HB 10-L - Saw Cocraft - Free user manual and instructions
Find the device manual for free HB 10-L Cocraft in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Jigsaw |
| Brand | Cocraft |
| Model | HB 10-L |
| Power Supply | 230 V AC, 50 Hz |
| Power Consumption | 650 W |
| No-Load Speed | 500 – 3100 rpm (variable) |
| Stroke Length | 20 mm |
| Cutting Capacity in Wood | 100 mm |
| Cutting Capacity in Steel | 10 mm |
| Cutting Capacity in Aluminum | 20 mm |
| Bevel Cut Range | 0° – 45° |
| Dust Extraction Adapter | 36 mm |
| Weight | 2.3 kg |
| Dimensions (L x W x H) | 250 x 80 x 200 mm |
| Pendulum Action | 4-stage |
| Blade Type | T-shank |
| Quick Release Blade Change | Yes |
| Soft Grip Handle | Yes |
| Laser Guide | No |
| Operating Mode | Variable speed trigger |
| Protection Class | II |
| Cable Length | 2 m |
| Safety Features | Blade guard, lock-off button |
| Maintenance | Clean ventilation slots, lubricate gear |
| Spare Parts Available | Blades, base plate, carbon brushes |
Frequently Asked Questions - HB 10-L Cocraft
How do I change the blade on my Cocraft HB 10-L jigsaw?
First, unplug the saw. Use the quick-release lever to open the blade clamp. Insert the new T-shank blade with the teeth facing forward, then close the lever until it clicks. Ensure the blade is secure before use.
What materials can I cut with the HB 10-L?
This jigsaw is designed for cutting wood (up to 100 mm), plastics, and metal (steel up to 10 mm, aluminum up to 20 mm). Use appropriate blades for each material.
How do I perform a bevel cut?
Loosen the bevel adjustment screw on the base plate. Tilt the base to the desired angle (0° to 45°) and retighten the screw. Make sure the blade clearance is adjusted accordingly.
Why does my jigsaw vibrate excessively?
Excessive vibration can be due to a dull or damaged blade, incorrect blade type, or loose blade clamp. Check the blade condition and ensure it is properly installed. Also, verify that the workpiece is firmly secured.
Can I use the jigsaw with a dust extractor?
Yes, the HB 10-L has a 36 mm dust extraction adapter. Connect your vacuum hose to the port to minimize dust during operation. Ensure the vacuum is rated for fine dust.
What speed setting should I use for different materials?
For soft materials like wood, use high speed (near 3100 rpm). For metals or plastics, use lower speeds (around 1500-2000 rpm) to prevent overheating. Adjust using the variable speed trigger.
How do I clean and maintain the jigsaw?
Regularly remove dust from ventilation slots using a brush or compressed air. Lubricate the gear housing occasionally with lithium grease. Inspect the power cord for damage and store in a dry place.
What safety precautions should I take?
Always wear safety glasses, hearing protection, and a dust mask. Keep hands away from the cutting path. Use the lock-off button when not in use and unplug before changing blades or cleaning.
Where can I buy spare parts for the HB 10-L?
Spare parts such as blades, base plates, and carbon brushes are available through the Cocraft website or authorized retailers. Use only genuine parts to ensure compatibility and safety.
Why does the blade stop during cutting?
This could be due to overheating protection, a tripped circuit breaker, or a worn carbon brush. Allow the tool to cool down, check the power supply, and inspect the brushes. If needed, replace brushes.
User questions about HB 10-L Cocraft
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual HB 10-L - Cocraft and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HB 10-L by Cocraft.
USER MANUAL HB 10-L Cocraft
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Cocraft
Model : HB 10-L
Category : Saw