GA-880G-USB3 - Motherboard GIGABYTE - Free user manual and instructions

Product type	Desktop PC motherboard
Brand	GIGABYTE
Model	GA-880G-USB3
CPU Socket	AM3+ (compatible with AMD Phenom II, Athlon II, Sempron processors)
Chipset	AMD 880G + SB710
Memory type	DDR3, up to 16 GB, two slots
Supported memory frequency	DDR3 1333/1066 MHz
Expansion slots	1 x PCI Express 2.0 x16, 2 x PCI Express 2.0 x1, 2 x PCI
Storage	5 x SATA 3Gb/s, 1 x IDE (ATA-133)
USB	2 x USB 3.0 (rear), 8 x USB 2.0 (including 4 front panel)
Audio	Realtek ALC887 codec, 8-channel HD audio
Network	Realtek RTL8111DL, Gigabit Ethernet
Dimensions	Standard ATX form factor (305 x 244 mm)
Approximate weight	0.9 kg
Required power supply	24-pin ATX connector + 4/8-pin CPU connector
Key features	Dual Channel DDR3 support, USB 3.0, SATA 3Gb/s, PCI Express 2.0, HD audio, Gigabit Ethernet
Care and cleaning	Disconnect before cleaning, use a soft dry cloth, avoid liquid products
Safety	Disconnect power before installation/removal, handle with care to avoid electrostatic discharge
Spare parts and repairability	Available on GIGABYTE website; the motherboard contains no user-serviceable parts
General information	3-year manufacturer warranty, technical support available online

Frequently Asked Questions - GA-880G-USB3 GIGABYTE

What type of processor is compatible with the GA-880G-USB3?

The motherboard supports AMD socket AM3+ processors (Phenom II, Athlon II, Sempron). Check compatibility on the GIGABYTE website.

How to install RAM memory?

Open the clips of the DDR3 slots, align the module notch with the key, then press firmly until the clips close automatically. Preferably use two identical modules for Dual Channel mode.

How many PCI Express slots are available?

The board has one PCI Express 2.0 x16 slot (for graphics card), two PCI Express 2.0 x1 slots, and two classic PCI slots.

How to connect the front panel of the case?

Connect the cables (Power, Reset, LED, HDD LED, speaker) to the F_PANEL connector located at the bottom right of the board. Refer to the manual diagram for pin assignment.

What type of power connector is required?

The motherboard requires a main 24-pin ATX connector and a 4-pin (or 8-pin) CPU connector for processor power.

Does the motherboard support USB 3.0?

Yes, it has two USB 3.0 ports on the back (blue) and internal headers for front panel USB 3.0 ports, offering speeds up to 5 Gbps.

How to update the BIOS?

Download the latest BIOS version from the GIGABYTE website, copy it to a USB flash drive, then use the built-in Q-Flash utility (accessible at boot by pressing the End key).

What operating systems are compatible?

The motherboard is compatible with Windows 7, Windows 8/8.1, and Windows 10 (64-bit mode). Drivers are available on the GIGABYTE website.

How to troubleshoot a boot problem?

Check power connections, proper insertion of RAM and CPU. Try booting with a single memory module. Reset the BIOS by removing the button cell battery for a few seconds.

Where to find the complete user manual?

The manual is available in PDF format on notice-facile.com or on the official GIGABYTE website in the support section for your model.

USER MANUAL GA-880G-USB3 GIGABYTE

The sequence of installation may differ depending on the type of case and devices used. The installation instructions below apply to GIGABYTE's desktop systems and are for reference only.
Refer to the user's manual included for detailed motherboard specifications.
- Before installing the devices, make sure they are compliant with the connectors on your computer.
- Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices and the system components.
- Place the computer system on a stable surface to prevent improper installation resulted from shaking.

Installing a CPU and CPU Cooler

A. Installing an Intel CPU (skip this step if the motherboard has a built-in CPU)

A-1 Refer to the following instructions based on your CPU specifications:

• Type A:

Lift the CPU socket lever and the metal load plate will be lifted as well.

a. If the protective socket cover is fastened on the CPU socket, remove it first.
b. If the protective socket cover is fastened on the metal load plate, do not remove it at this stage. The socket cover may pop off from the load plate automatically during the process of re-engaging the lever after you insert the CPU.

• Type B:

Push lever A (closest to the "□" marking) down and away from the socket to release it. Then push lever B (closest to the "□" marking) down and away from the socket and lift it. Gently press lever A to allow the load plate to rise. Open the load plate.

A-2 Hold the CPU with your thumb and index fingers. Align the CPU pin one marking (triangle) with the pin one corner of the CPU socket (or you may align the CPU notches with the socket alignment keys) and gently insert the CPU into position.
A-3 Once the CPU is properly inserted, replace the load plate and push the CPU socket lever back into its locked position. Once the type B is properly inserted, carefully replace the load plate. Then secure lever B under its retention tab. The socket cover may pop off from the load plate during the process of engaging the lever. Finally, secure lever A under its retention tab to complete the installation of the CPU.

For detailed instructions on installing the CPU, please refer to the user's manual.

B. Installing an AMD CPU (skip this step if the motherboard has a built-in CPU)

B-1 Completely raise the CPU socket lever. Align the CPU pin one (small triangle marking) with the triangle marking on the CPU socket and gently insert the CPU into the socket. Make sure that the CPU pins fit perfectly into their holes.
B-2 Once the CPU is positioned into its socket, place one finger down on the middle of the CPU, lowering the socket lever and latching it into the fully locked position.

• Do not force the CPU into the CPU socket. The CPU cannot fit in if oriented incorrectly. Adjust the CPU orientation if this occurs.
• DO NOT touch socket contacts. To protect the CPU socket, always replace the protective socket cover when the CPU is not installed.

C. Installing the CPU cooler

C-1 Before installing the CPU cooler, please first add a thin layer of heat sink paste on the surface of the CPU. Then install the cooler (refer to the installation manual for your CPU cooler).
C-2 Connect the CPU cooler cable to the CPU_FAN connector located on the motherboard so that the cooler can properly function to prevent the CPU from overheating.

Installing Memory

Note the orientation of the memory module. Spread the retaining clips at both ends of the memory socket. Place the memory module on the socket. As indicated in the picture on the left, place your fingers on the top edge of the memory, push down on the memory and insert it vertically into the memory socket. The clips at both ends of the socket will snap into place when the memory module is securely inserted.

Preparing the Case and Installing a Power Supply

Using the GIGABYTE desktop system as the demonstration example, please first remove both sides and the lid of the case in order to install the power supply. Place the power supply in the correct place in the case and secure it with screws. Installation and placement of the power supply may differ depending on the type of case used.

To ensure sufficient power can be supplied to your system, it is recommended that a power supply of good quality be used. If a power supply is used that does not provide the required power, the result can lead to an unstable or unbootable system.

Step

4

Installing the Motherboard

Remove the original I/O shield from the back of the case and replace it with the motherboard I/O shield. Place the motherboard within the case by positioning it into its I/O shield. Align the mounting screw holes on the motherboard with their corresponding mounting holes on the case. Secure the motherboard in place with screws.

I/O Shield

Step

5

Installing an Expansion Card

PCI Express Graphics Card

Locate an expansion slot that supports your card and remove the slot cover from the case back panel. Then insert the expansion card into the slot. Secure the expansion card's bracket to the case back panel with a screw.

• Before purchasing an expansion card, check the length of the card, making sure it can fit into your case.
• Make sure that the expansion card is fully seated in its slot.

Step

6

Installing IDE and SATA Devices

Installing an Optical Drive

6-1 Install your optical drives, such as DVD-ROM and CD-ROM drives.

Remove the 5.25" drive bay cover from the front of the case. Mount the optical drive in the 5.25" drive bay and secure it with screws.

Installing a Hard Drive

6-2 Install your IDE and SATA hard drives.

Install the hard drive into a drive bay within the case and secure it with screws.

• One motherboard IDE connector can connect up to two IDE devices. Prior to installation, check the jumper settings (master and slave) on your IDE devices.
• If more than one hard drive is installed, enter system BIOS Setup to set the hard drive boot sequence.

Connecting Cables to Internal Connectors

7-1 Connect cables to internal connectors and headers on the motherboard, including IDE/SATA connectors, and front panel audio, USB, IEEE 1394 headers, etc.
7-2 Attach the front panel module (differs depending on the case design, consisting of power indicator, hard drive activity indicator, speakers, reset switch, power switch, etc.) from the case to the front panel header (F PANEL) on the motherboard.

Front Panel Header

Pin Assignments A:

Pin Assignments B:
MSG: Message/Power/Sleep LED

PWR: Power LED

PW: Power Switch

SPEAK:Speaker

HD: Hard Drive Activity LED

RES: Reset Switch

Cl: Chassis Intrusion Header

(Note) The pin assignments for the front panel header may differ by model. Refer to the motherboard user's manual for the actual pin assignments.

Connecting Peripherals

Back Panel of the Case

Once the steps above have been completed, connect the peripheral devices to the computer, such as the keyboard, mouse, monitor, etc. Then connect the power, turn on the system, and install all required software.

Conector do paine frontal

YctaHOBka CNCTeMHoN PJIaTbI

CnHmnte 3aIyUkPy pa3bEmOB BBOda/BbIBOda Ha 3aIeHne HaneHn Kopnyca n yCTAHOBITE Ha ee MeTO NaHEnb pa3bEmOB BBOda/BbIBOda nKOMNIJEKTa noCTABKN CNTeMHNO nPaTbI. YCTAHOBITE CNTeMHYIO nPATEB KOPnyce, COBMecTINB pa3bEmbl Ha 3aIeHne HaneHn CNCTeMHNO nPATE C OTBepCTNAMn H aNaHEn BBOda/BbIBOda. COBMecTIne KpeENXhIE OTBepCTNcNTeMHNO nPATAc COoTBETCTByUQIMn OTBepCTNAMn Kopnyca. 3akpenite CNTeMHYIO nPATAy B Kopnyce PIK c NOMOuBvHTOB.

3aŋnyuka pa3bEmOB BBOda/BbBOda

YctaHOBka pnaTbI paCwnpeHnra

RES: Khoonka nepe3aqrty3kn

Cl:ДатчИВСКРБITЯКОр顺序CA

(Приимеане) PaCNoIOnOKeHne KOtAeTbP a3bema nepdHe naneHn dIpa3aJIuNbIX MoJeNe I nIaT MoKet pa3nHaTcBc. Ha3NaueHne KOtAeTbP pa3bema F_PANEL npBBeHcO B PykoBoDCTBe NOJb3OBaTeI CNCTeMHo I nIaTbl.

PoiKlIouHne nepuΦepnHbIX ycTpoiCTB

PacnoJoxeHne pa3bemOB Ha 3aDnei naHei

BbIOnHnB Bce nepeuucnHhIe DeIcTBn, nOKnIOUHTe K KOMNbIoTepy nepuΦepuHbIe yCTPOICTBa:KnabNAtpy, Mblb, MOHITOp nT.I. POnKIOUHTe BnIKy CInOBoro Ka6eJIa B cTeByIO po3ETky, BKNIOHTe PIk uYctAHOBtE Heo6xOIMoe npOrpAMMHOe ObecneHHe.

Adum Bellegin Kurulumu

Push lever A (closest to the "□" marking) down and away from the socket to release it. Then push lever B (closest to the "□" marking) down and away from the socket and lift it. Gently press lever A to allow the load plate to rise. Open the load plate.

A-2 Hold the CPU with your thumb and index fingers. Align the CPU pin one marking (triangle) with the pin one corner of the CPU socket (or you may align the CPU notches with the socket alignment keys) and gently insert the CPU into position.
A-3 O data ce CPU-ul este introdus corect, asezati din nou placuţa de metal si impingeti bratul sociului de CPU inapo in positia blocata.

PWR: LED pornography

PW: Intrerupator de alimentare

SPEAK: Difuzor

HD:LED activate hard disk

RES: Intrerupator de reinitializare

(wnnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn

ywnn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn

.

n, Tyn n nnynnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

n nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn nnnn nn

.

n nn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

Taynn npn .

y nnnn nn nnnn nn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nn

PCN PNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN N

1-

#

2

y

nD 790 nnnn nn

3

n nn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nni nnnn nn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn

.

.9nnn nn nnnn nn nnnn nn nnnn nn nnnn

wannnnn nn nnnn nn nnnnnnnnnnnnnnn

n nn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nynnnnnnn

n nn nnnnnnnnnnnnnnnnnnnnnnnnnnnnn

NOTE

Taynn TAYNN

(wnnnn nn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

1

:A10

n nn nnnnnnnnnnnnnnnnnnnnnnn

nnnnn nn, nnnnnnnnnnnnnnnnnnnnnnn a.

a n i n 10n ,nnonnn onnn nn pnn npnn nnn a b.

ywn nn nnnn nn nnnn nn nnnn nn nn nn nn nn

TNNNOONN

:Bao

Bn nnnn nn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

.ynnnn nnnpnnnny

n nn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

B 1000000000000000000000000000000000000000000000000000000

.ynnnn

wnnnn nn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn