549012 - Heated blanket PRINCESS - Free user manual and instructions

Product type	Heating blanket
Brand	Princess
Model	549012
Dimensions	180 x 130 cm
Weight	1.5 kg
Power supply	220-240 V ~ 50 Hz
Power	100 W
Number of heat levels	6
Auto shut-off function	Yes, after 3 hours
Material	Soft fleece
Machine washable	Yes, with detachable connector
Safety	Overheat protection
Remote control	Yes, with temperature control
Colour	Grey
Certifications	CE, GS
Warranty	2 years

Frequently Asked Questions - 549012 PRINCESS

How to wash the Princess 549012 heating blanket?

Detach the connector before washing. Machine wash the blanket at 30°C on a delicate cycle. Do not use bleach or fabric softener. Air dry, do not iron.

Can I leave the heating blanket on all night?

Yes, thanks to the auto shut-off after 3 hours. You can also choose a shorter timer for more safety.

How to adjust the temperature on model 549012?

Use the provided remote control to select from 6 heat levels. Level 1 is the mildest, level 6 the warmest.

Is the blanket suitable for bunk beds or children?

This model is designed for adults. It is not recommended for children under 3 years old. For older children, use under supervision.

What to do if the blanket stops heating?

First check the cable connection and the plug. If the problem persists, contact Princess after-sales service. Do not attempt to repair yourself.

Does the heating blanket consume a lot of electricity?

With a power of 100 W, it consumes about 0.1 kWh per hour. This represents a very low cost, comparable to a light bulb.

Can I use the blanket on a memory foam mattress?

Yes, the blanket is compatible. Ensure it is flat and do not fold it to avoid hot spots.

How to store the blanket in summer?

Fold it without compressing it too much and store it in a dry place. Do not place heavy objects on it to preserve the heating elements.

Does the blanket have a warranty?

Yes, Princess offers a 2-year warranty against manufacturing defects. Keep your receipt.

Is it safe to fold the blanket while in use?

No, never fold the blanket when it is on. This could cause local overheating. It must remain flat.

USER MANUAL 549012 PRINCESS

Line drawing of a medical device with a looped cable and connector (no text or symbols)

KOOZZZI.

Gefeliciteerd!

You have purchased a KooZzzi product. Our aim is to provide quality products with a tasteful design and at an affordable price. We hope that you will enjoy this product for many years.

Description (fig. A)

Your 549012 KooZzzi electric pillow has been designed for soothing and relaxing your body. The pillow is equipped with a thermal protection system that regulates the heat and prevents the pillow from becoming too hot. The pillow is suitable for indoor use only. The pillow is suitable for domestic use only.

1. Electronic control unit
2. Heat control switch
3. Display
4. Pillow
5. Pillow cover
6. Zip

Initial use

Before you proceed, we need you to pay attention to the following notes:

- Make sure that there is sufficient space around the pillow to allow heat to escape and provide sufficient ventilation.

Clean the pillow cover. Refer to the section • "Cleaning and maintenance".

Note: If you switch on the pillow for the first time, it may emit a characteristic smell for a short period. This is normal operation.

Use

Before you proceed, we need you to pay attention to the following notes:

• Before inserting the mains plug into the wall socket, always set the heat control switch to position '0'.
• Do not use the pillow with a higher temperature than required.
• Do not use the pillow without the pillow cover. Put the pillow cover around the pillow.

The temperature of the pillow without a pillow cover can be too high for the sensitive skin.

- Do not leave the pillow unattended during use.

Put the pillow cover (5) around the pillow • (4). Close the pillow cover (5) using the zip (6). Place the pillow (4) on the required part of • the body. Insert the mains plug into the wall socket. • Set the heat control switch (2) to position • '3'. The pillow (4) starts to heat up. The temperature setting is shown on the display (3).

Note: Regularly check the temperature of the pillow on the back of your hand. If the temperature feels warm on your hand, it might well be too hot for the surface of your skin.

Wait for approximately 15 minutes until the · pillow (4) has reached the set temperature. Set the heat control switch (2) to the · required position:

• Set the heat control switch (2) to position '1' for a low temperature. The temperature setting is shown on the display (3).
• Set the heat control switch (2) to position '2' for a medium temperature. The temperature setting is shown on the display (3).
• Set the heat control switch (2) to position '3' for a high temperature. The temperature setting is shown on the display (3).

If the temperature becomes too high, set a lower temperature using the heat control switch (2).

To switch off the pillow, set the heat control switch (2) to position '0'.

Note: The pillow switches off automatically after approximately 90 minutes. To switch on the pillow again, set the heat control switch to position '0', wait for 5 seconds and set the heat control switch back to the required position.

After use, switch off the pillow, remove the • mains plug from the wall socket and wait until the pillow has cooled down.

Cleaning and maintenance (fig. A)

Before you proceed, we need you to pay attention to the following notes:

• Before cleaning or maintenance, switch off the pillow, remove the mains plug from the wall socket and wait until the pillow has cooled down.
• Do not immerse the pillow or the electronic control unit in water or any other liquids.

Before you proceed, we would like you to focus your attention on the following notes:

• Do not clean the pillow.
• Do not clean the electronic control unit.
• Do not use aggressive or abrasive cleaning agents to clean the pillow cover.
• Do not use bleach to clean the pillow cover.
• Do not iron the pillow.

Clean the pillow cover in the washing · machine (max. 30 °C). Dry the pillow cover in the tumble dryer at a low temperature or allow the pillow cover to dry naturally.

After cleaning, put the pillow with the • pillow cover and the electronic control unit in the original packaging.

Store the packaging in a dry and frost-free • place, out of the reach of children.

Safety instructions

General safety

Read the manual carefully before use. · Keep the manual for future reference.

Only use the appliance and the accessories • for their intended purposes. Do not use the appliance and the accessories for other purposes than described in the manual.

Do not use the appliance if any part or any accessory is damaged or defective. If a part or an accessory is damaged or defective, it must be replaced by the manufacturer or an authorised repair agent.

Children should be supervised to ensure that they do not play with the appliance.

The use of this appliance by children or persons with a physical, sensory, mental or motorial disability, or lack of experience and knowledge can give cause to hazards. Persons responsible for their safety should give explicit instructions or supervise the use of the appliance.

The appliance must not be used by infants, · helpless people or people who are insensitive to heat.

The appliance must not be used by young children unless the controls have been preset by a parent or a guardian, or unless the child has been adequately instructed on how to safely operate the controls.

Do not use the appliance near bathtubs, • showers, basins or other vessels containing water.

Do not immerse the pillow in water or other liquids. If the pillow is immersed in water or other liquids, do not remove it with your hands. Immediately remove the mains plug from the wall socket. If the pillow is immersed in water or other liquids, do not use it again.

Do not immerse the electronic control unit in water or other liquids. If the electronic control unit is immersed in water or other liquids, do not remove it with your hands. Immediately remove the mains plug from the wall socket. If the electronic control unit is immersed in water or other liquids, do not use it again.

Electrical safety

Before use, always check that the mains voltage is the same as the voltage on the rating plate of the appliance.

The appliance is not intended to be operated by means of an external timer or separate remote-control system.

Make sure that water cannot enter the contact plugs of the mains cable.

• Always fully unwind the mains cable.
- Make sure that the mains cable does not hang over the edge of a worktop and cannot be caught accidentally or tripped over.
- Keep the mains cable away from heat, oil and sharp edges.
- Do not use the appliance if the mains cable or the mains plug is damaged or defective. If the mains cable or the mains plug is damaged or defective, it must be replaced by the manufacturer or an authorised repair agent.

Do not pull the mains cable to disconnect • the mains plug from the mains.

Disconnect the mains plug from the mains · when the appliance is not in use, before assembly or disassembly and before cleaning and maintenance.

Safety instructions for electric pillows

Do not use the pillow outdoors.

Do not use the pillow for medical purposes. The pillow is not suitable for use in hospitals, doctor's surgeries, etc.

Do not use the pillow in humid surroundings. · Keep the pillow away from heat sources. · Make sure that the pillow does not come · into contact with flammable material.

Make sure that there is sufficient space · around the pillow to allow heat to escape and provide sufficient ventilation.

If you are unable to feel heat or cold, do not use the pillow.

If you have diabetes or another condition that causes poor blood circulation, consult with your health care provider before use.

If you have a pacemaker, consult with your health care provider before use.

Make sure that you do not fall asleep · during use.

Do not use the pillow if your hands are wet. Only use the pillow with the supplied electronic control unit.

Only use the pillow when it is unfolded. Do not use the pillow when it is folded, crumpled or otherwise deformed.

Do not use the pillow if it is wet.

- Do not insert foreign objects into the pillow. Do not insert foreign objects into the pillow cover.

- Do not puncture the pillow with sharp objects. Do not puncture the pillow cover with sharp objects.

- Do not place large or heavy objects on the pillow or on the electronic control unit.

- Do not leave the pillow unattended when the mains plug is connected to the mains.

- Regularly check the pillow for signs of wear or damage. If the pillow shows signs of wear or damage or if it has been misused, return it to the supplier before further use.

- Before storing the pillow, allow it to cool down completely. Store the pillow in the original packaging when not in use. Store the pillow in a dry and frost-free place, out of the reach of children.

U.K. Wiring instructions

The wires in the mains lead are coloured in accordance with the following code:

BLUE NEUTRAL

BROWN LIVE

As the colours of the wire in the mains lead of this appliance may not correspond with the colour markings identifying the terminals on your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red.

If a 13Amp (BS1363) plug is used, a 13Amp (BS1362) fuse must be fitted, or if any other type of plug is used, a 13Amp fuse must be fitted, either in the plug or adaptor, or on the distribution board.

This is a double-insulated appliance and does not need an earth connection.

Warning! On no account should either the live or neutral wires be connected to the earth terminal.

Disclaimer

Subject to change; specifications can be changed without further notice.

Félicitations!