Vision Plus HR8907 - Vacuum Cleaner PHILIPS - Free user manual and instructions
Find the device manual for free Vision Plus HR8907 PHILIPS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Bagless canister vacuum |
| Brand | Philips |
| Model | Vision Plus HR8907 |
| Rated power | 2000 W |
| Dust capacity | 2 L |
| Filtration | HEPA 13 |
| Cord length | 5 m |
| Operating radius | 8 m |
| Telescopic tube | Yes |
| Floor nozzle | Yes |
| Carpet nozzle | Yes |
| Crevice tool | Yes |
| Furniture brush | Yes |
| Noise level | 78 dB |
| Dimensions (L × W × H) | 45 × 28 × 25 cm |
| Weight | 5.5 kg |
| Wheel type | Swivel wheels |
| Fill indicator | Yes |
| Automatic shut-off | Yes, in case of overheating |
| Washable filter | Yes |
| Maintenance | Clean filter every month |
| Included accessories | Floor, carpet, crevice, brush nozzles |
| Repairability | Spare parts available through Philips service |
Frequently Asked Questions - Vision Plus HR8907 PHILIPS
How to empty the dust container of the Philips Vision Plus HR8907 vacuum cleaner?
To empty the container, press the unlock button on the top of the container and remove it. Empty the contents into a trash bin, then clean the filter if necessary. Put the container back in place by snapping it until you hear a click.
How to clean the HEPA filter of the vacuum cleaner?
The HEPA filter is accessible by removing the container. Gently tap the filter over a trash bin to remove dust. If the filter is very dirty, you can rinse it with cold water and let it dry completely for 24 hours before putting it back in place.
What to do if the vacuum cleaner loses suction?
First check if the container is full or the filter is clogged. Clean the filter if necessary. Also check that the hose or nozzles are not blocked. Finally, make sure all connections are properly clicked in.
How to use the floor nozzle on carpet?
The floor nozzle is versatile and suitable for hard floors and carpets. Use the appropriate brush setting: for carpets, the brush should be in the extended position. You can adjust the selector on the nozzle.
Where to buy spare parts for the Philips Vision Plus HR8907?
Spare parts (filters, nozzles, hose) are available on the official Philips website or from authorized dealers. Use the model number HR8907 to find compatible parts.
How to put the filter back after cleaning?
Make sure the filter is completely dry and insert it into its compartment until it clicks. Put the container back in place. A poorly installed filter can reduce performance.
The vacuum cleaner stops suddenly, what to do?
This may be due to overheating. Turn off the appliance, unplug it and let it cool for 30 minutes. Check that the container is not full and the filters are not clogged. If the problem persists, contact customer service.
Can I use dust bags with this vacuum cleaner?
No, the Philips Vision Plus HR8907 is a bagless vacuum cleaner. It uses a transparent container and a washable HEPA filter. It does not require bags.
How to store the power cord?
The cord retracts automatically: press the cord rewinding button located on the back of the vacuum cleaner. Hold the cord with one hand and press with the other to wind it safely.
What is the noise level of this vacuum cleaner?
The noise level is approximately 78 dB, which is comparable to a standard vacuum cleaner. To reduce noise, ensure the filters are clean and the container is not obstructed.
User questions about Vision Plus HR8907 PHILIPS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual Vision Plus HR8907 - PHILIPS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Vision Plus HR8907 by PHILIPS.