Skyfloor RSF-171S - Climate control Redmond - Free user manual and instructions
Find the device manual for free Skyfloor RSF-171S Redmond in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner / Heater |
| Model | Skyfloor RSF-171S |
| Brand | Redmond |
| Cooling Capacity | 7000 BTU/h (approx.) |
| Heating Capacity | 5000 BTU/h (approx.) |
| Power Supply | 220-240V ~ 50Hz, 1200W |
| Dimensions (W x D x H) | 35 x 35 x 70 cm |
| Weight | 12 kg |
| Noise Level | ≤ 52 dB(A) |
| Airflow | 280 m³/h |
| Refrigerant | R410A |
| Control Type | Remote control + Touch panel |
| Timer | 24-hour programmable timer |
| Modes | Cool, Heat, Fan, Dehumidify |
| Fan Speeds | 3 speeds (Low, Medium, High) |
| Dehumidification | 1.0 L/h |
| Water Tank Capacity | 1.5 L (auto-evaporation) |
| Installation | Floor-standing with exhaust hose |
| Filter | Washable mesh filter |
| Cleaning | Weekly filter cleaning recommended |
| Safety Features | Overheat protection, tip-over switch, child lock |
| Spare Parts | Filter, remote control, exhaust hose (available) |
| Repairability | Moderate; accessible components |
| Warranty | 1 year (depending on region) |
| Accessories Included | Remote control, exhaust hose kit, window adapter |
Frequently Asked Questions - Skyfloor RSF-171S Redmond
How do I set the timer on my Redmond Skyfloor RSF-171S?
Press the Timer button on the remote or control panel. Use the + and - buttons to set the desired hours (1-24). The appliance will turn on or off after the set time.
Why is my air conditioner not cooling properly?
Check if the air filter is dirty. Clean or replace it. Ensure the exhaust hose is properly vented and not kinked. Also verify that the room size is within the unit's capacity.
How often should I clean the filter?
Clean the washable mesh filter every 2 weeks during regular use. More frequent cleaning may be needed if the unit is used in dusty environments.
Can I use the heater function without the exhaust hose?
No, the exhaust hose must be connected for both cooling and heating modes to expel hot air (in cooling) or cold air (in heating) and maintain proper airflow.
What does the 'E1' error code mean?
The E1 error indicates a sensor malfunction. Turn off the unit, unplug it for a few minutes, then restart. If the error persists, contact customer support.
How do I switch between cooling and heating?
Press the Mode button repeatedly to cycle through Cool, Heat, Fan, and Dehumidify modes. The selected mode will be displayed on the screen.
Is the Skyfloor RSF-171S energy efficient?
It has an Energy Efficiency Ratio (EER) of approximately 2.5, which is standard for portable units. Using the timer and setting an appropriate temperature can improve efficiency.
What is the recommended room size for this unit?
The Skyfloor RSF-171S is suitable for rooms up to 20 m² (215 sq ft) for cooling and up to 15 m² for heating, depending on insulation.
How do I control the unit without the remote?
Use the control panel on the unit itself. Press the buttons for power, mode, fan speed, and temperature adjustments directly.
What should I do if water leaks from the unit?
Check the drain plug and water tank. If the internal tank is full, drain it. Ensure the unit is level. If leaking continues, inspect the hose connections for damage.
User questions about Skyfloor RSF-171S Redmond
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Climate control in PDF format for free! Find your manual Skyfloor RSF-171S - Redmond and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Skyfloor RSF-171S by Redmond.
USER MANUAL Skyfloor RSF-171S Redmond
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Redmond
Model : Skyfloor RSF-171S
Category : Climate control