549010 - Heated blanket PRINCESS - Free user manual and instructions

Product type	Heated blanket
Brand	Princess
Model	549010
Dimensions (L x W)	180 x 130 cm
Weight	1.5 kg
Power supply	220-240 V ~ 50-60 Hz
Power	100 W
Heat levels	3 settings (low, medium, high)
Automatic shut-off	Yes, after 2 hours
Preheating	Yes, quick heat function
Machine washable	Yes, at 30 °C
Care	Machine washable, do not bleach, do not iron
Safety	Overheat protection, CE certified
Power cord	Detachable, length 2 m
Fabric types	Soft fleece, microfibre
Color	Anthracite grey
Warranty	2 years
Repairability	Spare parts not available, contact customer service

Frequently Asked Questions - 549010 PRINCESS

Can I machine wash the Princess 549010 heated blanket?

Yes, the blanket is machine washable at 30 °C. Before washing, unplug the blanket and remove the detachable power cord. Use a delicate cycle and avoid bleach and ironing.

Does the heated blanket turn off automatically?

Yes, it has an automatic shut-off after 2 hours of continuous operation to prevent overheating and save energy.

Can I use the blanket all night?

It is recommended not to leave the blanket on all night. Use the auto shut-off function or set a timer. For prolonged use, choose a low heat level.

Is the blanket safe for elderly or children?

Yes, it is equipped with overheat protection and complies with CE safety standards. However, supervision is recommended for persons with reduced mobility or children. Do not use on infants.

How to adjust the temperature?

The blanket has 3 heat levels (low, medium, high) controlled by a switch on the cable. Press the button to cycle through levels. An indicator light shows when it is on.

Can I use the blanket with a heating pillow?

Yes, you can combine multiple Princess heating products on the same circuit, but ensure the total power does not exceed the circuit capacity (usually 2000 W).

Is the heated blanket suitable for double beds?

The 549010 model measures 180 x 130 cm, suitable for a single bed or one person. For a double bed, choose a larger model (e.g., 180x200 cm).

What to do if the blanket stops heating?

First check the electrical outlet and the connection of the detachable power cord. If the problem persists, contact Princess customer service. Do not attempt to repair yourself.

Can I fold the blanket while it is on?

No, never fold the blanket while it is on as this can cause overheating and damage the heating wires. Turn it off and unplug before folding or storing.

How to clean stains?

For localized stains, clean with a damp cloth and a little mild detergent. Avoid abrasive products. For deep cleaning, machine wash according to instructions.

USER MANUAL 549010 PRINCESS

You have purchased a KooZzzi product. Our aim is to provide quality products with a tasteful design and at an affordable price. We hope that you will enjoy this product for many years.

Description (fig. A)

Your 549010/549011 KooZzzi electric pillow has been designed for soothing and relaxing your body. The pillow is equipped with a thermal protection system that regulates the heat and prevents the pillow from becoming too hot. The pillow is suitable for indoor use only. The pillow is suitable for domestic use only.

1. Electronic control unit
2. Heat control switch
3. Display
4. Pillow
5. Pillow cover
6. Zip

Initial use

Before you proceed, we need you to pay attention to the following notes:

- Make sure that there is sufficient space around the pillow to allow heat to escape and provide sufficient ventilation.

Clean the pillow cover. Refer to the section • "Cleaning and maintenance".

Note: If you switch on the pillow for the first time, it may emit a characteristic smell for a short period. This is normal operation.

Use

Before you proceed, we need you to pay attention to the following notes:

• Before inserting the mains plug into the wall socket, always set the heat control switch to position '0'.
• Do not use the pillow with a higher temperature than required.
• Do not use the pillow without the pillow cover. Put the pillow cover around the pillow.

The temperature of the pillow without a pillow cover can be too high for the sensitive skin.

- Do not leave the pillow unattended during use.

Put the pillow cover (5) around the pillow • (4). Close the pillow cover (5) using the zip (6). Place the pillow (4) on the required part of • the body. Insert the mains plug into the wall socket. • Set the heat control switch (2) to position • '3'. The pillow (4) starts to heat up. The temperature setting is shown on the display (3).

Note: Regularly check the temperature of the pillow on the back of your hand. If the temperature feels warm on your hand, it might well be too hot for the surface of your skin.

Wait for approximately 15 minutes until the · pillow (4) has reached the set temperature. Set the heat control switch (2) to the · required position:

• Set the heat control switch (2) to position '1' for a low temperature. The temperature setting is shown on the display (3).
• Set the heat control switch (2) to position '2' for a medium temperature. The temperature setting is shown on the display (3).
• Set the heat control switch (2) to position '3' for a high temperature. The temperature setting is shown on the display (3).

If the temperature becomes too high, set a lower temperature using the heat control switch (2).

To switch off the pillow, set the heat control switch (2) to position '0'.

Note: The pillow switches off automatically after approximately 90 minutes. To switch on the pillow again, set the heat control switch to position '0', wait for 5 seconds and set the heat control switch back to the required position.

After use, switch off the pillow, remove the • mains plug from the wall socket and wait until the pillow has cooled down.

Cleaning and maintenance (fig. A)

Before you proceed, we need you to pay attention to the following notes:

• Before cleaning or maintenance, switch off the pillow, remove the mains plug from the wall socket and wait until the pillow has cooled down.
• Do not immerse the pillow or the electronic control unit in water or any other liquids.

Before you proceed, we would like you to focus your attention on the following notes:

• Do not clean the pillow.
• Do not clean the electronic control unit.
• Do not use aggressive or abrasive cleaning agents to clean the pillow cover.
• Do not use bleach to clean the pillow cover.
• Do not iron the pillow.

Clean the pillow cover in the washing · machine (max. 30 °C). Dry the pillow cover in the tumble dryer at a low temperature or allow the pillow cover to dry naturally.

After cleaning, put the pillow with the • pillow cover and the electronic control unit in the original packaging.

Store the packaging in a dry and frost-free • place, out of the reach of children.

Safety instructions

General safety

Read the manual carefully before use. · Keep the manual for future reference.

Only use the appliance and the accessories • for their intended purposes. Do not use the appliance and the accessories for other purposes than described in the manual.

Do not use the appliance if any part or any accessory is damaged or defective. If a part or an accessory is damaged or defective, it must be replaced by the manufacturer or an authorised repair agent.

Children should be supervised to ensure that they do not play with the appliance.

The use of this appliance by children or persons with a physical, sensory, mental or motorial disability, or lack of experience and knowledge can give cause to hazards. Persons responsible for their safety should give explicit instructions or supervise the use of the appliance.

The appliance must not be used by infants, · helpless people or people who are insensitive to heat.

The appliance must not be used by young children unless the controls have been preset by a parent or a guardian, or unless the child has been adequately instructed on how to safely operate the controls.

Do not use the appliance near bathtubs, • showers, basins or other vessels containing water.

Do not immerse the pillow in water or other liquids. If the pillow is immersed in water or other liquids, do not remove it with your hands. Immediately remove the mains plug from the wall socket. If the pillow is immersed in water or other liquids, do not use it again.

Do not immerse the electronic control unit in water or other liquids. If the electronic control unit is immersed in water or other liquids, do not remove it with your hands. Immediately remove the mains plug from the wall socket. If the electronic control unit is immersed in water or other liquids, do not use it again.

Electrical safety

Before use, always check that the mains • voltage is the same as the voltage on the rating plate of the appliance.

The appliance is not intended to be operated by means of an external timer or separate remote-control system.

Make sure that water cannot enter the contact plugs of the mains cable.

• Always fully unwind the mains cable.
- Make sure that the mains cable does not hang over the edge of a worktop and cannot be caught accidentally or tripped over.
- Keep the mains cable away from heat, oil and sharp edges.
- Do not use the appliance if the mains cable or the mains plug is damaged or defective. If the mains cable or the mains plug is damaged or defective, it must be replaced by the manufacturer or an authorised repair agent.

Do not pull the mains cable to disconnect • the mains plug from the mains.

Disconnect the mains plug from the mains • when the appliance is not in use, before assembly or disassembly and before cleaning and maintenance.

Safety instructions for electric pillows

Do not use the pillow outdoors.

Do not use the pillow for medical purposes. The pillow is not suitable for use in hospitals, doctor's surgeries, etc.

Do not use the pillow in humid surroundings. · Keep the pillow away from heat sources. · Make sure that the pillow does not come · into contact with flammable material.

Make sure that there is sufficient space · around the pillow to allow heat to escape and provide sufficient ventilation.

If you are unable to feel heat or cold, do not use the pillow.

If you have diabetes or another condition that causes poor blood circulation, consult with your health care provider before use.

If you have a pacemaker, consult with your health care provider before use.

Make sure that you do not fall asleep · during use.

Do not use the pillow if your hands are wet. Only use the pillow with the supplied electronic control unit.

Only use the pillow when it is unfolded. Do not use the pillow when it is folded, crumpled or otherwise deformed. Do not use the pillow if it is wet.

- Do not insert foreign objects into the pillow. Do not insert foreign objects into the pillow cover.

- Do not puncture the pillow with sharp objects. Do not puncture the pillow cover with sharp objects.

- Do not place large or heavy objects on the pillow or on the electronic control unit.

- Do not leave the pillow unattended when the mains plug is connected to the mains.

- Regularly check the pillow for signs of wear or damage. If the pillow shows signs of wear or damage or if it has been misused, return it to the supplier before further use.

- Before storing the pillow, allow it to cool down completely. Store the pillow in the original packaging when not in use. Store the pillow in a dry and frost-free place, out of the reach of children.

U.K. Wiring instructions

The wires in the mains lead are coloured in accordance with the following code:

As the colours of the wire in the mains lead of this appliance may not correspond with the colour markings identifying the terminals on your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red.

If a 13Amp (BS1363) plug is used, a 13Amp (BS1362) fuse must be fitted, or if any other type of plug is used, a 13Amp fuse must be fitted, either in the plug or adaptor, or on the distribution board.

This is a double-insulated appliance and does not need an earth connection.

Warning! On no account should either the live or neutral wires be connected to the earth terminal.

Disclaimer

Subject to change; specifications can be changed without further notice.

Félicitations!