A6 - Water dispenser Avalon - Free user manual and instructions
Find the device manual for free A6 Avalon in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Dispenser |
| Brand | Avalon |
| Model | A6 |
| Dimensions (H x W x D) | 90 x 30 x 30 cm |
| Weight | 10 kg |
| Power Supply | 220-240 V, 50 Hz |
| Nominal Power | 500 W (heating), 100 W (cooling) |
| Cold Water Tank Capacity | 3 L |
| Hot Water Tank Capacity | 1 L |
| Main Functions | Hot, cold, and room temperature water dispensing |
| Cooling System | Compressor |
| Heating System | Electric resistance |
| Materials | Stainless steel and ABS plastic |
| Maintenance and Cleaning | Clean the tank every 3 months; descale every 6 months |
| Safety | Auto shutdown, child lock, overheat protection |
| Spare Parts and Repairability | Available parts: tank, pump, tap, filter |
| Warranty | 2 years |
| General Information | Versatile water dispenser for home or office |
Frequently Asked Questions - A6 Avalon
Why is the water not flowing?
Check that the tank is full and the pump is powered. Make sure the child lock is not activated. If the problem persists, refer to the manual for troubleshooting steps.
How to clean the water dispenser?
Unplug the appliance and empty the tank. Clean surfaces with a soft cloth and diluted white vinegar. Rinse thoroughly. For full maintenance, follow the instructions in the manual.
The hot water is too cold, what to do?
Check that the heating function is activated. Wait 10-15 minutes after turning it on. If the problem persists, the thermostat may be defective; contact customer service.
The dispenser makes an abnormal noise, is this normal?
A slight humming from the compressor is normal. If the noise is loud or irregular, check that the appliance is level and that nothing is blocking the ventilation. Refer to the manual for noise levels.
How to install the water dispenser?
Place the appliance on a flat surface near a power outlet. Connect the bottle or tank according to the model. Let it rest for 2 hours before use to allow the system to stabilize.
Is a filter needed? How to change it?
Yes, a filter is integrated to purify the water. Replace it every 6 months or based on usage. To change it, follow the steps in the manual: remove the old filter, insert the new one following the direction of flow.
The water has a bad taste, what to do?
Rinse the tank and tubes with fresh water. Replace the filter if necessary. Avoid using chemicals. If the taste persists, contact the manufacturer.
How to use the child lock?
Activate the child lock by pressing the dedicated button for 3 seconds. An indicator light turns on. To deactivate, repeat the operation. This prevents accidental burns when dispensing hot water.
What to do in case of a water leak?
Immediately cut off the power supply. Check the hose connections and tank. Tighten fittings if necessary. If the leak is from an internal part, consult a certified technician.
What is the power consumption?
The average consumption is about 0.5 kWh per day under normal use. Standby mode reduces consumption. For precise data, refer to the energy label in the manual.
User questions about A6 Avalon
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water dispenser in PDF format for free! Find your manual A6 - Avalon and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. A6 by Avalon.
