivates the motor in 24h Air Exchange mode, a speed that allows suction of 10 minutes every hour, for a 24-hour cycle.It cannot be activated if the Intensive or Delay mode is active.	Flashing
T3 Short Turns the motor on at the third speed. Fixed
			Long with light or motor onTurns the motor on at the Intensive speed.This speed is timed for 6 minutes. At the end of the time, the system automatically returns to the previously selected speed. If activated with the motor off, once the time has elapsed, it switches to OFF mode.
			Long with all loads off (motor and lights)The Filter saturation alarm is reset. All the LEDs flash three times.
			Signals the Metal Grease Filters saturation alarm and the need to wash them. The alarm goes into operation after 100 hours of actual hood work.
			Signals the Activated Charcoal Odour Filter saturation alarm. The alarm goes into operation after 200 hours of actual hood work.
T4 Short AUTO Mode			Activates/deactivates the Automatic operating mode.Each time other keys are pressed, the AUTO mode is deactivated.The AUTO mode is activated by pressing the button or when the Paired Induction Hob is turned on. The hood speed will be set automatically using the highest power level present on the hob zones. When the induction hob is switched off, the last speed implemented is maintained for 5 seconds and then speed 1 for 15 minutes. At the end of the 15 minutes the motor is switched off. The state of the lights is not changed.
			Long with light on and motor offInduction/Gas Hob SelectionSelect the type of hob in use, either Induction or Gas.The Induction Hob type is set by default.
Recommended pairing sequence between devices:1 - K-Link mode (See remote control manual)2 - K-Link pairing (See hood manual)3 - Remote control-hood pairing (See remote control manual)4 - K-Link pairing (See hood manual)5 - Hob-Hood pairing (See induction hob manual)			1 Flash: confirms Induction Hob selection.2 flashes: confirms Gas Hob selection.

5. REMOTE CONTROL

• This appliance can be controlled using a remote control.
• ATTENTION: before proceeding, activate K-Link Mode on the remote control (see the device manual for further details).

6. LIGHTING

- Please contact the Service Department to change it ("Please contact the service department to purchase it").

1. SAFETY INFORMATION

This code is on the label placed inside the product.

Frekven-cijski op-sezi	Maksimalna emiti-rana snaga
2,4 GHz 100 mW maks.
5 GHz 100 mW maks.

2. USE

The product code is on the label inside the product.

https://www.faberspa.com/en/product-documentation/

https://www.faberspa.com/en/product-documentation/

• whose Capital Privacy Policy for the EU must be on the European Internet. Environment: Millennials code: https://

www.faberspa.com/en/product-documentation

and neutral liquid detergent.