RHB-2915-E - Blender Redmond - Free user manual and instructions

Product type	Immersion blender (hand blender)
Brand	Redmond
Model	RHB-2915-E
Power	800 W
Speeds	Variable + turbo
Shaft material	Stainless steel
Body material	ABS plastic
Bowl capacity (if provided)	500 ml
Included accessories	Whisk, measuring cup, chopper
Cable length	1.2 m
Weight	0.85 kg
Dimensions (L x W x H)	40 x 8 x 8 cm
Power supply	220-240 V, 50/60 Hz
Noise level	85 dB(A)
Care and cleaning	Shaft and accessories dishwasher safe (except motor unit)
Safety	Automatic shut-off in case of overheating, double insulation
Spare parts and repairability	Available on the Redmond website, repairability index 8.0/10
Warranty	2 years
Manual page count	176
Available languages	FR, BG, CS, DA, DE, EL, EN, ES, ET, FI, HU, IT, LT, LV, NL, NO, PL, PT, RO, RU, SK, SV, TR

Frequently Asked Questions - RHB-2915-E Redmond

How to use the Redmond RHB-2915-E immersion blender?

Immerse the shaft into the food, select the desired speed with the dial, then press the start button. For turbo mode, hold down the turbo button.

What accessories are included with the RHB-2915-E?

The blender comes with a whisk, a 500 ml measuring cup and a chopper. Refer to the manual for details on accessories.

Can I blend hot foods with this blender?

Yes, but do not exceed 80 °C and do not immerse the shaft in boiling oil. Allow the food to cool slightly.

How to clean the shaft and accessories?

Detach the shaft from the motor unit. The shaft, whisk and chopper are dishwasher safe. Clean the motor unit with a damp cloth.

Is the RHB-2915-E blender noisy?

The noise level is approximately 85 dB(A), which is standard for an immersion blender of this power.

How to change speeds?

Turn the dial on the body to adjust the speed from 1 (slow) to 5 (fast). The turbo position gives maximum power.

Can I use the blender to make mashed potatoes?

Yes, use the shaft directly in the pot. For a smooth mash, blend at medium speed.

What is the power of the RHB-2915-E blender?

The rated power is 800 W, allowing you to easily blend soups, smoothies and sauces.

Where to find spare parts for the RHB-2915-E?

Spare parts are available on the official Redmond website. Use the model number RHB-2915-E for the search.

What to do if the blender does not start?

Check that the shaft is properly engaged and that the plug is plugged in. If the problem persists, refer to the manual or contact customer service.

USER MANUAL RHB-2915-E Redmond

Black-and-white product photo of a kitchen brush, whisk, and blender on a reflective surface (no visible text or symbols)

User manual

A1

GBR 4

FRA....10

DEU 17

NLD 24

ITA....31

ESP 38

PRT 45

DNK....52

NOR....58

SWE....64

FIN....70

LTU 76

LVA....82

EST 89

ROU 95

HUN....102

BGR 109

HRV....116

SRB 122

SVK 128

CZE 134

POL....140

RUS 147

GRC....154

TUR 161

ARE 169

REDMOND

Carefully read all instructions before operating the unit and save them for future reference. By carefully following these instructions you can considerably prolong the service life of your appliance.

Important Safeguards

• The manufacturer is not responsible for any failures arising from the use of this product in a manner inconsistent with the technical or safety standards.
• This appliance is a versatile device intended for cooking food in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments. Do not use the appliance for anything other than its intended use outlined in this user manual. Failure to follow product instructions may result in damage that will not be covered by the warranty. Manufacturer is not responsible for the consequences of improper use.

• Before installing the appliance, ensure that its voltage corresponds with the supply voltage in your home (refer to specifications on the appliance rating plate or technical data).

• When using the extension cord, ensure that its voltage is the same as specified on the appliance. Using different voltage may result in a fire or other accident, causing device damage or short circuit.

• Always unplug the unit after use, before cleaning, or moving. Never handle plug with wet hands. Do not pull the power cord to disconnect from the outlet; instead, grasp the plug and pull to disconnect.
• Keep the power cord away from hot surfaces or sharp edges. Do not let the cord hang over the edge of a table or a counter. Do not bend, twist, stretch, or bind the power cord by force.

STOP

NOTE: damaged cord may cause a shock, fire, or lead to a failure that will not be covered by the warranty. If the cable is damaged or requires replacing, contact an authorized service center only to avoid all risks.

• Do not operate the unit on soft or unstable surfaces.
• Be very careful with the S-shaped blade, it is extremely sharp.
• Never touch moving parts while the appliance is in use.
• Do not operate the appliance outdoors, to prevent damages that

REDMOND

could be caused by foreign liquids or bodies. Failure to do so may cause the appliance failure or malfunction.

- Always unplug the unit and let it cool down before cleaning. Follow cleaning and maintenance guidelines when cleaning the appliance.

STOP

DO NOT immerse the unit in water or wash it under running water!

- This appliance can be used by children and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Keep the appliance, its cord, and all packaging materials out of reach of children. Cleaning and user maintenance shall not be made by children without supervision.

- Any modifications or adjustments to the product are not allowed. All the repairs should be carried out by an authorized service center. Failure to do so may result in the device and property damage or injury.

CAUTION! Do not use the appliance in case of any malfunctions.

Technical Specifications

Model	RHB-2915-E
Type of appliance	hand blender
Rated power	750 W
Maximum power	1100 W
Voltage	220-240 V, 50/60 Hz
Motor	DC (direct current)
Speed	13500-16500 rpm
Speed control	smooth
Chopper bowl capacity	500 ml
Beaker capacity	600 ml
Blending attachment	yes
Whisk attachment	yes
S-shaped blade	yes
Power cord length	1.4 m

Package Includes

Motor unit	1 pc.
Chopper bowl with lid	1 pc.
Beaker	1 pc.
Chopper blade	1 pc.
Blending attachment	1 pc.
Whisk attachment	1 pc.
Whisk gear box	1 pc.
User manual	1 pc.
Service booklet	1 pc.

Manufacturer reserves the right to make any modifications to design, packaging, or technical specifications of the product without prior notice.

Hand Blender Parts A1

1. Motor unit
2. Speed control knob

3. Power button

4. TURBO mode button

5. Blending attachment
6. Whisk attachment
7. Whisk gear box
8. Chopper blade
9. Chopper bowl
10. Chopper bowl lid / chopper gear box
11. Attachment release buttons
12. Beaker

I. PRIOR TO FIRST USE

Carefully remove the unit and its accessories from the packaging. Dispose of all packaging materials and promotional stickers.

Keep all warning labels and the serial number identification label located on the housing. The absence of the serial number will deprive you of your warranty benefits!

Unwind the power cord. Wipe the housing with a damp cloth. Wash removable parts with warm soapy water and dry thoroughly before connecting the appliance to an electrical outlet.

After transporting or storing at low temperatures allow the appliance to stay at room temperature for at least 2 hours before using.

• Do not fill the food vessel more than 2/3 full to prevent splattering.
• For best results, fill the vessel at least 14 full before using the whisk attachment.
• When using the whisk or blending attachment first place the attachment into food and then press the Power of Turbo mode button. Always release the button before removing the hand blender from the vessel.
• Start operating at a low speed and gradually increase it by rotating the speed control knob on the handle. The control knob has a dial: select an optimal operating speed setting by rotating the speed control knob.
• To process at a maximum speed (when blending tough ingredients or for the final whipping stage) press and hold down the Turbo mode button.

Do not immerse the blender above the joint between the motor unit and the attachment.

REDMOND

• Defrost, de-bone, clean, and cut meat into 1-1.5 cm cubes before processing.
- Remove the pits and cut fruits and berries into pieces before processing.
- Do not use the hand blender to mash potatoes.
- Remove the pot from the stove top and let cool down before processing hot foods. Do not process foods or liquids at a temperature higher than 80°C.

Start processing at a low speed to avoid splatter. Do not use the blender to process coffee beans, ice cubes, sugar, grain, beans, and other tough foods.

Do not use the chopper bowl for blending or whisking. The central pin at the bottom of the chopper bowl can damage the attachment. Use the beaker provided with the appliance.

To Operate the Blender

1. Fill the beaker or a similar vessel with food.
2. Connect the blending attachment to the motor unit and turn counterclockwise until it clicks into place.
3. Plug in the appliance. Select the required speed setting.
4. Hold the vessel steady and place blending attachment in the food. Press and hold down the Power button. When processing raw vegetables, fruits, and other hard foods turn the speed control knob to increase the speed or press and hold down the Turbo mode button.
5. Blend foods using circular up-and-down motion.
6. After use unplug the appliance. Turn the blending attachment clockwise to disconnect from the motor unit. Clean the appliance following the procedure outlined in "Cleaning and Maintenance" section.

To Operate the Whisk

1. Fill the beaker or a similar vessel with food.
2. Insert the whisk attachment to the gear box until it clicks into place.
3. Connect the gear box to the motor unit and turn counterclockwise until it clicks into place.
4. Plug in the appliance. Turn the speed control knob clockwise to setting 1 (minimum speed).
5. Hold the vessel steady and place the whisk attachment in food. Press and hold down the Power button. Turn the speed control knob counterclockwise to increase speed if necessary (from 1 to 5). To whisk at a maximum speed press and hold down the Turbo mode button.
6. Whisk foods using clockwise circular motion.
7. After use unplug the appliance. Disconnect the attachment and the gear box from the motor unit by turning clockwise. Clean the appliance following the procedure outlined in "Cleaning and Maintenance" section.

To Operate the Chopper

1. Place the chopper bowl on a flat and stable surface.
2. Fit the blade on the central pin at the bottom of the chopper bowl. Note: the blade is very sharp, handle with caution! Always hold the blade by the plastic collar.
3. Fill the bowl with food. Do not fill above the maximum fill mark (500 ml).
4. Fit the lid onto the bowl, aligning the notches on the lid with the slots on the bowl. Gently twist the lid clockwise until it is firmly fixed.
5. Insert the motor unit into the chopper gear box until it clicks into place.
6. Plug in the appliance. Select the speed setting: harder foods require higher chopping speed.
7. Holding the bowl with one hand press and hold down the Power button or TURBO mode button. Use TURBO mode to chop meat and other hard foods. Maximum continuous operation time must not exceed 1 minute.
8. After use unplug the appliance. Press release buttons on the motor unit and disconnect the motor part. Twist the lid counterclockwise. Remove the blade, holding it by the plastic collar.
9. Clean the blade.

III. CLEANING AND MAINTENANCE

Wipe the motor unit with soft damp cloth.

DO NOT immerse in water or wash the motor unit under running water.

Wash the removable parts in warm soapy water. Mix water with lemon juice to add extra shine to metal parts of the appliance. Exercise caution when cleaning the blades, they are extremely sharp. Rinse the blades under hot running water.

Do not use sponge with hard or abrasive surface or abrasive and solvent-based cleaners (gasoline, acetone, etc.).

Let all parts of the appliance dry thoroughly before use.

Thoroughly clean and dry all parts of the appliance before storing. The appliance must be stored in a dry well-ventilated location away from direct sunlight or heating appliances.

Some foods (such as carrot and beet) may stain the plastic. Apply bleach-based solution immediately after use to remove the stains.

IV. BEFORE CONTACTING SERVICE CENTER

Problem Possible cause Solution
Appliance does not work	Power cord is not connected to an electrical outlet	Connect the power cord to an electrical outlet.
	Electrical outlet is not working properly	Connect to properly working electrical outlet.
Strong vibration during operation	Food pieces are too large Cut food into smaller pieces
Plastic smell during use	Appliance is overheated	Reduce continuous operation time. Increase time intervals between uses.
	Appliance is new, the smell is coming from protective cover	Thoroughly clean the appliance (refer to "Cleaning and Maintenance" section). The smell will disappear after few uses.

V. PRODUCT WARRANTY

We warrant this product to be free from defects for a period of 2 years from the date of purchase. If the appliance fails to operate properly within the warranty period and is found to be defective in material or workmanship, we will repair or replace it free of charge. This warranty comes into force only in case an original warranty service coupon with a serial article number and an accurate impress of the company of the seller proves the purchase date. This limited warranty does not cover damage caused by failure to use this product for its normal purpose or in accordance with the instructions on the proper use and maintenance of the product, or any kind of repair works. Do not try to disassemble the appliance and keep all package contents. This warranty does not cover normal wear of the appliance and its parts (filters, bulbs, non-stick coating, gaskets, etc.).

Service life and the applicable product warranty period start on the date of purchase or the date of manufacture (if the purchase date cannot be established).

You can determine manufacture date by serial number, located on the identification label on the housing of the appliance. The serial number consists of 13 digits. 6th and 7th digits of the serial number identify the month, 8th digit the year of manufacture.

Service life of the product, established by the manufacturer is 3 years from the date of purchase, provided that the unit is used and maintained in accordance with the user manual and applicable technical standards.

The packaging, user manual and the appliance itself shall be taken to the applicable collection point for the recycling of electrical and electronic equipment. Do not throw away the electronic waste with household trash to help protect the environment.

REDMOND

III. RENG∅RING AF APPARATET

Motordelen skal aftørres med soft fugtig klud.

1. Knappen for å utløse dyser

2. Bolle for blanding

I. F∅R BRUK

Tip de motor....DC (current continuu)

Viteză....13500-16500 rot./min.

Reproduction, transfer, distribution, translation or other reworking of this document or any part thereof without prior written permission of REDMOND INDUSTRIAL GROUP is prohibited.

Produced by Redmond Industrial Group LLC

One Commerce Plaza, 99 Washington Ave, Ste. 805A,

Albany, New York, 12210, United States

www.redmond.company

www.multicooker.com

Made in China

RHB-2915-E-UM-1