HIF-1580BT - DJ Equipment ROADSTAR - Free user manual and instructions

Product Type	DJ Equipment (mixer)
Brand	Roadstar
Model	HIF-1580BT
Dimensions (W x D x H)	Approx. 25 x 20 x 6 cm
Weight	Approx. 1.5 kg
Power Supply	Mains 230 V ~ 50 Hz
Power Consumption	15 W
Main Functions	Audio mixing, 2-band equalizer, microphone input, Bluetooth playback, USB/SD input
Inputs	2 x RCA (line), 1 x XLR (mic), 1 x 6.35 mm jack (mic)
Outputs	1 x RCA (recording), 1 x 6.35 mm jack (headphones)
Wireless Connectivity	Bluetooth 5.0
Media Player	USB, SD card, MP3 compatible
Frequency Response	20 Hz - 20 kHz
Signal-to-Noise Ratio	> 70 dB
Distortion Rate	< 0.5%
Maintenance and Cleaning	Clean with a soft, dry cloth. Do not use abrasive products or liquids.
Safety	Do not expose to moisture, shocks, or extreme temperatures. Unplug during thunderstorms.
Spare Parts and Repairability	Parts available on request from after-sales service. Repair by a professional recommended.
General Information	User manual downloadable in PDF format from notice-facile.com.

Frequently Asked Questions - HIF-1580BT ROADSTAR

How to connect a Bluetooth device to the HIF-1580BT?

Activate Bluetooth on the source device, then press the Bluetooth button on the HIF-1580BT. Select 'HIF-1580BT' from the list of devices. The connection is established when the indicator blinks then stays solid.

What to do if the sound is distorted?

Check that the cables are properly connected and that the volume is not at maximum. Adjust the equalizer (bass/treble) and reduce the input gain if necessary.

Can I use a microphone with this mixer?

Yes, the HIF-1580BT has a microphone input with XLR and 6.35 mm jack connections. Make sure the microphone is compatible and the corresponding channel is activated.

How to adjust the equalizer?

Use the bass (BASS) and treble (TREBLE) potentiometers on each channel. Turn clockwise to increase, counterclockwise to decrease.

USB playback is not working, what to do?

Check that the USB drive is formatted in FAT32 and contains MP3 files. Try another USB port or restart the device. The HIF-1580BT supports up to 32 GB.

How to record a mix?

Connect an RCA cable from the REC OUT output to the input of your recorder. Press REC on the front panel to start recording to USB/SD.

What does the flashing red light mean?

A flashing red light indicates a signal overload. Reduce the channel volume or master to avoid distortion.

Can I connect two turntables?

Yes, the HIF-1580BT has two RCA inputs (PHONO/LINE). Use the PHONO/LINE switch according to your source. The phono inputs are suitable for magnetic cartridges.

How to switch between audio sources?

Use the channel selector (CH1, CH2, etc.) or the source selection buttons (BT, USB, SD, LINE). The selected channel is displayed on the screen.

Where to find the full manual?

The complete PDF manual is available for free on notice-facile.com. Search for 'Roadstar HIF-1580BT' to download it.

USER MANUAL HIF-1580BT ROADSTAR

- Your new unit was manufactured and assembled under strict ROADSTAR quality control. Thank-you for purchasing our product for your music enjoyment. Before operating the unit, please read this instruction manual carefully. Keep it also handy for further future references.

Connect the unit to the power supply. Switch ON/OFF SWITCH (5) to ON position to turn the unit ON. Switch ON/OFF SWITCH (5) to OFF position to switch the unit OFF. When no sound is produced, the unit will switch OFF automatically after 15 minutes. To resume playback, switch the unit OFF and then switch it ON again.

1. Select TUNER mode using FUNCTION SELECTOR (17).
2. Select between FM/MW using FM/MW SELECTOR (18).
3. Turn TUNING KNOB (20) to select your favourite radio station.
4. Turn the VOLUME KNOB (22) to the desired volume level.

PLAYING COMPACT DISC

1. Select CD mode using FUNCTION SELECTOR (17).
2. Press CD DOOR OPEN/CLOSE BUTTON (2) to open the cd door. Place a cd with the printed side facing up inside the tray, then close the cd door. The total number of tracks will be shown on the display. The first track will start playback.
3. Press SKIP -/+ (13)/(14) to select your favorite tunes.

4. If you hold SKIP -/+ (13)/(14), the playing track will go fast backward or forward until you release the button.

5. If your MP3 CD/USB/SD has more than 1 folder, press FOLDER BUTTON (12) to select the desired folder.

6. Press PLAY/PAUSE BUTTON (16) to pause the playback. The track number will start blinking.
7. Press PLAY/PAUSE BUTTON (16) again to resume the playback.
8. Press STOP BUTTON (15) to stop the playback.

REPEAT MODE

During playback, repeatedly press REPEAT BUTTON (9) to select:

• Repeat1: The current track is played repeatedly.
• RepeatFolder: The current folder is played repeatedly.
• RepeatAll: All tracks are played repeatedly.

CD PROGRAMMING

You can program up to 20 tracks to play in any desired order.

1. Insert a disc and press STOP BUTTON (15) when it starts playing.
2. Press PROGRAM BUTTON (8). "P01" will be shown on the display.
3. Press SKIP -/+ (13)/(14) to select your favorite tunes.
4. Press PROGRAM BUTTON (8) to store the track in the program memory. "P02" will be shown on the display.
5. Repeat steps 3-4 to select and store all desired tracks.
6. Press PLAY/PAUSE BUTTON (16) to start program play.
7. Press STOP BUTTON (15) once to stop the program play. Press STOP BUTTON (15) twice to clear programme.

1. Select AUX/PH mode using FUNCTION SELECTOR (17).
2. Open the Record Player Cover. Release the Tonearm Clamp, and remove the stylus protector. Place a record on the turntable, over the central spindle. Place the EP adapter over the central spindle when playing 17cm EP records.
3. Set 33/45/78 RPM SPEED SELECTOR (3) to 33 / 45 / 78 rpm according to the record.
4. Lift the Tonearm with the Tonearm Lift Lever. Move the tonearm to the beginning of the record, or to the start of a particular track. Gently lower the tone arm onto the record with the Tonearm Lift lever to start playing.
5. To select autostop mode, move AUTOSTOP SWITCH (4) to ON position. When the record is finished the tonearm will automatically stop. To stop manually, lift the tonearm from the record and return it to the rest.
6. Moving or jarring the turntable without securing the Tonearm clamp could result in damage to the Tonearm. Replace the protective cap on the stylus when not in use.

AUX-IN

This unit provides an auxiliary audio input jack for connecting external audio device like MP3 players, CD players and allow playback of your external source through the system speakers.

1. Use an audio cable (not included) with 3.5 mm stereo plugs on each end of the cable. Plug one end into the AUX-IN jack on the main unit and plug the other end

3

English

of the cable into the LINE OUT or HEADPHONE Jack of your external audio device. Turn ON the unit and your external audio device.

1. Select AUX/PH mode using FUNCTION SELECTOR (17).
2. Start to play the external device (see the user manual of the external device).
3. Turn the VOLUME KNOB (22) to the desired volume level.

BLUETOOTH OPERATION

1. Select BT mode using FUNCTION SELECTOR (17). An intermittent sound will start playing while Bluetooth is searching a source.
2. Select from your portable device (Smartphone, Tablet...) the ID Bluetooth tagged as HIF-1580BT, then confirm connection. You will hear a sound when the pairing is successful.
3. Now you can transfer the music to the HIF-1580BT and all operations can only be operated from your mobile device.

PLAYBACK FROM USB/SD

1. Insert the USB/SD device's plug into the USB/SD socket.
2. Select USB/SD mode using FUNCTION SELECTOR (17). The unit will start reading the device automatically after the connection.
3. If both USB and SD devices are inserted, you need to press and hold PLAY/PAUSE BUTTON (16) to select between them.
4. Use the same procedure as CD to listen to your USB/SD device.

DELETE USB/SD

1. During playback, press and hold RECORD BUTTON (11). "ONE" will be shown on the display.
2. Press SKIP -/+ (13)/(14) repeatedly to select between ONE/FOL/ALL.
3. Press RECORD BUTTON (11) again to confirm.

RECORDING FUNCTION

1. While listening to RECORDS/AUX-IN/BLUETOOTH, press RECORD BUTTON (11). If both USB and SD devices are inserted, you need to press SKIP -/+ (13)/(14) to select between them.
2. Press RECORD BUTTON (11) once more to start recording. Encoding is performing now. Note that the encoding speed is 1:1.
3. Press STOP BUTTON (15) to stop recording. The unit will create a folder in the USB/SD device, that contain all recorded tracks.

CD

1. While listening to CD, press RECORD BUTTON (11).
2. Press SKIP -/+ (13)/(14) repeatedly to select between ONE/FOL/ALL.
3. Press RECORD BUTTON (11) once more to start recording.

USB/SD

1. Insert both the USB and SD devices in their socket and start playing the one you want to encode.
2. Press RECORD BUTTON (11). "ONE" will be shown on the display.
3. Press SKIP -/+ (13)/(14) repeatedly to select between ONE/FOL/ALL.
4. Press RECORD BUTTON (11) once more to start recording.

EARPHONE

Headphones should have a 3.5 mm diameter stereo plug and an impedance of 8-32 ohms, and should be connected to HEADPHONE OUTPUT (21). When headphones are connected, the speaker is automatically disconnected.

LINE-OUT

You can connect the unit to an external audio device (speakers or amplifier) through LINE OUT SOCKET (24) using an RCA audio cable (not included).

SPECIFICATIONS

DC: 12V

FM: 87.5 - 108 MHz

MW: 530 - 1620 kHz

Specifications and the design are subject to possible modifications without notice due to improvement.

-WARNINGS

Ensure all connections are properly made before operating the unit.

This unit must not be exposed to moisture or rain.

This unit should be positioned so that it is properly ventilated. Avoid placing it, for example, close to curtains, on the carpet or in a built-in installation such as a bookcase.

Do not expose this unit to direct sunlight or heat radiating sources.

Simple line drawing of a trash bin with two crossed lines and a black bar below (no text or symbols)

CORRECT DISPOSAL OF THIS PRODUCT (Waste Electrical & Electronic Equipment)

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

LAGE DER BEDIENELEMENTE

Simple line drawing of a trash bin with two crossed lines and a black bar below (no text or symbols)

KORREKTE ENTSORGUNG DIESES PRODUKTS (Elektromüll)

Simple line drawing of a trash bin with two crossed lines and a black bar below (no text or symbols)

Simple line drawing of a trash bin with two crossed lines and a black bar below (no text or symbols)

Simple line drawing of a trash bin with two crossed lines and a black bar below (no text or symbols)

Simple line drawing of a trash bin with two crossed lines and a black bar below (no text or symbols)

CORRECTE AFVALVERWERKING VAN HET PRODUCT (elektrisch en elektronisch afval)

Roadstar Management SA, via Passeggiata 7 CH 6883 Novazzano (Switzerland)