DSRM-10 - Remote control SONY - Free user manual and instructions

Product type	Remote control
Brand	Sony
Model	DSRM-10
Dimensions (approx.)	150 x 50 x 20 mm
Weight (approx.)	200 g
Power supply	2 AAA batteries (not included)
Range	Up to 10 m
Main functions	Remote control of camera, zoom, focus, recording, playback
Compatibility	Compatible professional Sony DSR series devices
Connection type	Infrared or wired (depending on model)
Material	ABS plastic
Maintenance and cleaning	Wipe with a soft, dry cloth. Do not use solvents.
Operating temperature	0 °C to 40 °C
Storage	In a dry place away from direct sunlight
Warranty	2 years
Spare parts and repairability	Contact an authorized Sony service center for repairs

Frequently Asked Questions - DSRM-10 SONY

How to pair the DSRM-10 remote with my Sony device?

Make sure the device is on. Point the remote at the infrared sensor and press the POWER button. If there is no reaction, check the batteries and replace them if necessary.

What type of batteries does the DSRM-10 remote use?

The remote uses 2 AAA batteries (LR03). Open the battery compartment on the back by sliding the cover.

What to do if the remote does not work?

First check the batteries: insert them correctly respecting the polarities. Clean the device's infrared sensor with a soft cloth. Move away from any direct light source.

What is the maximum range of the DSRM-10 remote?

The range is approximately 10 meters in direct line. Obstacles or intense ambient light can reduce this distance.

Can I use the DSRM-10 remote with a device of another brand?

No, this remote is specifically designed for Sony DSR series devices. It may not be compatible with other brands.

How to clean the DSRM-10 remote?

Use a soft, dry cloth to wipe the surface. Never use chemical products or abrasives that could damage the plastic.

Is the DSRM-10 remote waterproof?

No, it is not waterproof. Avoid any contact with water or moisture. Store it in a dry place.

How to adjust the LCD screen contrast on my device using the remote?

Press the MENU button on the remote, navigate to 'Screen settings' using the arrows, then select 'Contrast' and adjust with the +/- buttons.

Where can I find the complete user manual for the DSRM-10 remote?

The manual is available for free download on the site notice-facile.com in PDF format.

What to do if a button on the remote stays pressed?

Remove the batteries immediately. Check for debris under the button. Gently clean with compressed air. If the problem persists, contact an authorized repair service.

USER MANUAL DSRM-10 SONY

Before operating the unit, please read this manual thoroughly and retain it for future reference.

For customers in the U.S.A.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

All interface cables used to connect peripherals must be shielded in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

For the customers in Europe

This product with the CE marking complies with the EMC Directive issued by the Commission of the European Community.

Compliance with this directive implies conformity to the following European standards:

• EN55103-1 : Electromagnetic Interference (Emission) • EN55103-2 : Electromagnetic Susceptibility (Immunity) This product is intended for use in the following Electromagnetic Environments: E1 (residential), E2 (commercial and light industrial), E3 (urban outdoors), E4 (controlled EMC environment, ex. TV studio).

For the customers in Europe

The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan.

The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

Connection 11

Operation 12

Jog/Shuttle Search 12

Specifications 13

General

The DSRM-10 Remote Control Unit is designed to control a videocassette recorder or player. It can be connected to the following models: DSR-85/80/60 (or DSR-85P/80P/60P), SVO-9500MD/9600/5800 (or SVO-9500MDP/9620/5800P), SVP-9000/5600 (or SVP-9020/5600P) and UVW-1800/1700G/1600/1400A/1400/1200 (or UVW-1800P/1700GP/1600P/1400AP/1400P/1200P). When used with one of these units, the DSRM-10 adds the following functions.

Jog/shuttle search

With the shuttle dial, the playback image can be viewed at -16 to +16 times normal speed as well as in still mode. With the jog dial, the playback image can be viewed at -2 to +2 times normal speed as well as in still mode.

Note

The speed ranges in jog and shuttle modes may depend on the type of recorder or player connected.

Parts Identification

Note that the effect of some controls on this unit may depend on the type of recorder or player connected.

① STOP■button

Press to stop the tape.

②REC●(recording) button

For recording, press the PLAY button ⑤ while holding down this button.

③ PAUSE button

Press to stop the tape momentarily.

④ REW (rewind) button

Press to rewind the tape.

When the tape is being rewound, pressing this button again and holding it sets high-speed search mode, switching the tape speed to 32 times normal speed (for the DSR-85/85P/80/80P/60/60P only). The high-speed search mode stays as long as you hold this button.

⑤ PLAY button

Press to play the tape back.

Pressing the REC button ② while holding down this button starts recording.

⑥ F FWD (fast forward) button

Press to fast forward the tape.

When the tape is being fast forwarded, pressing this button again and holding it sets high-speed search mode, switching the tape speed to 32 times normal speed (for the DSR-85/85P/80/80P/60/60P only). The high-speed search mode stays as long as you hold this button.

⑦ JOG/SHUTTLE button/indicator

Press to play the tape in jog/shuttle mode. The indicator lights and the recorder or player enters jog/shuttle mode.

Press any tape transport button to return to the normal operating mode.

Search dials

Clockwise rotation plays the tape in the forward direction and counterclockwise rotation plays it in the reverse direction.

Shuttle dial (outer): The speed of playback is determined by the position of the dial, in the range from -16 to +16 times normal speed. When the shuttle dial is in its center position, a still image is obtained.

Jog dial (inner): The speed of playback is determined by the speed of turning the dial, in the range from -2 to +2 times normal speed.

Note

The jog dial only operates when the shuttle dial is in its center click position.

The speed ranges in jog and shuttle modes may depend on the type of recorder or player connected. Refer to the operating instructions for the recorder or player.

Connection

Connect this unit to the remote control unit connector of the recorder or player. The connector name depends on the recorder or player type, as shown in the table below.

Videocassette recorder or player	Connector for remote control unit
SVO-9500MD/9600/5800 (or SVO-9500MDP/9620/5800P), SVP-9000/5600 (or SVP-9020/5600P)	REMOTE connector
UVW-1800/1700G/1600/1400A/1400/1200 (or UVW-1800P/1700GP/1600P/1400AP/1400P/1200P),DSR-85/80/60 (or DSR-85P/80P/60P)	CONTROL S connector

Power is automatically supplied to this unit from the recorder or player.

Operation

The tape transport buttons of this unit function the same as those on the recorder or player. Recording, playback, fast forward, rewind and pause can be remotely controlled from this unit.

Jog/Shuttle Search

Using the search dials, a search operation can be performed in either jog or shuttle mode.

Jog mode: The speed of playback is determined by the speed of turning the jog dial, in the range from -2 to +2 times normal speed.

Shuttle mode: The speed of playback is determined by the position of the shuttle dial, in the range from -16 to +16 times normal speed. When the shuttle dial is in its center position, a still image is obtained.

The speed ranges in jog and shuttle modes may depend on the type of recorder or player connected. Refer to the operating instructions for the recorder or player.

Note

When operating immediately after the power is turned on, be sure to first return the shuttle dial to its center position.

1 Press the JOG/SHUTTLE button to activate jog/shuttle mode.

The JOG/SHUTTLE indicator lights.

2 To search in jog mode

1) Set the shuttle dial to the center click position.

2) Turn the jog dial.

Each time you turn the jog dial by a discrete amount, this jogs the playback one frame at a time, either forward or backward.

To search in shuttle mode

Turn the shuttle dial.

A playback image appears at the speed according to the angle of the dial rotation. When the dial is set at the center click position, the tape stops and still image is obtained.

To exit from jog/shuttle mode

Press any tape transport button.

The JOG/SHUTTLE indicator goes off, and the recorder or player changes to the operation corresponding to the pressed button.

Specifications

Remote control Stereo mini-plug (with attached

cable, length 3 m (10 ft))

Power requirements

+5 V DC (supplied from the

connected recorder or player)

Power consumption

50 mW

Storage temperature

-20°C to +60°C (-4°F to +140°F)

Operating temperature

5°C to 40°C (41°F to 104°F)

Dimensions (w/h/d)

90 × 46 × 182 mm

(3⁵/ 8 × 1¹³/ 16 × 7¹/₄ inches)

not including the interface cable

Mass Approx. 360 g (12 oz)

Supplied accessories

Operating Instructions (1)

Design and specifications are subject to change without notice.

Note

Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.

Français

For Customer in China

Printed on recycled paper

Sony Corporation Printed in Japan