SRL 100 A1 - Lamp SILVERCREST - Free user manual and instructions

Product Type	LED Desk Lamp
Model Number	SRL 100 A1
Brand	SilverCrest
Light Source	LED (non-replaceable)
Power Supply	AC adapter (input: 100-240 V, output: 12V DC)
Power Consumption	6 W (max)
Luminous Flux	400 lm
Color Temperature	3000K - 6000K (adjustable)
Brightness Levels	3 levels (low, medium, high)
Dimensions (approx.)	40 x 18 x 38 cm (height x width x depth)
Weight	0.6 kg
Materials	Aluminum, ABS plastic
Adjustable Arm	Yes, with flexible gooseneck
Touch Control	Yes (on/off and dimming)
USB Charging Port	1 x USB-A (5V, 1A)
Eye Protection	Flicker-free, anti-glare
Protection Class	II (double insulated)
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C
Maintenance	Wipe with dry, soft cloth; do not use liquid cleaners
Safety Instructions	Do not cover during use; keep away from water and high humidity
Spare Parts Availability	Only provided by manufacturer; LED unit not user-replaceable
Repairability	Not designed for repair; consult service center for defects

Frequently Asked Questions - SRL 100 A1 SILVERCREST

How do I turn the lamp on/off?

Touch the sensor button on the base or the neck. A single tap toggles power.

Can I adjust the brightness?

Yes, tap and hold the sensor button to cycle through 3 brightness levels (low, medium, high).

How do I change the color temperature?

The lamp automatically cycles through color temperatures when you adjust brightness. Some models have a separate button.

Does the lamp have a USB port for charging?

Yes, it features a USB-A port (5V, 1A) for charging devices like smartphones.

What power adapter does the lamp require?

It uses a 12V DC adapter (input 100-240V). The adapter is included in the box.

Is the LED replaceable?

No, the LED module is integrated and not user-replaceable. The lamp should last for many years under normal use.

Can I use the lamp while charging?

Yes, the lamp operates via the power adapter; there is no internal battery.

How do I clean the lamp?

Unplug the lamp and wipe with a dry, soft cloth. Do not use water or chemical cleaners.

What should I do if the lamp flickers?

Check the power adapter connection. If the problem persists, contact the service center. The lamp is designed to be flicker-free.

Is the lamp suitable for reading?

Yes, it offers adjustable brightness and color temperature with anti-glare and flicker-free light, ideal for reading.

USER MANUAL SRL 100 A1 SILVERCREST

Infrared Lamp SRL 100 A1

SI

Operating Instructions Infrared Lamp ...... Page 3

PL

Electrical Properties 3

General Safety Precautions 4

Special Safety Precautions 6

Intended Use 7

Introduction 7

Initial Use 7

Heat treatment with infrared light 8

Caring for Your Appearance 8

Important for the Sportsman 8

When Should I Seek Medical Advice? .. 8

Cleaning 9

Lamp Durability 9

Changing the Bulb 9

Ambient Conditions for

Transport/Storage 9

Repairing Possible Faults 10

Disposal 10

WARRANTY 11

Warranty card 11

Manufacturer

Electrical Properties

Rated voltage 230 V\~

Nominal power max. 100 W consumption

Rated frequency 50 Hz

Important Information! Please retain these instructions!

Please read through the operating instructions carefully, particularly the safety instructions, before using the appliance and please retain the operating instructions for further use. If the appliance is passed on to a third party, please ensure you provide the user with these operating instructions.

The Appliance

View of the unit, see page 2:

A Infrared lamp
B Lamp housing
C Lamp stand
D Mains cable

Explanation of symbols

	Protective category II unitThis symbol means that the unit is double insulated.
	These operating instructions belong to this appliance.Please read thoroughly.
	This symbol means that it offers information about how to use the unit correctly.
Danger	Danger warning symbol – draws attention to risk of personal injury.
Caution	Caution warning symbol – draws attention to risk of material damage.
Number	LOT symbol with a four-digit number represents the date of production.
	An explanation of these symbols can be found in the Disposal section of the instructions for use.
	Type B application component
	a) Cautionb) Hot Surface/Burn Hazard
	Manufacturer

General Safety Precautions

Danger

Always disconnect the plug from the mains socket in the event of faults, when changing the bulb, before cleaning and when the appliance is not in use. Never pull on the mains cable! Always disconnect the appliance from the power socket. Do not touch the lamp during operation or without first allowing a sufficient cooling period. Never immerse the appliance in water and do not allow it to come into contact with rain or other moisture! Should the appliance fall into water, disconnect the plug from the mains socket before removing the appliance from the water. Afterwards, do not use the appliance again before it has been checked by a member of authorised customer service personnel. This also applies if the mains cable or the appliance has fallen or been dropped. Place the appliance on a stable, level surface. Ensure an area of at least 80 cm of free space around the unit in order to avoid overheating.

Danger DangerC

Do not place the appliance on hot surfaces or near to heat sources and lay the caution mains cable in such a way that it does not come into contact with hot or sharp-edged objects.

Do not use the appliance whilst standing on a wet floor or if your hands or the appliance are wet.

Do not bend the mains cable and do not wind it around the appliance.

Do not leave the appliance unattended during operation. Use only proper extension leads. Do not operate the appliance outdoors, as this may subject it to rain or other moisture.

Do not operate the appliance outdoors, as this may bring it into contact with rain or other moisture.

Repairs are to be carried out only by authorised customer service personnel. Never attempt to open the appliance or e.g. to get into the inside using metal objects.

If the appliance is not used properly or if it is operated incorrectly, no liability can be accepted for any damage which occurs as a result.

This device is intended for use by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the device in a safe way and understand the hazards involved.

Children shall not play with the device. Cleaning and user maintenance shall not be made by children without supervision.

If the mains cable is damaged, it must be replaced only by a repair workshop nominated by the manufacturer (see guarantee card), in order to avoid any danger.

This appliance is designed solely for use in private households, not for commercial use.

Keep the operating instructions in a safe place and pass them on with the appliance.

Special Safety Precautions

When using infrared emitters

Danger

The unit must not be used for serious conditions (diabetes, skin cancer, heart disease, acute inflammation, multiple sclerosis, thrombosis, blood clotting problems), skin conditions or if seemingly harmless symptoms last too long! In such cases, consult a doctor. If you have taken painkillers or consumed alcohol, only use the appliance on your doctor's advice as your sensitivity to heat may be impaired.

Danger
The IR radiation of the unit can damage the cornea and retina. When using the appliance, always keep your eyes closed.

Danger

Do not use the appliance near to bathtubs, washbasins or other vessels containing water. There is a danger even when the appliance is switched off. Remove the plug from the mains socket after use.

Installing a residual-current protector with a nominal trigger current of no more than 30 mA offers additional protection. Contact your electrician.

Caution

Ensure that the voltage specified on the light bulb is the same as that of the local mains supply.

The housing becomes very hot when the appliance is switched on – danger of burns!

Heat sensitivity may be reduced after taking painkillers and anaesthetics, after local anaesthetic and by certain illnesses. In these cases, the distance must be at least 80 cm.

1) Use the infrared emitter only with a Philips R95 E27, 230 V, 100 W infrared bulb.
Do not use any other bulb and if any bulb is purchased subsequently, ensure that it is identical with the version supplied here.
2) Do not place any flammable objects in the area of irradiation: combs, spectacle frames etc. can catch fire and textiles may be singed.
3) Avoid sudden cooling (e.g. of the head) immediately after treatment.
4) Protect the lamp from strong impacts, including setting down harshly.
5) Remember not to put the appliance away immediately after switching it off, but allow it to cool first for a few minutes.
6) Disconnection from the mains supply is only guaranteed if the plug is removed from the socket.

Intended Use

The device is only intended for heat treatment of the human body. The infrared lamp is designed solely for use in private households and is not intended for commercial use. Any other use or modification to the appliance does not constitute an intended use and is fundamentally forbidden. No liability can be assumed for damage caused by use for purposes other than the intended use or in the event of improper operation.

Introduction

It is a long-known fact that heat is able to relieve discomfort and accelerate the healing process in many instances. The infrared lamp is a particularly effective source of this heat, with its infrared rays penetrating the skin deep into the underlying tissue.

Initial Use

Place the appliance on a level surface and insert the mains plug into a properly installed plug socket. The infrared lamp will be illuminated.

Danger

Irradiation Distance

The distance should be such that the heat is felt to be comfortable. Generally, the distance is 40 - 60 cm. Generally, the minimum clearance to 100 Watt appliances is 60 cm.

Irradiation Duration

The best results are achieved with a treatment of 2 x 15 minutes per day.

Heat treatment with infrared light

This device is intended for localised heat treatment.

Possible applications:

• Heat treatment to ease occasional muscle tension, stiff muscles and joints.
• Ideal for treating the neck, shoulder and lumbar region.

If no improvement is seen after 6-8 treatments, stop using the device and consult your physician.

Caring for Your Appearance

Healthy and cared for skin primarily demands sufficient circulation. Daily treatment with the infrared lamp proves time and again to be indispensable for beauty care, as this infrared heat has depth effect.

The skin also takes in cosmetic compounds more quickly if the infrared lamp is used before and after application. It makes no difference whether skin is dry and greasy.

Massage – The effect of massage is significantly increased by transitional or simultaneous infrared irradiation. The uscles are relaxed more. Bruising and the undesired build-up of fat disappear more quickly.

Important for the Sportsman

If the infrared lamp is used when participating in the various forms of sport, the blood flow is intensified.

The infrared lamp can also be used during a break, in conjunction with a massage, in order to relieve tiredness, muscle cramp and stiffness.

When Should I Seek Medical Advice?

For serious conditions (diabetes, skin cancer, heart disease, acute inflammations, multiple sclerosis, thrombosis, blood clotting problems), skin conditions or if seemingly harmless symptoms last too long, you should consult your doctor.

Cleaning

Always disconnect the plug from the mains socket before cleaning and allow the unit to cool completely before cleaning and storing it!

To clean the outside of the unit, use a dry or at most slightly damp, well-wrung cloth. Then dry it well. Do not use aggressive or abrasive cleaning agents.

If necessary, wipe off the cooled lamp with a dry cloth.

Lamp Durability

All appliances are subject to rigorous testing before leaving the factory. If you use the infrared lamp as described in these instructions, the performance will remain constant for the entire lifetime of approx. 300 constant operating hours (= approx. 1200 applications of approx. 15 minutes). The guarantee does not cover light bulbs.

Changing the Bulb

Before changing the bulb disconnect the plug from the mains socket. Only change the bulb when it is cool! When replacing the bulb, ensure that a bulb of the same type (Philips, R95 E27, 230 V, 100 W) is used.

Ambient Conditions for Transport/Storage

• Ambient temperature between -15°C and +40°C
• Relative humidity between 30% and 75%
  • Air pressure between 700 hPa and 1060 hPa

Repairing Possible Faults

95% of all complaints are unfortunately attributable to operating errors and can be easily remedied. If you are unable to remedy the problem using the troubleshooting list below, please contact our After-Sales Service by telephone or email. We would therefore ask you to contact us before sending your appliance to the After-Sales Service.

GB Irish Connection

c/o AVD

Unit 2

Finglas Business centre

Jamestown Road

Dublin 11

Tel.: 00353 (0) 879 962 077

E-Mail: [e-mail]

IAN 93141

You can remedy the following faults yourself:

Fault Cause		Remedy
- Appliance does not function.		> Not connected to the plug socket.	>> Insert mains plug into the plug socket.
		> Bulb is faulty.	>> Procure a replacement bulb of type Philips (R95 E27, 230 V, 100 W) and replace it as described in the operating instructions.

Disposal

The product packaging is made of recyclable materials.

The packaging material can be delivered to public collection points for recycling.

Old appliances must not be disposed of along with other household waste!

At the end of its service life, the old appliance must be disposed of in an orderly manner in accordance with the statutory regulations. The material used in the old appliance can then be recycled, resources conserved and the environment protected. More detailed information is available from the responsible local authority or local waste disposal company.

WARRANTY

We give a 3 year warranty on material and manufacturing faults in the product.

The guarantee does not apply to:

Damage caused by improper use

Parts subject to wear and tear

Bulbs

Faults that were known to the customer at the time of purchase

Damage caused by the customer

The customer's statutory warranty rights are not affected by the manufacturer's warranty. In order to make a guarantee claim within the period of the guarantee, the customer must produce proof of purchase. The warranty claim must be made within a period of 3 years from the date of purchase. In the event of a warranty claim, the customer has the right to have the product repaired in our own workshops or by workshops authorised by us. The customer is not granted any further right on the grounds of the warranty.

Irish Connection

c/o AVD

Unit 2

Finglas Business centre

Jamestown Road

Dublin 11

Tel.: 00353 (0) 879 962 077

E-Mail: [e-mail]

IAN 93141

Warranty card

Device/article designation IAN 783166/SRL 100 A1

Purchase date:

Description of fault:

Name:

Street:

Post code/City:

Telephone:

Fax:

Signature:

GB

Spis treści

Urządzenie 12

Producent 12

Dane elektryczne 12

51/2013 Ident. No. SRL 100 A1 1.05 Art. No. 210590