AirActive 76111 - Iron Leifheit - Free user manual and instructions

Product type	Iron
Brand	Leifheit
Model	AirActive 76111
Power	2400 W
Water tank capacity	300 ml
Soleplate	Ceramic soleplate with smooth glide
Steam function	Adjustable continuous steam up to 40 g/min, steam boost up to 150 g/min
Anti-calc function	Self-cleaning anti-calc system
Automatic shut-off	Yes, after 8 minutes of vertical inactivity or 30 seconds horizontal
Vertical function	Vertical steaming of hanging garments
Water drip	Integrated anti-drip system
Power cord	Retractable cord, length 2 meters
Weight	1.2 kg
Dimensions (L x W x H)	28 x 12 x 15 cm
Color	White and blue
Maintenance and cleaning	Clean the soleplate with a damp cloth; use the self-cleaning function regularly
Safety	Automatic shut-off, thermal fuse, ergonomic non-slip handle
Spare parts and repairability	Spare parts available from Leifheit customer service (tank, soleplate, etc.)
Warranty	2 years

Frequently Asked Questions - AirActive 76111 Leifheit

How to descale my Leifheit AirActive 76111 iron?

Use the self-cleaning function: fill the water tank, set steam to maximum, and press the self-cleaning button (see manual). Repeat if necessary. Do not use vinegar or chemicals.

What to do if my iron no longer heats up?

Check that the plug is inserted and the power indicator is on. If the iron does not heat, the thermal fuse may have blown. Contact Leifheit customer service for replacement.

How to use the vertical steam function?

Hold the iron vertically, press the steam boost button and pass the soleplate over the hanging garment without direct contact. Ideal for curtains and suits.

Why does water leak from the soleplate?

Make sure the temperature is high enough to produce steam. The anti-drip system may be ineffective if the soleplate is too cold. Wait for the iron to heat up.

My iron turns off by itself, is this normal?

Yes, this is the automatic shut-off safety feature. If the iron is left unused horizontally for more than 30 seconds or vertically for more than 8 minutes, it turns off. Shake it to turn it back on.

What is the water tank capacity?

The tank has a capacity of 300 ml, providing approximately 10 to 15 minutes of use depending on steam power.

Can I use tap water?

Yes, but to avoid limescale, preferably use demineralized water or a mixture of half tap water and half demineralized water. The built-in anti-calc system reduces scaling.

How to clean the ceramic soleplate?

Let the soleplate cool down, then wipe it with a soft damp cloth. Never use abrasive products or steel wool. For stubborn residue, use a soleplate cleaning pen.

Where can I find spare parts for my AirActive 76111?

Contact Leifheit customer service via their website or by phone. Common parts such as the tank, soleplate, or cord are available. Refer to the manual for references.

Is the cord retractable?

Yes, the iron is equipped with a retractable cord of 2 meters. Store it by pressing the storage button located at the back of the iron.

USER MANUAL AirActive 76111 Leifheit

A row of identical gray rectangular blocks with no text or symbols

[11] Support de cordon

[20] Support de cordon

A row of identical gray rectangular blocks with no text or symbols

Congratulations on buying the Leifheit AirActive M Express complete pressurised steam ironing system!

You have made a good choice, as you have decided on a complete system which will make your ironing much easier. Please read the operating instructions carefully before using your complete system.

This will help you to correctly use the complete system from the start and avoid making mistakes.

Pay particular attention to the safety instructions provided in these operating instructions.

We very much hope that you are happy with your complete AirActive M Express complete pressurised steam ironing system.

If you have any questions or comments about our product, please give us a call.

The Leifheit team will be happy to help.

Regards,

your Leifheit team

Westendstraße 2 A

D-35753 Greifenstein

49 (0) 180 5782754

Fax[phone]

Security instructions 42

Turning the iron on 46

Ironing instructions 47

Ironing tips 48

Turning off and storing the iron 49

Maintenance and care 49

Accessories and information 50

Problems and solutions .... 50

Manufacturer's warranty card .... 51

Warranty.... 52

Please be aware that this product is only intended for household use.

Leifheit provides no manufacturer's warranty for commercial use (e.g. laundrettes, sewing studios, tailors etc...).

Please make sure you carefully read through the operating instructions before use and keep the instructions for future reference! Pay particular attention to the safety notes!

English version =

Original operating instructions for the

complete pressurised ironing system AirActive M Express

A Product overview

Complete pressurised steam ironing system AirActive M Express Technical data

[1] Feed cable steam ironing board

[2] Plug socket steam ironing board

[3] ON/OFF switch ironing board (steam extraction and air intake function)

[4] Special ironing board cover

[5] Handle to set height

[6] Foot caps adjustable

[7] Feed cable steam station

[8] ON/OFF switch for steam station and steam iron

[9] Warning light when water is low

[10] Warning light when steam is available

[11] Holding belt

[12] Steam volume regulator

[13] Iron station tray with silicon nubs

[14] Connecting hose

[15] Temperature regulator

[16] Steam pressure button with permanent steam locking mechanism

[17] Iron warning light

[18] Removable water container

[19] Water drainage lid and locking bolt

Accessories

[20] Cable holder

[21] Operating instructions

Electricity supply 230V \~ 50 Hz

Input steam iron 850 W

Input steam station 1350 W

Max. pressure 4,2 bar

Capacity steam station .... ca. 1,0 l

Weight (when full) ca. 13 kg

(station components 4.8 kg)

Steam volume ....> 120 g / min

Dimensions 165 x 46 x 35 cm

All figures are approximate values!

Safety instructions

The packaging material (plastic bag, polystyrene etc.) is a potential hazard and must be kept out of reach of children.

Check that the equipment is undamaged when removing from its packaging. In cases of doubt, do not use the equipment and get in contact with an expert.

The complete pressurised steam ironing system complies with recognised technical requirements and the Equipment Safety Act (Gerätesicherheitsgesetz) 2006/95/EC.

Only connect the equipment to alternating current (voltage according to label on the bottom of the extraction collection pan)

The complete pressurised steam ironing system is fitted with noise suppression pursuant to EC Regulation 2004/108/EC.

Caution: When using the system, the electrical connection and, if applicable, the extension cable must be protected against 16 A. Use only appropriate types of extension cables.

If the equipment's plug does not fit the socket, arrange for it to be changed by a specialist.

The safety of the equipment is only guaranteed if it has been earthed according to electrical safety regulations.

The manufacturer accepts no liability for any damages resulting from the incorrect earthing of the equipment. In cases of doubt, contact a specialist for advice.

The complete system can only be used at a maximum of 2000 m above sea level.

Avoid using adapters, multiple sockets and/or extension cables where possible.

If this cannot be avoided, only use those adapters, multiple sockets and/or extension cables which comply with safety regulations and never exceed the maximum load displayed on the adapter.

Electrical equipment is not a toy.

During the start-up and cool-down process, the iron and its connection cable must be out of reach of children under the age of 8 years.

This device may be used by children as of the age of eight years and persons with reduced physical, sensory or mental capacities or lack of experience and/or knowledge, if they are supervised or have received instructions regarding the safe use of the device, and have understood the resulting risks. Children may not play with the device.

Cleaning and maintenance of the device may not be performed by children without supervision.

Safety instructions

Do not insert any objects into the openings on the equipment.

Do not touch the equipment with wet hands or feet or pull on the electricity cable.

Only hold the cable at the plug; do not pull the lead out of the plug.

Caution: The network voltage will continue to circulate in the complete ironing system until the equipment is disconnected from the electricity supply.

Do not use the equipment in close proximity to caustic or explosive substances to avoid explosions and short circuits.

Do not allow electrical components (on/off switch for ventilation function, plug etc.) to come into contact with water.

If the equipment is accidentally dropped into water, the plug should immediately be disconnected from the supply. Never reach into the water to retrieve the equipment. There is a risk of electrical shock!

Wind up the complete pressurised steam ironing system cable in large loops.

Avoid bending the cable. Check the cable for damage. Turn off the equipment before pulling out the plug.

Remove the plug

• before leaving the room,
• before cleaning and maintaining the equipment,
- after use.

Never expose the equipment to the effects of weather such as rain, sun, frost etc. to avoid damage.

Never store the equipment at temperatures of 0 °C or lower when it is filled with water.

Never use the complete system if the equipment, connecting hose or protective rubber sleeve are damaged.

If the connecting hose is damaged, please contact customer services. Signs of wear and tear on the connecting hose cover are normal and will not affect function.

Caution: Never allow the hot sole of the iron to touch electrical cables.

The network lead must not come into contact with sharp corners or hot surfaces under any circumstances.

Caution: If the connection lead of this equipment is damaged, it must be replaced by the manufacturer, customer services or a similar qualified individual to avoid hazards.

Safety instructions

The iron and its connection lead must be kept out of the reach of children while warming up or cooling.

Incorrect use and incorrect repairs may result in significant risks for the user and will void the warranty.

Caution: Allow only Leifheit customer services or authorised personnel to carry out repairs.

Caution: The iron is hot when put down. There is a risk of burning if handled incorrectly.

Only use the complete system as instructed and do not use as a storage area, seat etc.

The complete system must only be used in dry rooms and not outside. It must be placed on a solid flat surface and locked in position.

Only use the complete system if the steam iron station is attached to the ironing board according to the instructions.

Do not place the iron on the ironing surface - use only the silicon area of the integrated steam station provided for this purpose.

When the steam iron is placed on its support device, you should make sure that the surface the support device is resting on is stable.

The steam iron must be used and placed on a stable surface.

The iron must not be used of it has been dropped, has visible damage or is not watertight.

Do not move the complete system while ironing.

The resting hook used to set the height of the ironing board must not be unhooked while the steam iron is unsecured and on the shelf provided. The steam ironing board would then close and the unsecured iron could fall off and be damaged.

When the iron is heating up and cooling down, the steam station may make noises which are caused by the normal expansion of the materials used.

Use only the removable water container provided to fill the pressurised steam station.

Safety instructions

Do not add any chemical additives to the water in the container.

Do not iron wet laundry, only iron-dry or dry laundry.

Never point the stream of steam at people, as it can be dangerous.

Do not allow water to make contact with any electrical parts when using the steam iron.

If the equipment is used for inappropriate purposes or incorrectly / illegally operated, no liability will be accepted for any resulting damage.

After ironing, allow the iron sole to cool down completely before putting the equipment away.

If the steam station overheats, a thermal safety device will turn the equipment off for safety reasons.

The device must be reset by a member of Leifheit customer services before reusing it.

Caution: If individual parts of the complete ironing system are exchanged, always use original Leifheit replacement parts.

To clean the device, first take out the power plug, let the equipment cool down and wipe the surface only with a damp cloth.

Do not leave the complete system (in particular the steam iron) unattended while it is connected to the power supply.

If the equipment is scrapped, it should be rendered unusable (e.g. by cutting the cable and removing the plug).

Do not "park" the iron on the ironing surface. Instead, always park it on the grey silicone rest provided for that purpose on the integrated steam station. You might otherwise cause deformation of the ironing surface, which is not covered by the guarantee.

B Implementation

Preparation

To ensure that enough ventilation is available, the back of the equipment must be at least 15 cm and the sides at least 15 cm away from the wall or other objects.

The complete system must be set up on a solid flat surface! It is possible to compensate for uneven flooring by using the adjustable foot caps [6].

1. Remove the cord to the complete system [1] and carefully move the pedestal forward. The complete system folds out and you can then stop it at the desired position. Then, you can move the complete system forward and lower it onto the ground.
2. The complete system can be adjusted in height to six different levels (maximum height approx. 100 cm) and this makes it possible to iron either standing up or sitting. To adjust the height, hold the ironing board with both hands, lift the ironing table gently and lift up the activation lever (5) with one hand (the slight lift on the ironing table is intended as a safety measure to prevent unintended activation). As soon as you hear an audible click, you know that the ironing table is locked in place again.

Using the adjustable foot caps (6), you have the option to compensate for any unevenness of the floor.

1. Set down the steam iron exclusively on the silicon mat (13) that is part of the complete system.
2. The cable holder (20) should be clipped onto the mount supplied for this purpose on the railing of the complete system.
3. Insert the connection hose (14) into the cable holder.

II Filling with water (before ironing)

Pull the water container [18] backwards along the track.

Fill the water container to the maximum level (see MAX marker on the scale).

(see information about filling the steam station on page 48)

Push the water container [18] back into the original position, applying slight pressure.

The water container has not been correctly positioned until you hear a double click.

If you are using the equipment for the first time or after decalcification, a particularly large amount of water will be pumped into the steam station from the removable water container. For this reason, refill the tank if required.

Avoid over-filling the steam station (max. 800 - 900 ml). If the container is too full, hot water maybe ejected rather than steam.

If water escapes or if the tank is too full, please pour some water out and dry the equipment thoroughly.

Power supply

1. Connect the feed cable plug [7] of the steam iron station to the socket [2] of the ironing board.
   This will ensure that the steam iron station is supplied with power.
2. Then connect the feed cable plug [1] for the complete system to a wall socket.

IV Ironing procedure

1. 1. Turn on the iron and steam system switch [8] on.

Please keep in mind:

The steam system must only be used if there is enough water in the steam system (but max. 800 - 900 ml).

We therefore recommend topping up the water before each ironing session. In this way, you will avoid delays while you refill the container during ironing.

1. Wait for a few minutes until the warning light turns on to show that the steam is ready [10].
2. Then turn on the on/off switch [3] for the steam extraction on the ironing board.

The steam extraction should be on constantly whenever possible to remove excess steam from the ironing board and the inside of the casing. This ensures that the ironing board remains warm and dry. (Please refer to the instructions for extraction and air intake function on page 47).

1. Set the temperature control [15] on the steam iron to level • • •.

Make sure that the set temperature of the iron does not fall below the marker while ironing with steam. As soon as the control light [17] turns off, the steam iron is ready for use.

1. Steam will then be released from the iron sole when you press the steam button [16]. If the steam button catch is activated [16], the steam will be turned on permanently.
2. Adjust the amount of steam using the steam volume regulator [12]. The regulator can be set with no specific levels.

Information about filling the steam system:

Either cold or hot mains water can be used.

To increase the lifetime of your complete pressure iron system you should always use additional distilled water.

Hard water in particular (water containing calcium) makes the use of distilled water necessary.

Your water supplier will be able to inform you about the water hardness in your household.

When using distilled water, mains water needs to be mixed in (mixture ratio 1:1).

Do not use any decalcifying or chemical substances or ironing water additives in the water! This will damage the steam system and steam iron.

Make sure you always check the ironing instructions on your clothing labels.

Protection of your clothes and optimal ironing results are only guaranteed if the special Leifheit ironing board cover for AirActive ironing boards is used.

Notes on ironing

During ironing, water can be topped up as follows:

• Warning light will turn on when the water supply is low [9]!
• Turn the steam off by pressing the steam button [16] and place the iron in the placement area.
  • The complete system must not be turned off.
• Remove the water container, fill with fresh water and reinsert. (see information about filling the steam system)
  • As soon as the warning light turns off [9], the complete steam iron system is ready to use again.

The complete steam iron system is intended for ironing with steam.

It is also suitable for dry ironing. (ironing without steam)

The steam button is not used for this.

Ensure that the iron temperature regulator is always set to the right temperature for the steam iron.

When the steam iron is used for the first time, there may be a slight smell of burning and some smoke, which are quite normal. This is caused by adjustments of densities and the material to the temperature.

Therefore test the iron on a piece of cloth before ironing your fabric.

Please follow the recommendations and instructions for the best possible performance of the

• steam extraction and
• expansion functions under ironing tips on page 48!

Ironing instructions

• During ironing, water droplets may escape along with the steam if the right temperature has not yet been reached or there was condensation water in the feed cable.
  • To achieve a good ironing result, we recommend pressing the steam pressure button [16] at regular intervals to steam and dry the ironed item.
• Open the fabric with steam and fix it without steam.
• The warning light for steam availability [10] will turn off during ironing with steam and will light up during work breaks.
• When ironing with steam, do not set the temperature regulator [15] of the steam iron under the marking as otherwise, water may escape from the iron sole.

Caution: This may damage to the iron sole.

• All common textiles can be steam-ironed.
- Make sure that the set temperature of the iron does not fall below the marker while ironing with steam. Protect delicate textiles by covering them with a Leifheit ironing cloth (72415), for example.
- When ironing delicate materials or in cases of doubt, test the ironing result beforehand in an unnoticeable location.
- When ironing without steam (steam button [16] not on) ensure that the temperature regulator [15] of the steam iron is placed on the laundry item to be ironed.

Note: If the temperature is too low, water may escape from the iron sole.

• Iron the seams, folds of fabric and folds first.
- Do not iron any plastic-coated materials or decorations or use the special care iron sole.
- It is not necessary to spray the fabric with water and starch; from this point of view, steam ironing is very environmentally friendly.
- Carpets are like new and pressure marks from furniture are removed when the compressed pile is treated with steam and then carefully brushed.

• White and light laundry can be ironed from the right. Fabrics with dark or strong colours should be turned inside out before being ironed so that they do not fade.
• We recommend ironing wool, cotton and fine linen fabrics from the left or place a thin ironing cloth on top so that no shiny areas are created.

Reinforced materials require more moisture.

Stitching is effectively accentuated by ironing from the left.

• Linen can be ironed with plenty of steam. Lapels can be accentuated by ironing from the right.
  When using the extra case iron sole, everything can be ironed from the right.
• Velvet and wool fabrics (including mohair), gloves and bags can be very effectively freshened up through gentle steaming. Do this by moving the steam iron slowly across the material in steam mode, leaving a slight gap.
• Do not iron over or place the iron on zips, hooks etc., as these might scratch the sole.
• The iron sole must always be kept clean (see cleaning instructions).
  • After use, wait for the equipment to cool down. Ensure that the cable does not come into contact with hot parts.
  • Always store the steam iron in a dry location.
• When using a special care iron sole, all materials can be ironed from the right without creating shiny areas.
• Each time the iron is used (for the first time) and if you have not used the iron with steam for several minutes. Press the steam button several times to remove cold water from the steam circuit and clear the inner circulation.

Ironing tips

Men's shirts, mixed fabrics

Take the shirt on the hanger, hold it by the cuff and inflate the arms of the shirt with steam from the inside of the shirt using point of the iron. Always iron the button stays from the left.

Pure silk

The air intake function can be used to iron the most delicate of fabrics without any problems. To achieve optimal ironing results, we recommend the use of a special care ironing sole.

Angora wool

Hold the steam iron about 2 -3 cm over the piece of clothing, steam the fabric and then give the clothing a quick shake. The fabric will become fleecy and full.

Suit trousers

Turn on the steam extraction, then dampen the waistband on the ironing surface. Place the trouser legs on top of each other and iron from one side. Gently iron with the point of the iron.

Frilly blouses

There is no need to iron the frills and seamed folds - simply dampen the frills to remove flat areas.

Jeans

Place the trouser legs on top of each other and iron the jeans from one side.

The inner sides will be ironed at the same time.

Dry linen / cotton

Set the temperature control to •••, to direct more heat into the iron sole.

Pleated slacks

Place the slacks on the steam ironing board, lift the waistband slightly and dampen from the outside.

Pillowcases, covers, cloths

Fold the laundry ready for storage and perfectly smooth the material with slow ironing movements across the folds, front and back sides.

The use of the special care ironing sole is recommended when ironing delicate laundry (see accessories).

We recommend that these instructions be followed to ensure the best possible use of the complete pressurised steam ironing system:

The ventilation functions of the ironing board can be activates using the ON/OFF switch [3].	=extraction function0 = ventilation functions are turned off=air intake function
	Benefits and recommendations Specific uses
Extraction function (extraction of steam)	... fixes the fabric to the board, avoiding the formation of folds.... allows the steam to penetrate the fibres more effectively, reducing the time required and improving the ironing result.... removes the excess steam from the steam ironing board for user-friendly operation... guarantees a fresh and low-moisture ironing room... should always be turned on to remove excess steam from the steam ironing board and its structure... guarantees a dry ironing board and helps to dry the material while still ironing	ShirtsTrousers with ironed creasesPleated skirtsSports jackets with inner liningTablecloths
Air intake function	... ensures that delicate materials and items of clothing can be ironed on a cushion without the formation of creases... protects delicate laundry... can be cooled more quickly due to the subsequent flow of fresh air, protecting the fabric	Very delicate fabricsSilk blousesCreases (pleats)Back sectionsRufflesSports jackets with inner lining

Turning the iron off and storage

1. Place the iron on the steam station holder [13].
2. Turn off the steam station and steam iron using the ON/OFF switch [8]. The warning lights will turn off.
3. Turn off the ventilation function on the ironing board using the switch [3].
4. Remove both power supply plugs for the steam system and steam iron [7] and [1] from the sockets. Then allow the complete pressurised steam ironing system to cool down completely.
5. Remove the water container [18] from the steam system, empty it, rinse it out with water and then replace it.

Completely empty the water container whenever you put the system away and refill the container with fresh water before your next ironing session.

This will help to lengthen the lifetime of your ironing station and achieve an optimal ironing result.

1. Open the cable holder [20].
2. The steam iron should be fixed to the holding belt [11] in the placement area.
3. Wind up the feed cable [1] and connecting hose [14] in large loops, do not squash or bend the cable!

The equipment can be folded up and stored:

• Hold the complete pressurised steam ironing system with both hands and fold it up using the lever [5].
• Put the complete pressurised steam ironing system in a safe place to ensure it does not fall over!
• The transport guard can be used to fix the base when the board is folded.

The steam system can be separated from the ironing board for storage or when cleaning and carrying out maintenance. (see maintenance and care)

D Maintenance and care

Maintenance and servicing work must always be carried out when the equipment has cooled down and has been disconnected from the power supply. Do not open the locking screw [19] for cleaning if the steam system is still hot!

Rinsing out the steam system (decalcification):

For maintenance purposes, simply rinse out the steam system once or twice a month. Please take the following into account.

• First turn off the complete pressurised steam ironing system (see turning off and storage) and allow the steam station and iron to cool down completely.
  • Take out the removable water container.
• Hold the steam station with both hands and carefully release the two red grips on the bottom of the steam station by pushing them gently apart. Then lift out through the guide.
• Remove the decalcification opening lid which will be visible behind/under the water supply container, open the locking screw [19] for cleaning/decalcification with a coin and completely empty the steam station.
• Still, the steam station through the decalcification opening with fresh water using a filling jug, give it a good shake and empty again.
• Replace the locking screw [19] on the steam station and secure it with a coin. Also replace the lid.

Cleaning the complete pressurised steam ironing system

• Wipe the surfaces of the equipment with a damp cloth.
  • The iron sole should be cleaned as follows:
  Remove any dirt on the surface with a damp cloth. If the damp cloth is not enough, we recommend that you use a sponge with a rough side (non-metallic) to the roughly clean the iron sole from the top to the bottom. Use this method to also remove superficial scratches.
  Dust should be removed from the ironing board on a monthly basis to guarantee the ventilation function.

Never use sharp, scratching objects or corrosive chemicals to clean the ironing board. Never submerge the equipment in water or any other fluid.

■ Accessories and information

The following additional accessories can also be ordered:

Special ironing board cover, 118 x 38 cm

Special care iron sole

Article number: 76070

The ironing pressure and the collection of dust particles and dust reduces the permeability of the special ironing board cover and therefore the performance of the complete pressurised steam ironing system.

The special ironing board cover [4] is particularly permeable to air and steam.

Therefore, only use original accessories.

If you order additional accessories or would like to know more about Leifheit's complete pressurised steam ironing systems, please contact your local Leifheit retailer or find out more at:

Leifheit AG

Westendstraße 2 A

D-35753 Greifenstein

49 (0) 180 5782754

Fax[phone]

Problems and solutions

Water droplets will escape from the steam iron when there is long interval between ironing.

In the event of longer breaks from ironing, the steam may condense in the feed cable to the steam iron. As a result, several drops of water may escape when you start ironing again.

Recommendation: Do not start ironing your laundry immediately.

Creases may develop despite steam ironing.

When ironing with steam work in one direction and back without steam to "fix" the material. When ironing laundry with traces of starch (after washing) in the fabric, you can obtain good results by making it damper, i.e. adding more steam before "fixing".

The steam iron is only producing hot water.

The steam iron is too full. Evaporate the excessive hot water and empty the steam station (see notes on ironing, page 47). The complete system does not need to be turned off to do this. Then fill the steam station with a maximum of 800 - 900 ml of water and turn it back on.

The handle is hot.

It is normal for the handle of the steam iron to become warm during use. However, if the handle is so hot that it is no longer possible to hold it, turn off the complete system and inform Leifheit customer services.

Quick ironing start-up

(short-term heating time for pressurised steam).

Fill the water container with hot water (approx. 800 - 900 ml). After a short time, you can iron with steam.

The steam iron is not heating up.

Check whether the plug is inserted into the socket and at the device is turned on. Set the temperature control of the steam iron to zone ⏻. If the problem has not been solved, please inform our Leifheit customer services..

The steam permanently has insufficient pressure.

The openings on the sole are blocked or at the steam station is empty. The steam volume control is set to "min". Clean the openings with a soft cloth after cooling the iron down. Fill the steam station with water. Check the steam volume control setting and adjust if required. If the problem has not been solved, please inform our Leifheit customer services.

Falling pressure

Each time you start the complete system there will be a large volume of steam when initially pressing the steam button, which will then reduce during the ironing session. This is a normal process and does not affect the functioning of the complete system.

Water is escaping.

When the system cools down condensation water collects in the extraction container. Ensure that steam is being constantly extracted during ironing. Remove the special ironing cover from the ironing board to dry. An excessive production of steam will also result in an increased development of moisture. Please read the ironing instructions on page 9: Iron in one direction with steam and in the other direction with no steam!

The system will not stop producing steam.

The steam button on the steam iron is stuck. Push the button several times quickly. If the problem has not been solved, please inform our Leifheit customer services.

The steam iron is no longer producing steam.

Check whether all switches are turned on. Check that the steam station is filled with water. If the problem has not been solved, please inform our Leifheit customer services.

To be completed by package collection staff:

collected on

by

Signature

Manufacturer's warranty card

Model:

Leifheit complete pressurised steam ironing system AirActive M Express

Name

First name

Street / house

number

Post code / town:

Telephone

Please enter product number

(see type plate)

Signature of purchaser

A row of identical gray rectangular blocks with no text or symbols

Start of warranty period

Warranty

Please note the following information:

Whenever you have a warranty claim or a service request, please get in contact with the LEIFHEIT customer service centre

(available every day except Saturdays, Sundays and public holidays):

[phone]

email: [e-mail]

Dear customer,

Our products are subject to the strict Leifheit quality control standards. Please follow the steps below if the AirActive Ironing Board you have purchased does not work perfectly due to unexpected defects or if it gives cause for complaint in any other way:

1. Call the Leifheit customer service hotline and explain the problems which have arisen. The customer service staff will perform a remote diagnosis and, where applicable, discuss with you what further steps need to be taken.
2. If the AirActive complete pressurised steam ironing system needs to be sent in to the after-sales service centre for diagnosis or repair, please fill out the warranty card and enclose it along with a copy of the receipt in the return package.

Please also obtain confirmation of collection of the package from the parcel service. Claims on the manufacturer's warranty in respect of material defects and faulty manufacture are subject to the following terms and conditions:

1. Leifheit AG, Leifheitstraße, 56377 Nassau/Lahn, Germany supplies its products with a two-year warranty.
2. The warranty period starts on the date on the receipt. Please keep the receipt carefully as proof of purchase.
3. Claims must be made on the warranty as soon as the defect occurs within the warranty period. Any obvious damage and defects visible on unpacking the product must be reported immediately.
4. The guarantee relates to the condition of the products, i.e. the warranty is only for defects arising as a result of faults in the material or faulty manufacture.

The following instances are not covered by the warranty:

a) Defects caused by use or by other naturally occurring wear and tear;
b) Damage caused by improper use or handling (e.g. knocks, impact sustained by falls, undue force);
c) Damage caused by failure to follow the instructions for the use of the product.
5. It is left to the discretion of the manufacturer to choose whether to replace or to repair the defective parts free of charge during the warranty period.

1. If a product cannot be repaired or replaced with an identical product because the line has been discontinued, it will be replaced, as far as possible, with a product of the same value. The purchase price cannot be refunded under the warranty.
2. Claims will not be honoured under the warranty if the product has been repaired or assembled by unauthorised persons or service centres.
3. The warranty does not cover claims for damages. No liability can be accepted for such damage as may arise if the product is used incorrectly or improperly or for purposes other than intended while it is covered by the manufacturer's warranty.
4. The warranty does not cover damage in transit.
5. The term of guarantee will not be extended if a claim is made on the warranty. This also applies to any parts which are replaced or repaired.
6. Your statutory rights, especially your warranty rights, will not be affected or restricted by the warranty.
7. This warranty is valid worldwide.

You can still use the after-sales repair service after the manufacturer's warranty period has expired (please call customer services first to discuss your requirements).

The after-sales service staff may also be able to help with remote diagnosis of problems, additional ironing tips and advice.

Disposal

If the equipment is to be scrapped, it should be rendered unusable (e.g. by cutting the cable and removing the plug)

and should be disposed of

according to current regulations.

Your local authority will be able to provide you with more information.

Please recycle the packaging!

Italiano

Gentile Cliente,

A row of identical gray rectangular blocks with no text or symbols

A row of identical gray rectangular blocks with no text or symbols

A row of identical gray rectangular blocks with no text or symbols

Podpis zákazníka

[15] Regulator temperature

A row of identical gray rectangular blocks with no text or symbols

Dampsystemets ydeevne .... ca. 1,0 l

A row of identical gray rectangular blocks with no text or symbols

A row of identical gray rectangular blocks with no text or symbols