Pontec

PondoTronic 18 - Water pump Pontec - Free user manual and instructions

Find the device manual for free PondoTronic 18 Pontec in PDF.

📄 112 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Pontec PondoTronic 18 - page 9
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Submersible water pump for pond
Brand Pontec
Model PondoTronic 18
Dimensions (L x W x H) Approx. 210 x 140 x 180 mm
Weight Approx. 1.5 kg
Power supply 230 V / 50 Hz
Power consumption 18 W
Maximum flow rate 18 L/min
Maximum delivery head 2.0 m
Max immersion depth 3 m
Connection Hose 3/4" (19 mm) or 1/2" (13 mm)
Main functions Filtration, water circulation, fountain
Electronic control Integrated flow regulator
Protection Protection rating IP68
Maintenance and cleaning Regular cleaning of pre-filter; descaling if necessary
Use Clean and slightly cloudy water (up to 5 mm particles)
Safety Automatic shut-off in case of overheating; dry-run protection
Max water temperature 35 °C
Spare parts and repairability Pre-filter and rotor available; repairable by a professional
Included accessories Hose adapters, O-ring, user manual

Frequently Asked Questions - PondoTronic 18 Pontec

How to install the PondoTronic 18 pump?
Place the pump horizontally at the bottom of the pond, submerged in water. Connect the outlet hose using the supplied adapters. Plug in the power supply. Make sure the pump is fully submerged before starting.
What is the power consumption of this pump?
The consumption is 18 W under normal operation.
How to clean the pump filter?
Unplug the pump, remove the pre-filter and rinse it with clean water. Use a soft brush if necessary. Replace it before plugging back in.
What to do if the pump does not start?
Check that the pump is properly submerged and the power is connected. Clean the filter if clogged. If the problem persists, contact a technician.
What is the maximum flow rate?
The maximum flow rate is 18 liters per minute.
Can I use the pump for a fountain?
Yes, the pump is suitable for fountains, waterfalls and filtration systems.
What is the maximum delivery head?
The maximum delivery head is 2.0 meters.
Is the pump protected against dry running?
Yes, the pump is equipped with dry-run protection which automatically stops it if it runs without water.
How to adjust the flow rate?
Turn the flow regulator on the pump to adjust the water flow according to your needs.
Where to find spare parts?
Spare parts (pre-filter, rotor, seals) are available from authorized Pontec dealers. Check the official website for more information.

User questions about PondoTronic 18 Pontec

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Water pump in PDF format for free! Find your manual PondoTronic 18 - Pontec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PondoTronic 18 by Pontec.

USER MANUAL PondoTronic 18 Pontec

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Pontec

Model : PondoTronic 18

Category : Water pump