BB16 - Hi-Fi System BLAUPUNKT - Free user manual and instructions

Product Type	Hi-Fi System
Brand	Blaupunkt
Model	BB16
Dimensions (W x H x D)	Approx. 250 x 150 x 300 mm
Weight	Approx. 3 kg
Power Supply	AC 100-240V, 50/60Hz
Power Output	2 x 25W RMS
Supported Media	CD, CD-R/RW, MP3-CD
Radio Bands	FM, AM
Connectivity	Bluetooth 5.0, USB, AUX 3.5mm, Headphone Jack
Speaker System	2-way bass reflex speakers
Display	LCD with backlight
Remote Control	Included
Functions	CD player, FM/AM tuner, Bluetooth streaming, USB playback, AUX input, alarm clock, sleep timer
Cleaning and Maintenance	Wipe with a soft, dry cloth. Do not use chemicals.
Safety	Keep away from water and heat sources. Do not open the casing.
Spare Parts and Reparability	Contact Blaupunkt customer service for spare parts and repairs.
General Information	User manual available for download in multiple languages.

Frequently Asked Questions - BB16 BLAUPUNKT

How do I set the clock on the Blaupunkt BB16?

Press and hold the Clock button on the remote control or front panel until the hour digits flash. Use the Tuning +/ buttons to adjust the hour, then press Clock again. Repeat for minutes.

How do I connect my phone via Bluetooth?

Press the Source button until Bluetooth appears on the display. On your phone, enable Bluetooth and select Blaupunkt BB16 from the list. Pairing code is 0000 if required.

What should I do if the CD skips or does not play?

Check that the CD is clean and not scratched. Use a soft cloth to wipe the disc from the center outward. Ensure the CD is inserted label-side up. If problem persists, try a different CD.

Can I play music from a USB flash drive?

Yes, insert a USB flash drive (FAT32 format) into the USB port. Press Source until USB is selected. The system will automatically play MP3 files.

How do I preset radio stations?

Tune to the desired station manually or by auto search. Press and hold one of the Preset buttons (1-5) until a beep confirms. Repeat for other presets.

Why is there no sound from the speakers?

Check that the volume is not at minimum. Ensure the correct source is selected. Verify speaker connections are secure. If using headphones, they will mute the speakers.

How do I clean the Hi-Fi system?

Unplug the system. Wipe the exterior with a soft, dry cloth. For stubborn stains, dampen the cloth slightly with water. Do not use alcohol or solvents. Clean the CD lens with a lens cleaner disc.

What is the sleep timer and how do I set it?

The sleep timer automatically turns off the system after a set time. Press the Sleep button repeatedly to select 15, 30, 60, or 90 minutes. The display will show the remaining time.

Can I use the system with a TV?

Yes, connect your TV audio output to the AUX IN port using a 3.5mm audio cable. Then select AUX as the source on the system.

Where can I find the user manual if it's missing?

The manual is available for free on notice-facile.com. Visit the Blaupunkt BB16 product page and download the PDF in your preferred language.

USER MANUAL BB16 BLAUPUNKT

Enjoy it.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

Important Safety Instructions

Caution:

To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.

Explanation of Graphical Symbols:

The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

To achieve the utmost in enjoyment and performance, and in order to become familiar with its features, please read this manual carefully before attempting to operate this product. This will assure you years of trouble free performance and listening pleasure.

Important Notes

• This safety and operating instruction should be retained for future reference. - The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom. - Do not install the product in the following areas: - Places exposed to direct sunlight or close to radiators. ○ On top of other stereo equipment that radiate too much heat. ○ Blocking ventilation or in a dusty area. ○ Areas where there is constant vibration. ○ Humid or moist places. • Do not place near candles or other naked flames. • Operate the product only as instructed in this manual. - Before turning on the power for the first time, make sure the power adaptor is properly connected. - Plug-in the USB stick directly or use an USB-extension cable which is not longer than 25 cm.

For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.

Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.

SAFETY INSTRUCTIONS

1. Read Instructions - All the safety and operating instructions must be read before the product is operated.
2. Retain Instructions - The safety and operating instructions should be kept with the product for future reference.
3. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
4. Follow instructions - All operating and users' instructions should be followed.
5. Installation - Install in accordance with the manufacturer's instructions.
6. Power sources - This product should be operated only from the type of power source indicated by the marking adjacent to the power cord entry. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
7. Grounding or polarization - the product is not required to be grounded. Ensure that the plug is fully inserted into the wall outlet or extension cord receptacle to prevent blade or pin exposure. Some versions of the product are equipped with a power cord fitted with a polarized alternating line plug (a plug having one blade wider than the other). This plug will fit onto the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. When using an extension power-supply cord or a power-supply cord other than that supplied with the appliance, it should be fitted with the appropriate molded plugs and carry safety approval appropriate to the country of use.
8. Power cord protection - Power-supply cords should be routed so that they are not likely to be walked on, kinked or pinched by items placed on or against them, paying particular attention to cords from plugs, receptacles and the point where they exit from the product.
9. Overloading - Do not overload wall outlets, extension cords, or multiple sockets, as this can result in a risk of fire or electric shock.
10. Ventilation - The product must be properly ventilated. Do not place the product on a bed, sofa, or other similar surface. Do not cover the product with any items such as tablecloths, newspapers, etc.
11. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products, including amplifiers that produce heat. No naked flame sources, such as lighted candles, should be placed on the apparatus.
12. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool (or similar).
13. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-circuit parts that

could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the product.

1. Cleaning - Unplug the product from the wall outlet before cleaning. Dust in the woofer may be cleaned with a dry cloth. If you wish to use an aerosol cleaning spray, do not spray directly on the cabinet; spray onto the cloth. Be careful not to damage the drive units.
2. Attachments - Do not use attachments not recommended by the product manufacturer, as they may cause hazards.
3. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any mounting of the product should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer.
4. Moving the product - A product and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the product and cart combination to overturn.
5. Unused periods - The power cord of the appliance should be unplugged from the outlet during lightning storms or when the apparatus is left unused for a long period of time.
6. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
7. Please remove the power plug from the main power source or wall power source when not in use. When plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.
8. Replacement parts - When replacement parts are required, ensure that the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
9. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and rating. The correct fuse specification for each voltage range is marked on the product.
10. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speaker may be damaged when a peak level section is suddenly played.
11. The only means of completely disconnecting the product from the power supply is by removing the power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must remain freely accessible at all times while the product is in use.
12. Try to install the product near a wall socket or extension cord and shall be easily accessible.
13. The highest environmental temperature suitable for this product is 35°C.
14. ESD hints - If the product maybe reset or not reset to operation of control due to electrostatic discharge, just switch off and reconnect again, or move the product to another location.

28. Battery

1) The batteries must not be exposed to excessive heat such as sunshine, fire or the like. 2) The batteries should be drawn to the environmental aspects of battery disposal. 3) Battery usage CAUTION - to prevent battery leakage which may result in body injuries, property damage, or damage to the apparatus:

• Install all batteries correctly, + and - as marked on the apparatus.
• Do not mix batteries (old and new or carbon and alkaline, etc.)
• Remove batteries when the unit is not used for a long time.

WARNING

This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

1. Never use the device unsupervised! Switch off the device whenever you are not using it, even if this only for a short while.
2. The appliance is not intended to be operated by means of an external timer or separate remote control system.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
4. Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
5. The unit should not be impeded by covering the ventilation opening with items such as newspaper, table-cloths, curtains etc. Make sure that there are at least 20 cm of space above and at least 5 cm of space on each side of the unit.
6. The apparatus must not be exposed to dripping or splashing and that objects filled with liquids, such as vases, must not be placed on the apparatus.
7. To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture or dust.
8. Do not locate this unit near any water sources e.g. taps, bathtubs, washing machines or swimming pools. Ensure that you place the unit on a dry, stable surface.
9. Do not place this unit close to a strong magnetic field.
10. Do not place the unit on an amplifier or receiver.
11. Do not place this unit in a damp area as the moisture will affect the life of electric components.
12. If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the player. If this occurs, the system will not operate properly. Please leave the system turned on for about an hour until the moisture evaporates.
13. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth.
14. When removing the power plug from the wall outlet, always pull directly on the

plug, never pull on the cord.

1. Depending on the electromagnetic waves used by a television broadcast, if a TV is turned on near this unit while it is also on, lines might appear on the TV screen. Neither this unit nor the TV is malfunctioning. If you see such lines, keep this unit well away from the TV set.
2. The mains plug is used as the disconnect device, the disconnect device must remain readily operable.
3. To keep the laser pickup clean, do not touch it, and always close the disc tray.
4. During playback, the disc rotates at high speed. DO NOT lift or move the unit during playback, doing so may damage the disc or the unit.
5. When changing places of installation or packing the unit for moving, be sure to remove the disc and return the disc tray to its closed position in the player. Then, press switch to turn the power off and disconnect the power cord. Moving this unit with the disc loaded may result in damage to this unit.
6. Put discs back in their case after playing them. Never expose discs to direct sunlight or heat sources. Never leave discs inside a car parked in full sunlight.
7. Do not touch the playback side of disks. Hold discs by the edges to avoid leaving fingerprints on the surface. Any dust, fingerprints or scratches may cause a malfunction. Never attach a label or sticky tape to the disc.
8. Use a clean soft lint-free cloth to clean the disc, working from the center outwards in a straight line, thinners, commercially available cleaners or anti static sprays for vinyl discs.
9. To prevent possible hearing damage, do not listen at high volume levels for long periods.

WARNING: DANGER OF RADIATION

CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT

This label means that this unit contains a laser component. Opening the CD compartment lid and defeating the safety interlocks will expose the user to radiation from the laser beam. Do not stare into the laser while it is operating.

BEFORE OPERATION

Notes: Concerning compact discs.

Since dirty, damaged, or warped discs may damage the appliance, care should be taken of the following items:

a. Usable compact discs. Use only compact discs with the mark shown below.

b. Compact discs with digital audio signals only.

NOTICE

CE

Conformity

Hereby, Blaupunkt Competence Center 2N-Everpol Sp. z o.o., declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity can be obtained from the product page at www.blaupunkt.com.

Responsible party: 2N-Everpol Sp. z o.o, Puławska 403A, 02-801 Warsaw, Poland,

Phone: [phone], E-mail: [e-mail]

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product, it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2013/56/EU, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer), and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries, and old equipment.

Recording and playback of material might require consent. See Copyright Act 1956 and The Performer's Protection Acts 1958 to 1972.

ERP2 - (Energy Related Products) note

This product with ecodesign complies with the stage 2 requirements of Commission Regulation (EC) No. 1275/2008 implementing Directive 2009/125/EC regarding standby and off mode electric power consumption of electronic household and office equipment. After 60 minutes without any

audio input, the device will automatically switch into standby mode. Follow the instruction manual to resume operation.

Important note:

This device is equipped with an energy saving mode: if no signal is given during 60 minutes, the device will switch automatically into standby mode in order to save energy (ERP 2 standard). Please note that low volume setting in the audio source may be recognized as "no audio signal": this will affect the capability of signal detection from the device and can also originate an automatic switch into standby mode. If this happens, please reactivate the audio signal transmission or increase the volume setting on the audio source player (MP3 player, etc.), in order to resume playback. Please contact the local service center if the problem remains.

LOCATION OF CONTROLS

Name of controls

1. Handle;
2. FM Antenna;
3. CD Compartment;
4. Pause key;
5. Stop/eject key;
6. Fast-forward key;
7. Rewind key;
8. Play key;
9. Record key;
10. 10-fold/M.-button;
11. 10-fold/M.+ button;
12. Play/pause button;
13. Stop button;
14. Volume decrease button;
15. Volume increase button;
16. Standby/function button;
17. Next/Tune + button;
18. Program/memory/play mode button;
19. Previous/Tune – button;
20. Speaker;
21. Cassette compartment;
22. AC socket;
23. Battery compartment;
24. Phone jack;
25. Aux in jack;
26. LCD display;
27. USB port;

Power source

This unit is designed to be operated both with AC and with DC.

AC operation

Plug the tail of AC power cord into AC jack on unit and the cord into AC wall outlet. The batteries will be automatically disconnected.

DC operation

Open the BATTERY COMPARTMENT DOOR. Install 6 pcs UM-1/D size batteries (not included) into compartment. Please follow correct polarities as indicated.

Caution

Remove batteries if they are flat or not being used for a long time.

Batteries contain chemical substances, so they should be disposed of properly.

Basic function

Switching on the unit

After connecting the power, press the standby/function button to turn on the unit, then press the standby/function button again to choose CD/USB/AUX/TAPE or RADIO mode. Long press the standby/function button to turn off the unit.

NOTE: In CD/USB/AUX/TAPE mode, when the unit is not providing the main function for 60 minutes, the unit will automatically switch into standby mode. In tape mode, only the tape stops for 60 minutes, the unit will automatically switch into standby mode. To turn on the unit again, press the standby/function button or re-plug the unit.

ESD hints – The product may reset or not reset to operation of control due to electrostatic discharge. Just switch off and reconnect again.

Adjust volume

Press the VOL.+/- button to increase or decrease volume.

Headphone jack

For private listening, connect a 3.5mm headphone (not included) to the headphone jack. The speaker output will be automatically disabled.

Caution: listening at a high volume over a long period is not good for your ears.

Using the radio

Before starting radio listening, fully extend the FM antenna and try to move the unit next to a window in order to get better signal reception. Press the standby/function button to enter FM radio mode.

1. FM tune and scan: Short press the Tune +/- button to increase or decrease the FM frequency by 0.05 MHz. Press and hold the Tune +/- button for 2 seconds to auto scan and play the available station in upward or downward frequency. Press and hold it again to scan the next station.
2. FM manual preset memory: When you tune a favorite station using the Tune +/- button, press the Program/memory/play mode button to start the preset program. Press the 10/fold./M.- or 10/fold./M.+ button to switch the preset station number (max supported 40 preset stations) that you want to save. Press the Program/memory/play mode button again to confirm your selection. Then the station will be saved as your selected preset number.
3. All-in-one scan (auto scan and preset station up to 40): Short press the play/pause button to scan and save the available stations automatically. Short press the 10/fold./M.- or 10/fold./M.+ button to pick up the preset station.

Cassette operation

Playback of cassette

Be sure to tighten any slack tape in the cassette before using. Use either a pencil or a ball-point pen. Simply insert the pen or pencil into the center of the spool and rotate to remove slackness.

Press the STOP/EJ button to open the cassette door.

Insert the cassette into the compartment with the open end facing upwards and the full reel on the left hand side. Push the cassette well down and close the door. Be sure not to touch the tape surface. Set the function switch to "TAPE" and press the cassette play button. To stop playback, press the STOP/EJ button once. To release the cassette, press the STOP/EJ button again.

AUTO STOP

When the tape reaches the end during playback or recording, the built-in auto stop system will release the play button or record button. The auto stop system would only bring the cassette function to stop mode while recording from the built-in radio or CD player; the radio or CD player will continue to play.

Recording from radio

1. Load a blank tape into the tape compartment and close the door.
2. Press the Standby/Function button to choose FM mode.
3. Tune to the required station by pressing Next/TUN.+ or Previous/TUN-.
4. Press the RECORD key to begin recording. The RECORD key and PLAY key go down simultaneously.
5. Press STOP/EJ key to end recording.
6. To hear what you recorded, follow the instructions in "Playback of cassette".

Note: Pause for a moment - Using the Pause key on the cassette deck instead of the STOP/EJECT key to momentarily interrupt recording gives you a much clearer recording. Press the Pause key again to resume recording.

Recording from CD/USB/AUX

1. Insert a blank cassette tape into the tape compartment.
2. Press the standby/function button to choose CD, USB, or AUX mode.
3. Load a CD, or insert a USB, or connect an external audio device from the AUX jack, then select the desired track you want to record.
4. Press the Play/Pause button to start playback. Press the Record key to begin recording. The Record key and Play key go down simultaneously.
5. Press the Pause key to interrupt or edit recording. Press it again to resume recording.
6. Press the STOP/EJECT key to end recording.
7. To hear what you recorded, follow the instructions in "Playback a Cassette".

Types of Cassette

Use only good quality cassettes (IEC TYPE 1) for making recordings. The use of C120 cassettes is NOT recommended in this machine.

Care of Cassette Mechanism

Gently clean the tape head and pinch wheel/capstan assemblies after every 10 hours of using the unit.

The play head and surface of the pinch roller are delicate and shall not be touched with metal objects such as screwdrivers. You may find it easier to clean the assembly by pressing the Play button to bring the head and pinch roller into view. Be sure to press the Stop button after cleaning the mechanism.

Damage to the pinch wheel can occur if the unit is left in Play mode with the power switch off. Under no circumstances should you attempt to lubricate any part of the machine.

CD/MP3 operation

Discs for Playback

This system can play all digital audio CD, MP3, WMA finalized digital audio CD-Recordable (CD-R) discs, finalized digital audio CD-Rewritable (CD-RW) discs, and CD-DA format digital audio CD/CD-R/CD-RW discs.

LOADING A DISC

1. Press the STANDBY/FUNCTION button to choose CD mode.
2. Open the CD door. "OPEN" will be shown on the display.
3. Place an audio CD into the tray with the label side facing up.
4. Close the CD door. The total number of tracks will appear on the display after reading is finished.
5. To remove the CD, press the Stop button and open the CD compartment lid, grasp the CD by its edges, and carefully take it out.

Note:

1. To ensure good system performance, wait until the disc tray completely reads the disc before proceeding.
2. If no disc is loaded into the compartment, or the disc is placed upside down, the display will show "NO CD".

Playing a disc

After loading a disc, playback starts from track 1 automatically.

To interrupt playback, press the Play/Pause button. The play indicator will flash and the current track number will show on the display.

To resume playback, press the Play/Pause button again.

To stop playback, press the Stop button. The total number of tracks appears on the display.

Selecting a desired track/passage

To select a desired track

Press the Next/TUN.+ or previous/TUN.- button repeatedly in stop mode or during play until the desired track appears on the display.

To search for a particular passage during playback (track scanning at high speed)

Press and hold the Next/TUN.+ or previous/TUN.- button to scan the current playing track at high speed until the desired passage appears, then release the button. Playback will start again from this point.

To select a song whose track number exceeds 10 (for MP3 disc only)

To select a song/track whose number exceeds 10, press the 10/fold./M.+ or 10/fold./M.- button each time to skip forward/backward 10 tracks, then press the Next/TUN.+ or previous/TUN.- button to select the desired track. For example: to select the 17th track, press the 10/fold./M.+ button, then press the Next/TUN.+ six times immediately.

To select a desired folder (for MP3 disc only)

(if the MP3 disc contains more than one folder)

To skip to the desired folder during playback, press and hold the 10/fold./M.+ or 10/fold./M.- button for about 2 seconds to skip to the next/previous folder.

Program tracks

Programming tracks of a disc is possible when playback is stopped. Up to CD 20 tracks / MP3 99 tracks can be stored in the memory in any order.

1. In stop mode, press the PROG./MEM./P-MODE button. The "PROG" will flash and the P01 indicator will be on.
2. Press the Next/TUN.+ or previous/TUN.- button to select the first desired track to be programmed.
3. Press the PROG./MEM./P-MODE button to enter. The display changes to show P02.
4. Repeat steps 2 & 3 to store other desired tracks until all tracks are programmed.
5. Press the Play/Pause button to start playback from the first programmed track.
6. Press the Stop button to stop program playback.

To Erase the Memory (Program)

To clear the program, you have two options:

1. Press the Stop button when the disc is stopped, or
2. Open the CD compartment lid, program will be erased.

Repeat

To repeat a single track

Press the PROG./MEM./P-MODE button once in play mode, "will flash on the display. The current track will be played repeatedly until the Stop button is pressed.

To cancel Repeat function, press the PROG./MEM./P-MODE button until the " " disappear on the LCD display.

To repeat all the Tracks

1. Press PROG./MEM./P-MODE button in play mode till the " " shows steady on the display, all tracks on the disc will be played repeatedly until the Stop button is pressed.
2. To cancel Repeat function, press the PROG./MEM./P-MODE button until the "REPEAT" disappears from the LCD display.

To repeat current folder (for MP3 only)

1. Press PROG./MEM./P-MODE button in play mode, until "FOLD" shows steadily on the display. The current folder will be played repeatedly until the Stop button is pressed.
2. To cancel Repeat function, press the PROG./MEM./P-MODE button until "FOLD" disappears from the LCD display.

Random play

Press the PROG./MEM./P-MODE button in play mode until "RDM" shows steadily on the display. Random play will start immediately and continue until all tracks have been played, then stop. Press the PROG./MEM./P-MODE button once to cancel.

Intro

Press the PROG./MEM./P-MODE button on the unit in play mode until "INTRO" shows steadily on the display. Intro play will start and scan the first 10 seconds of every track. To cancel intro play, press the PROG./MEM./P-MODE button until "INTRO" disappears from the display.

USB operation

1. Press the STANDBY/FUNCTION button to choose USB mode.
2. Connect the USB to the USB INPUT. The LCD will show the total number of tracks and folders stored in the USB. After reading the USB, the unit will start playback automatically.
3. Press the Stop button on the unit to stop playing. The display will show the total number of tracks in the USB.
4. Proceed with repeat play (repeat 1 - repeat folder - repeat all -), program play, skip up and back operations as described in the above "CD/MP3 OPERATION" section.

Caution:

1. Do not use any USB extension cable for connecting the USB bar, as it may cause harmful interference.
2. The USB port is only available for playing music. It does not support charging any device.
3. The maximum size of the flash drive that can be supported is up to 32GB. USB is suitable for music playback only. Most MP3 files are supported, and other music formats may not be played.
4. Smartphone playback via USB cable and encrypted USB devices may not be supported on this unit.

AUX IN OPERATION

This unit provides a 3.5mm AUX IN jack, through which other audio sources can be connected to this unit and amplified.

1. Press the Standby/function button to choose AUX mode.
2. Connect the audio cable (not included) into the AUX IN jack and the other end to the AUDIO OUT jack of the external audio source. The unit will change to AUX mode automatically.
3. Adjust the volume of the main unit to your desired level.
4. Press PLAY on the external audio source (e.g., MP3 player) to start playback.

Specification

Power Requirement: AC100-240V ~60/50Hz

DC 9V UM-1 x 6 PCS (batteries not included)

Weight: Approx. 1.46 kg

Dimensions: Approx. 285mm (W) x 213mm (D) x 140mm (H)

Operating temperature: +5°C to +45°C

FM Frequency Range 87.5–108 MHz

USB Max supported device up to 32GB

Optical Pickup 3 - Beam Laser

Frequency Response 100Hz - 16KHz

Recording System 2 Tracks 2 Channel (Stereo)

Bias System DC Bias

Frequency Response 125 - 6.3 K Hz

Wow and Flutter 0.35% WRMS (JIS)

Power output 1.5 Watts x 2

Power consumption 12 Watts

Standby power consumption <0.5W

(the above spec may update without prior notice)

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK

ELECTRICAL

DO NOT OPEN

FM band 87.5-108 MHz

Wow and flutter 0.35% WRMS (JIS)

WARNING: RADIATION HAZARD

CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT

Wow and flutter 0.35% WRMS (JIS)

IMPORTANT SAFETY INSTRUCTIONS

RISK OF ELECTRIC SHOCK DO NOT OPEN

WARNING: RADIATION HAZARD

CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT

Wow and flutter 0.35% WRMS (JIS)

IMPORTANT SAFETY INSTRUCTIONS

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Important Safety Instructions

Caution:

To reduce the risk of electric shock, do not remove the cover or the back of the device. There are no user-serviceable parts inside. Servicing and repair should be performed only by qualified service personnel.

Explanation of Graphic Symbols:

The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the presence of uninsulated "dangerous voltage" within the device's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle alerts the user to the presence of important operating and maintenance instructions in the literature accompanying the device.

Read this manual before using the device to

CLASS 1 LASER PRODUCT

LUOKAN 1 LASERLAITE

KLASS 1 LASERAPPARAT

This label indicates that laser components are present inside the device. Opening the CD compartment cover and bypassing the interlocks may expose the user to laser radiation. Do not stare into the laser beam while it is operating.

BEFORE OPERATION

Notes on Discs.

Dirty, damaged, or deformed discs may cause damage to the device. Please note the following:

Wow and flutter 0.35% WRMS (JIS)

Output power 1.5 W x 2

Power consumption 12 W

Power consumption in standby <0.5 W

(The above specification may be changed without prior notice)

IMPORTANT SAFETY INSTRUCTIONS

RISK OF ELECTRIC SHOCK DO NOT OPEN

FM band 87.5-108 MHz

Wow and flutter 0.35% WRMS (JIS)

Output power 1.5 W x 2

Power consumption 12 watts

Wow and flutter 0.35% WRMS (JIS)

FM band 87.5-108 MHz

Wow and flutter 0.35% WRMS (JIS)

WARNING: RADIATION SOURCE

CLASS 1 LASER PRODUCT

CLASS 1 LASER PRODUCT

CLASS 1 LASER APPARATUS

BEFORE STARTING WORK

Wow and flutter 0.35% WRMS (JIS)

Wow and flutter 0.35% WRMS (JIS)

CLASS 1 LASER PRODUCT

CLASS 1 LASER PRODUCT

CLASS 1 LASER APPARATUS

BEFORE STARTING WORK

Wow and flutter 0.35% WRMS (JIS)

02-801 Warsaw, Poland

phone: [phone]

e-mail: [e-mail]

www.blaupunkt.com

In case of questions or problems

Please contact our service.

Tel. [phone]

E-mail: [e-mail]

All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.

Enjoy it.