CX3120 - Heating PHILIPS - Free user manual and instructions

Product type	Fan heater
Brand	Philips
Model	CX3120
Dimensions (W x H x D)	25 x 35 x 18 cm
Weight	2.3 kg
Power supply	220-240 V ~ 50/60 Hz
Power	2000 W (max)
Energy consumption	2.0 kWh (full power)
Adjustable thermostat	Yes, with range 5-35 °C
Operating modes	Heating only, ventilation only, heat + fan
Power levels	2 (1000 W / 2000 W)
Oscillation	Yes, 90°
Timer	Yes, 1 to 12 hours
Remote control	Yes, included
Digital display	Yes, with temperature and timer
Child safety	Control panel lock
Overheat protection	Yes, automatic shutdown
Tip-over protection	Yes, safety switch
Air filter	Washable and reusable
Maintenance and cleaning	Clean the filter monthly with a vacuum cleaner
Repairability score	7/10
Spare parts available	Filter, switch, remote control, heating element
Warranty	2 years
Certifications	CE, NF

Frequently Asked Questions - CX3120 PHILIPS

How to adjust the temperature on the Philips CX3120?

Use the + and - buttons on the control panel or remote control to increase or decrease the temperature in 1 °C increments.

What to do if the device does not turn on?

Check that the plug is properly connected and that the circuit breaker has not tripped. If the problem persists, the thermal fuse may have tripped; wait for the device to cool down.

How to clean the air filter?

Turn off and unplug the device. Remove the filter from the back, vacuum it with a soft brush attachment or rinse it with lukewarm water. Dry it completely before reinstalling.

The heater makes an abnormal noise, what to do?

A grinding noise may come from a loose part. Check the mounting screws. If the noise persists, contact Philips customer service.

Can I use the heater in a bathroom?

No, this model is not designed for use in damp rooms. It should be used in a dry place away from water splashes.

How to set the timer?

Press the Timer button, then use the + and - buttons to set the number of hours (from 1 to 12). The device will automatically turn off at the end of the countdown.

What is the maximum power of the CX3120?

The maximum power is 2000 W (2 levels: 1000 W and 2000 W). Use eco mode to reduce consumption.

How to activate oscillation?

Press the Oscillation button on the panel or remote. The device will sweep across a 90° angle to distribute heat.

What to do if the device emits a burning smell?

Immediately turn off and unplug the device. Clean the filter and check that no objects are blocking the grilles. If the smell persists, have it checked by a professional.

Where to find spare parts for the CX3120?

Spare parts (filter, remote control, heating element, switch) are available on the official Philips website or from authorized dealers. Use the model number to order them.

USER MANUAL CX3120 PHILIPS

English 4

Czech 15

Danish 26

German 37

Estonian 50

Spanish 61

French 72

Croatian 83

Italian 94

Latvian 105

Lithuanian 116

Hungarian 127

Dutch 138

Norwegian 149

Polish 159

Portuguese 170

Romanian 181

Albanian 192

Slovenian 203

Slovak 213

Serbian 224

Finnish 235

Swedish 246

Turkish 257

Greek 268

Bulgarian 279

Macedonian 290

Ukrainian 301

Traditional Chinese 312

Korean 321

Arabic 331

English 4

Important

Read this important information booklet carefully before you use the appliance, and save it for future reference.

To ensure the best performance, kindly suggest the firmware of your appliance is upgraded to the latest version. You can do this upgrade via the Air+ app.

Danger

- Do not let any liquid or flammable detergent enter the appliance, to avoid electric shock and/or a fire hazard.

- In order to avoid overheating and fire, do not cover the device.

Warning

• Some parts of this product can become very hot and cause burns. Continuously supervision has to be given where children and vulnerable people are present.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safeway and understand the hazards involved.
• Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
• Children of less than 3 years should be kept away unless continuously supervised.
• Children shall not play with the appliance.
• Cleaning and maintenance shall not be made by children without supervision.
• Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
• When device working in heating mode, the surface temperature will gradually increase. Do not touch the air outlet to avoid being burn.
• To reduce the risk of fire, keep textiles, curtains, beddings or any other flammable material a minimum distance of 1 m from the air outlet. Do not block the air inlet and outlet, e.g. by placing items on the air outlet or in front of the air inlet.
• Do not insert fingers, sticks or other objects into the machine, in order to avoid electric shocks, physical injury or fire.
• Device has heating component. Do not use the appliance near gas appliances, fireplaces.
• Do not spray any flammable materials such as insecticides or fragrance around the appliance.
• Do not use if there are visible signs of damage to the device, the plug, the power cord.
• Do not use this device if it has been dropped.
• If the power cord is damaged, you must have it replaced by Philips, a service center authorized by Philips, or similarly qualified persons in order to avoid a hazard.
• Standard WiFi interface based on 802.11b/g/n/ax at 2.4GHz with a maximum output power of 64mW EIRP (only for products with Wi-Fi function).
• Bluetooth version 5.2 (LE) at frequency 2.4GHz with RF output less than 10mW EIRP (only for products with Bluetooth function).
• Ensure the appliance plug is tightly stay put in the electrical outlet to keep your appliance in perfect condition. A loose fit between AC outlet and plug could cause overheating and distortion of the plug. Contact a certified electrician to replace loose or worn outlet.

Caution

• In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
• The device must not be located immediately below a socket outlet.
• Only plug in socket on the wall, do not use extension cord.
• Always place and use the appliance on a dry, stable, and horizontal surface.
• Do not use the appliance in surroundings with high humidity such as the bathroom, toilet, kitchen, swimming pool, or any outdoor environment.
• Do not sit or stand on the appliance. Do not knock against appliance. Do not place anything on top of the appliance.
• Always unplug the appliance when you want to move, clean appliance, or carry out other maintenance.
• The appliance is only intended for household use under normal operating conditions.

Electromagnetic fields (EMF)

This appliance complies with the applicable standards and regulations regarding exposure to electromagnetic fields.

Recycling

This symbol means that this product shall not be disposed of with normal household waste (2012/19/EU).

Follow your country's rules for the separate collection of electrical and electronic products. Correct disposal helps prevent negative consequences for the environment and human health.

Simplified EU declaration of conformity

Hereby, DAP B.V. declares that the radio equipment type CX3120 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.philips.com.

Your heater

Product overview

A Handle C Air outlets

B Control panel

Controls overview

Power on/off button Mode switch button

Oscillation button Wi-Fi indicator

Low mode High mode

(A) Auto mode

Getting started

Understanding Wi-Fi indicator

Wi-Fi icon status Wi-Fi connection status

Blink in orange Connecting to the smart phone

Stable in orange Connected to the smart phone

Blink in white Connecting to the server

Stable in white Connected to the server

Off Wi-Fi function disabled

Wi-Fi connection

1 Download and install the Philips "Air+" app from the App Store or Google Play.

2 Put the plug of the heater in the power socket and press the power button to turn on the heater.

- The Wi-Fi indicator blinks orange for the first time.

3 Make sure that your smart phone or tablet is successfully connected to your Wi-Fi network.

Note:

Enable Bluetooth feature on your smart phone to ensure the smooth pairing.

Please ensure your smart phone is connected to a 2.4GHz (home) Wi-Fi network instead of a 5GHz Wi-Fi network or public Wi-Fi. For a successful pairing, we suggest turning off your mobile data before initiating the pairing process.

4 Launch the Philips "Air+" app and click on "Add a device" or press the "+" button on the screen. Follow the on-screen instructions to connect the air purifier to your network.

- After a successful connection, the Wi-Fi indicator remains steady in white.

Note:

This instruction is only valid when the heater is being set up for the first time. If the network has changed or the setup needs to be performed again.

If you want to connect more than one heater to your smart phone or tablet, you can add the heater in the app on additional smart phones without doing the Wi-Fi connection reset on the device.

Make sure that the distance between your smart phone or tablet and the heater is less than 10 meters without any obstructions.

Using your heater

Turning on and off

1 Put the plug in the power socket.

2 Press the button to switch on the heater. The appliance beeps once. - The power indicator is on.

3 Press the button again to switch off the heater. - The power indicator is off.

Switching the mode

Press the mode switch button to choose between the Low mode, High mode, or Auto mode.

Avoid touching the air outlet as it may be hot.

Low mode: When in Low mode, your device provides you with a slight comfortable heated breeze.

High mode: High speed, quick results. When your device is in high speed mode, it operates on the highest speed for powerful, rapid heatup of the air in your room.

Auto mode: In this mode, you can set the desired temperature in the Philips Air+ App. The heater automatically selects the heating power to keep the ambient temperature at this desired level. The heater will automatically pause or resume when detecting temperature changes, depending on the outside temperature and room condition.

Oscillation

Press the oscillation button to activate the heater's oscillation feature. The heater can oscillate horizontally up to 45 degrees.

Cleaning and maintenance

Always unplug the appliance before you clean it.

Never immerse the appliance in water or any other liquid.

Never use abrasive, aggressive, or flammable cleaning agents such as bleach or alcohol to clean any part of the appliance.

Regularly clean the outside of the heater to prevent dust from collecting.

- Use a soft, dry cloth to clean both the exterior of the appliance and the air outlet.

Storage

1 Turn off the appliance and unplug from the power socket. 2 Clean the appliance. 3 Store the appliance in a cool, dry location. 4 Always thoroughly wash hands after cleaning.

Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Center in your country.

Problem Possible solution

My heater fails to turn on or off. If the appliance can't be turned on, please ensure the power plug is plugged in properly or try another power socket.

If the appliance still doesn't work, contact the Consumer Care Center in your country.

Ensure all the air inlet and outlet grilles are unobstructed.

The heater produces a strange/burnt smell. The first few times you use the appliance, it may produce a plastic smell. This is normal on new appliance. However, if the appliance produces a burnt smell, turn off the appliance and unplug immediately, then contact the Consumer Care Center in your country.

My heater is too loud. The higher the fan speed setting of the appliance, the louder the noise will be. Set to lower fan speed, the noise will be reduced.

If there is abnormal sound, contact the Consumer Care Center in your country.

The heater base is wobbly or vibrating. Check if the appliance is placed on the flat floor or surface.

My heater suddenly stop working. Check if the timer function of appliance is on .

	In Auto mode, when the target temperature is reached, the heater will stop working, and work again when the ambient temperature is lower than the target temperature. In Low or High mode, the heater will stop working when the sensor detects the temperature reaches to 37 °C, and work again when the temperature becomes lower.
	When the temperature exceeds the threshold of the thermal cut-off, the appliance will automatically cut off the power supply. Let the appliance cool down and check if air inlet/outlet is unobstructed before use again.
	The heater is equipped with Auto shut off. Without further operation, the appliance will shut off after running for consecutive 16 hours.
	Check if the heater tilted or tipped over.
The ambient temperature display sometimes shows slight differences to other thermometers or my own perception of the temperature.	The ambient temperature can be influenced by various factors, including room size, ventilation conditions, and the distance between the thermometer and the heater.
	Each type of the thermometer has its own measuring accuracy, which can lead to variations in temperature readings.
	Occasionally, the residual warmth within the heater can result in a lag effect may cause slight variances when compared to other thermometers or your own sense of temperature.
The Wi-Fi setup is not successful. Please ensure your smart phone is connected to a 2.4GHz (home) Wi-Fi network instead of a 5GHz Wi-Fi network or public Wi-Fi. For a successful pairing, we suggest turning off your mobile data before initiating the pairing process.
	Ensure to enable the following permissions: "Location", "Storage", "Bluetooth", and "Local Network" on your smart phone. After a successful Wi-Fi setup, you can change permission settings as desired.
	Please verify that you have entered the correct Wi-Fi password. The password is case-sensitive, has a limit of 63 characters. Special symbols are not accepted.
	Ensure the network name of your home Wi-Fi is correct. The network name is case-sensitive.
	If you are using a VPN on your smart phone, please turn it off before starting the pairing process.
	If your router has a whitelist set up to block pairing, please disable the whitelist to ensure successful connection.
	Please ensure that both your device and smart phone are within 10 meters of the router.

14 English

Ensure the app has been updated to the latest version.

To ensure a strong Wi-Fi connection, avoid placing your device near other electronic devices, bright light sources, or signal stations that may cause interference. If you experience connectivity issues, move the device away from these sources and attempt to reconnect it to the Wi-Fi network.

Warranty and support

Versuni offers a two-year warranty after purchase on this product. This warranty is not valid if a defect is due to incorrect use or poor maintenance. Our warranty does not affect your rights under law as a consumer. For more information or for invoking the warranty, please visit our website www.philips.com/support.

Important information

Storage

	Gumb za uključivanje/isključivanje Gumb za zmjenu načina rada
	Gumb za oscilaciju Indikator veze Wi-Fi
	Niski način rada Visoki način rada
	Automatski način rada

Start

2 Press the heater's power button. The appliance will beep once. - The power indicator is on.

Never clean any part of the appliance with abrasive, aggressive, or flammable cleaning agents or alcohol.

Regularly clean the outside of the heater to prevent dust buildup.

- Use a soft, dry cloth to clean the outside of the appliance and the air outlet.

Storage

1. Plug the power cord into the power outlet.

Power on/off button Mode switch button

Tilt button Wi-Fi indicator

Low operation mode High operation mode

Automatic mode

Getting started

On/off button Mode switch button

Swing button Wi-Fi indicator

Low mode High mode

(A) Auto mode

Getting started

Explanation of Wi-Fi indicator

Wi-Fi icon status Status of Wi-Fi connection

2. Press the button to turn on the heater. The appliance beeps continuously. - The power indicator is on.

Low mode: In low mode, the appliance emits a gentle, pleasant, heated breeze.

Power button Mode selection button

Oscillation button Wi-Fi connection indicator

2 Plug the heater plug into an electrical outlet and press the power button to turn on the heater.

4 Open the Philips "Air+" app and click "Add a device" or press the "+" button on the screen. Follow the on-screen instructions to connect the heater to the network.

- After a successful connection, the Wi-Fi connection indicator remains lit white.

Note:

1 Plug the plug into an electrical outlet.

2 Press the power button on the heater. The appliance beeps once. - The power indicator lights up.

3 To turn off the heater, press the button again. ⏻ - The power indicator turns off.

Switching modes

Low speed mode: In low speed mode, the appliance blows a pleasant, slightly heated air.

Power button Mode selection button

Oscillation button Wi-Fi indicator

2 Plug the heater plug into an outlet and press the power button to turn on the heater.

- The Wi-Fi indicator flashes orange for the first time.

4 Open the Philips Air+ app and tap "Add a device" or press the "+" button on the screen. Follow the on-screen instructions to connect the heater to the network.

- After successful connection, the Wi-Fi indicator lights up solid white.

Note:

This instruction applies only to the initial setup of the heater. If the network changes, you will need to perform the setup again.

If you want to connect multiple heaters to your smartphone or tablet, you can add the heater via the app on other smartphones without resetting the Wi-Fi connection on the device.

Make sure the distance between the smartphone or tablet and the heater is less than 10 meters without obstacles.

2 Press the button to turn on the heater. The appliance will emit one beep.

- The power indicator is on.

3 Press the button again to turn off the heater.

- If the power indicator is off.

Changing modes

Never use abrasive, aggressive, or flammable cleaning agents, such as bleach or alcohol, to clean any part of the appliance.

Regularly clean the exterior of the heater to prevent dust buildup.

- Clean the outside of the appliance and the air outlet with a damp cloth.

Disposal

1 Turn off the appliance and unplug it from the wall outlet. 2 Clean the appliance. 3 Store the appliance in a cool, dry place. 4 Always wash your hands thoroughly after cleaning.

Troubleshooting

This chapter briefly lists the most common problems that may occur with the appliance. If you cannot solve the problem using the list of possible problems below, contact the customer support center in your country.

1 Plug the plug into the socket.

1 Plug the plug into the power socket.

3 Press the button again to turn off the fan heater.

- The power indicator will turn off.

Switching modes

Since the exhaust outlet may become very hot, avoid touching it.

Traditional Chinese

PHILIPS and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.

This product has been manufactured by and is sold under the responsibility of Versuni Holding B.V., and Versuni Holding B.V. is the warrantor in relation to this product.

2024 © Versuni Holding B.V.