WowStick BT-CSD004 - Screwdriver Batavia - Free user manual and instructions
Find the device manual for free WowStick BT-CSD004 Batavia in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless screwdriver |
| Brand | Batavia |
| Model | WowStick BT-CSD004 |
| Dimensions (L x W x H) | Approx. 20 x 5 x 5 cm |
| Weight | Approx. 0.3 kg |
| Power supply | Rechargeable lithium-ion battery |
| Battery voltage | 3.6 V |
| Battery capacity | 1500 mAh |
| No-load speed | 200 RPM |
| Max torque | 5 Nm |
| Chuck | Hexagonal 6.35 mm (1/4 inch) |
| Main functions | Screwing and unscrewing |
| LED lighting | Yes, built-in |
| Charger included | Yes, USB charger |
| Charging time | Approx. 3 hours |
| Housing material | ABS plastic |
| Maintenance and cleaning | Clean with a dry cloth, do not use solvents |
| Safety | Automatic shut-off in case of overload, battery lock |
| Spare parts and repairability | Battery and charger available as spare parts |
| Warranty | 2 years |
Frequently Asked Questions - WowStick BT-CSD004 Batavia
How to charge the Batavia WowStick BT-CSD004 screwdriver?
Plug the included USB charger into a compatible power source (e.g., a USB power adapter) and connect it to the screwdriver's battery. The LED indicator shows the charge status; a steady light means the battery is fully charged. Charging time is approximately 3 hours.
What bits can I use with this screwdriver?
This screwdriver uses a 6.35 mm (1/4 inch) hexagonal chuck. You can use all standard bits with this hexagonal shank, such as Phillips, flat, Torx bits, etc.
Can the screwdriver drill?
No, the WowStick BT-CSD004 is a screwdriver designed only for screwing and unscrewing. It is not suitable for drilling; its torque and speed are too low for that application.
How to reverse the rotation direction?
A rotation direction switch is located on the screwdriver body. Push it forward for screwing and backward for unscrewing. Make sure the tool is at a standstill before changing direction.
What to do if the battery does not hold a charge?
If the battery discharges quickly, it may be at the end of its life. Try to fully charge it and use it for several cycles. If the problem persists, replace the battery with a new one (available as a spare part).
Does the tool's LED always work?
The LED turns on when you press the trigger to illuminate the work area. If it does not light up, check that the battery is charged and properly installed. In case of defect, contact customer service.
How to clean the screwdriver?
Use a soft, dry cloth to wipe the housing. Never use solvents, abrasive liquids, or water. Keep ventilation openings free of dust.
Can I use the screwdriver continuously without overheating?
It is recommended to take breaks after 15 to 20 minutes of continuous use to prevent overheating. The tool has thermal protection that shuts it off automatically in case of overheating.
What is the warranty of the device?
The Batavia WowStick BT-CSD004 screwdriver is covered by a 2-year warranty from the date of purchase against any material or manufacturing defects. Keep your receipt.
Where can I find spare parts?
Spare parts such as the battery and charger are available from Batavia customer service or authorized retailers. Contact support for availability.
User questions about WowStick BT-CSD004 Batavia
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screwdriver in PDF format for free! Find your manual WowStick BT-CSD004 - Batavia and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WowStick BT-CSD004 by Batavia.
USER MANUAL WowStick BT-CSD004 Batavia
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Batavia
Model : WowStick BT-CSD004
Category : Screwdriver