JET-MP - Water pump DAB - Free user manual and instructions
Find the device manual for free JET-MP DAB in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Water pump |
| Brand | DAB |
| Model | JET-MP |
| Category | Water pump |
| Pump type | Self-priming centrifugal pump |
| Use | Domestic water supply, irrigation, pressure boosting |
| Dimensions (L x W x H) | 300 x 200 x 250 mm |
| Weight | 10 kg |
| Power supply | Single-phase 230 V, 50 Hz |
| Nominal power | 0.8 kW |
| Max flow rate | 50 L/min |
| Max head | 40 m |
| Suction/discharge connection | 1" (gas thread) |
| Max liquid temperature | 40 °C |
| Motor protection | Integrated thermal protection |
| Protection rating | IP 44 |
| Insulation class | F |
| Main functions | Self-priming, clear water discharge |
| Maintenance and cleaning | Clean the suction filter regularly, check the seals |
| Safety | Use a 30 mA differential circuit breaker, mandatory grounding |
| Spare parts and repairability | Seals, valve, capacitor available |
| General information | User manual available in PDF at notice-facile.com |
Frequently Asked Questions - JET-MP DAB
How to install the DAB JET-MP pump?
Place the pump on a flat and stable surface near the water source. Connect the suction hose with a submerged filter, and the discharge to your network. Ensure the connections are tight. Fill the pump body with water before first start-up to prime the pump.
Why is my pump not discharging water?
Check that the pump body is primed (filled with water). Make sure the suction filter is not clogged and that the check valve is working. Ensure the discharge valve is open and the motor is rotating in the correct direction.
What is the maximum suction height?
The theoretical maximum suction head is 8 meters. In practice, for proper operation, do not exceed 7 meters of vertical distance between the pump and the water level.
How to maintain the JET-MP pump?
Clean the suction filter regularly. Check the condition of the seals and the valve. If the pump remains unused for a long time, drain it completely to prevent freezing. For more thorough maintenance, consult the manual.
The pump makes an abnormal noise, what to do?
An abnormal noise may be due to cavitation (suction hose too long or clogged) or a worn bearing. Check the water level and the tightness of the suction. If the noise persists, contact a professional.
Can I use the pump for hot water?
No, the maximum water temperature is 40 °C. Using hot water can damage the seals and the motor.
What is the maximum discharge pressure?
The maximum pressure depends on the head. For the JET-MP, the maximum head is about 40 meters, which corresponds to a pressure of about 4 bars.
The pump is leaking at the body, what to do?
Check the pump body gasket. If the gasket is damaged, replace it. Tighten the pump body screws evenly. If the leak persists, check that the pump body is not cracked.
How to prime the JET-MP pump?
Remove the fill plug on top of the pump body. Fill completely with water until it overflows. Replace the plug. Start the pump. If it does not prime, repeat the operation.
Where to find spare parts for the JET-MP?
Spare parts such as seals, valve, and capacitor are available from DAB authorized dealers or online. Use the model reference to order.
User questions about JET-MP DAB
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual JET-MP - DAB and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JET-MP by DAB.
USER MANUAL JET-MP DAB
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DAB
Model : JET-MP
Category : Water pump